Návod k obsluze střešních nosičů Yakima CarshopXXL S25Y s rovnou/smíšenou výškou (950 mm a 1000 mm)

1. Úvod

This manual provides comprehensive instructions for the safe and effective installation, operation, and maintenance of your Yakima CarshopXXL S25Y Flush/Mixed Roof Bars. Please read this manual thoroughly before installation and retain it for future reference.

The Yakima CarshopXXL S25Y roof bar system is designed to provide a secure and versatile platform for transporting various gear on your vehicle's roof. This specific model includes one 950mm bar and one 1000mm bar, suitable for vehicles requiring different length bars for front and rear positions.

2. Bezpečnostní informace

VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k vážnému zranění nebo poškození majetku.

• Always ensure all components are securely fastened before driving. Check tightness regularly, especially after initial installation and before each trip.
• Do not exceed the maximum load capacity specified for your vehicle's roof or the roof bars, whichever is lower. Refer to your vehicle's owner's manual for roof load limits.
• Distribute the load evenly on the roof bars. Secure all cargo properly to prevent shifting during transit.
• Be aware of increased vehicle height and width when roof bars and cargo are installed. Exercise caution in low-clearance areas (e.g., garages, car washes) and when parking.
• Adjust driving speed to suit road conditions, especially with a loaded roof rack. Crosswinds and sudden braking can affect vehicle stability.
• Inspect roof bars and mounting points periodically for wear, damage, or corrosion. Replace damaged components immediately.
• Do not modify the roof bars or their components. Use only genuine Yakima replacement parts.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1 x Yakima CarshopXXL S25Y Flush Bar (950mm length)
• 1 x Yakima CarshopXXL S25Y Flush Bar (1000mm length)
• 4 x Mounting Towers/Feet
• 4 x End Caps with Locks (keys included)
• Vehicle-specific fitting kit (sold separately or included based on retailer)
• Návod k použití (tento dokument)

Obrázek 3.1: Nadview of the Yakima CarshopXXL S25Y Flush/Mixed Roof Bars. This image shows the two roof bars with their end caps, ready for installation.

4. Nastavení a instalace

Poznámka: Installation procedures may vary slightly depending on your specific vehicle model and the type of roof rails or mounting points it possesses. Always refer to the vehicle-specific fitting instructions provided with your mounting kit.

1. Identify Bar Lengths: The S25Y system includes one 950mm bar and one 1000mm bar. Typically, the longer bar is used for the front position and the shorter for the rear, but this can vary by vehicle. Consult your vehicle-specific fitting guide.
2. Assemble Towers: Attach the mounting towers (feet) to the roof bars. Ensure they are correctly oriented according to the arrows or markings on the components.
3. Pozice na vozidle: Carefully place the assembled roof bars onto your vehicle's roof. The mounting towers should align with your vehicle's designated roof rail attachment points or flush rail system.
4. Bezpečná montáž: Using the provided tools and hardware from your vehicle-specific fitting kit, securely fasten the mounting towers to your vehicle's roof. Tighten all bolts evenly until firm, but do not overtighten.
5. Install End Caps: Once the bars are securely mounted, attach the end caps. These often include integrated locks for security. Ensure they click into place or are fastened as per instructions.

Obrázek 4.1: Detail of a Yakima roof bar end cap with integrated lock, shown securely mounted on a vehicle's flush roof rail. This illustrates the secure attachment point.

Obrázek 4.2: The Yakima CarshopXXL S25Y roof bars fully installed on a vehicle's roof. This image demonstrates the flush, low-profile appearance of the system.

5. Návod k obsluze

Once installed, your Yakima roof bars are ready for use. Always adhere to the following guidelines:

• Nakládání nákladu: Place cargo evenly across the roof bars. Avoid concentrating heavy loads in one area.
• Zajištění nákladu: Use appropriate tie-downs, straps, or specialized carriers (e.g., bike racks, ski carriers, cargo boxes) to secure your load. Ensure cargo cannot shift, slide, or become dislodged during travel.
• Zkontrolujte vůli: Before driving, visually check that all cargo is clear of the vehicle's antenna, sunroof, and rear hatch when opened.
• Pravidelné kontroly: During long journeys, stop periodically to check that the roof bars and cargo remain securely fastened.

6. Údržba

Proper maintenance ensures the longevity and safe operation of your roof bars:

• Čištění: Clean the roof bars regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish or materials.
• Inspekce: Periodically inspect all bolts, straps, and mounting points for tightness, wear, or damage. Pay close attention to rubber components for cracking or deterioration.
• Mazání: If applicable, lubricate locks and moving parts with a silicone-based lubricant to prevent seizing.
• Skladování: If removing the roof bars for extended periods, store them in a dry, protected area away from direct sunlight and extreme temperatures.

7. Řešení problémů

Zde jsou řešení běžných problémů, se kterými se můžete setkat:

8. Specifikace

9. Záruka a podpora

For warranty information, product registration, or technical support, please visit the official Yakima webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

Online zdroje:

• Yakima Official Webmísto
• Yakima Support Page