1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your PROFLO PFWO903 Waste and Overflow Push/Pull Stopper. Designed for durability and reliability, this stopper features a robust brass and zinc construction with a chrome finish, ensuring long-lasting performance and resistance to rust and corrosion in everyday use. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.
2. Důležité bezpečnostní informace
- Always turn off the main water supply to the fixture before attempting any plumbing work.
- Během instalace používejte vhodné osobní ochranné prostředky, jako jsou ochranné brýle a rukavice.
- Ujistěte se, že všechna připojení jsou bezpečná, aby nedošlo k únikům.
- Pokud si nejste jisti některým krokem, poraďte se s kvalifikovaným instalatérem.
- Udržujte malé části mimo dosah dětí.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou přítomny všechny komponenty.
- PROFLO PFWO903 Waste and Overflow Push/Pull Stopper Assembly (Chrome)
Image 1: The PROFLO PFWO903 Waste and Overflow Push/Pull Stopper in chrome finish. This image displays the complete stopper assembly, including the visible chrome cap and the internal brass mechanism.
4. Tools and Materials Required (Not Included)
- Instalatérský tmel nebo silikonový tmel
- Nastavitelný klíč nebo kleště
- Screwdriver (if removing existing drain components)
- Rags or Towels
5. Instalační příručka
5.1. Než začnete
- Ensure the bathtub drain opening is clean and free of debris.
- If replacing an existing stopper, carefully remove the old unit and clean any old sealant residue from the drain opening.
5.2. Postup instalace
- Prepare the Stopper: Apply a thin bead of plumber's putty or silicone sealant around the underside of the stopper's flange (the chrome rim that sits on the tub surface).
- Vložení do odpadu: Carefully insert the stopper assembly into the bathtub drain opening. Ensure the flange is centered and seated properly.
- Zabezpečení zespodu: From underneath the bathtub, thread the drain shoe onto the stopper assembly. Hand-tighten first, then use an adjustable wrench or pliers to gently tighten until snug. Do not overtighten, as this can damage the tub or drain components.
- Wipe Excess Sealant: Wipe away any excess plumber's putty or silicone sealant that squeezes out from under the flange.
- Zkouška těsnosti: Fill the bathtub with water and allow it to sit for a few minutes. Check underneath the tub for any signs of leaks around the drain connection. If leaks are detected, tighten the connection slightly or reapply sealant if necessary.
Obrázek 2: Strana A view of the PROFLO PFWO903 Waste and Overflow Push/Pull Stopper, highlighting the brass stem and the chrome push/pull mechanism. This view helps in understanding the internal components during installation.
6. Provoz
The PROFLO PFWO903 stopper operates with a simple push/pull mechanism:
- Uzavření odtoku: Push down on the stopper cap until it clicks or seats firmly, sealing the drain opening to retain water in the tub.
- Otevření odtoku: Pull up on the stopper cap until it releases from its sealed position, allowing water to drain freely from the tub.
7. Péče a údržba
To maintain the appearance and functionality of your PROFLO PFWO903 stopper:
- Čištění: Clean regularly with a soft cloth and mild, non-abrasive soap. Rinse thoroughly with water and dry immediately.
- Vyhněte se agresivním chemikáliím: Nepoužívejte abrazivní čisticí prostředky, drátěnky ani chemická rozpouštědla, protože by mohla poškodit chromový povrch.
- Zkontrolujte trosky: Periodically check the drain area for hair or debris that may accumulate around the stopper, which can affect its sealing ability or drainage.
8. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stopper does not seal properly. | Debris under the stopper; worn gasket; improper installation. | Clean under the stopper. Check and replace gasket if worn. Re-check installation for proper seating and sealant. |
| Slow drainage when stopper is open. | Hair or debris accumulation in the drain pipe. | Remove the stopper and clear any obstructions from the drain pipe. Use a drain snake if necessary. |
| Stopper is difficult to push/pull. | Hromadění minerálů nebo nedostatek lubrikace. | Clean the stopper mechanism. A small amount of silicone grease can be applied to moving parts if accessible and appropriate for plumbing. |
9. Specifikace produktu
| Značka | PROFLO |
| Číslo modelu | PFWO903 |
| Materiál | Brass and Zinc |
| Dokončit | Chrome |
| Přibližné rozměry produktu (D x Š x V) | 1 x 1 x 1 palce |
| Hmotnost položky | 3.84 unce |
| UPC | 781889214626 |
10. Informace o záruce
This PROFLO product is covered by a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty documentation included with your purchase or contact PROFLO customer support directly. Proof of purchase may be required for warranty claims.
11. Zákaznická podpora
For further assistance, technical support, or to inquire about replacement parts, please contact PROFLO customer service. You can find additional resources and contact information by visiting the official PROFLO store on Amazon:
