Návod k obsluze nástěnných hodin Karlsson

1. Důležité bezpečnostní informace

Před montáží a použitím si pečlivě přečtěte všechny pokyny. Uschovejte si tento návod pro budoucí použití.

• Bezpečnost baterie: Use only the specified battery type (1 AA battery). Do not mix old and new batteries, or different types of batteries. Insert batteries with correct polarity (+ and -). Remove exhausted batteries promptly.
• Montáž: Ensure the wall surface is suitable and strong enough to support the clock. Use appropriate mounting hardware (not included) for your wall type. Improper mounting can lead to the clock falling and causing injury or damage.
• Umístění: Avoid placing the clock in direct sunlight or near heat sources, as this may affect its accuracy or material integrity. Keep out of reach of small children and pets.
• Zacházení: The clock hands can be delicate. Handle them with care during assembly and time setting to prevent bending or damage.

2. Obsah balení

Před zahájením montáže ověřte, zda jsou všechny komponenty přítomny:

• 1x Karlsson Wall Clock Mechanism with Hands
• 12x Multicolored Decorative Blocks
• 1x Assembly Template (if included, otherwise use measurements)
• 1x Návod k obsluze (tento dokument)

Figure 2.1: Main components of the Karlsson Wall Clock.

3. Nastavení a montáž

The Karlsson Wall Clock requires assembly. Follow these steps for proper installation:

1. Připravte zeď: Vyberte vhodné místo na zdi. Ujistěte se, že povrch je čistý a suchý.
2. Nainstalujte baterii: Open the battery compartment on the back of the clock mechanism. Insert 1 AA battery (not included), ensuring correct polarity.
3. Mount the Clock Mechanism:
   • Determine the desired height for the center of your clock.
   • Securely mount the clock mechanism to the wall using appropriate wall anchors and screws (not included). Ensure it is level and stable.
   

   Figure 3.1: Close-up of the clock mechanism.

4. Position the Decorative Blocks:
   • The clock is designed to allow you to "make the clock as big as you want" by adjusting the spacing of the blocks.
   • Use the provided template (if applicable) or measure equal distances from the center mechanism to place the 12 multicolored blocks. The blocks represent the hour markers.
   • Adhere the blocks to the wall using suitable adhesive or mounting strips (not included). Ensure they are evenly spaced and aligned to form a clear clock face.
   

   Obrázek 3.2: Přample of assembled clock with customizable block placement.

4. Návod k obsluze

Once assembled, operating your Karlsson Wall Clock is straightforward:

1. Nastavení času:
   • Locate the time-setting knob or wheel on the back of the clock mechanism.
   • Gently turn the knob/wheel clockwise until the hour and minute hands display the correct time. Avoid moving the hands directly, as this can damage the movement.
2. Tichý provoz: This clock features a silent movement, ensuring no ticking sounds for a peaceful environment.

5. Údržba

To ensure the longevity and appearance of your Karlsson Wall Clock:

• Čištění: Wipe the clock mechanism and decorative blocks with a soft, dry cloth. For stubborn marks, a slightly damp Lze použít hadřík a ihned osušit. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Výměna baterie: Replace the AA battery annually, or when the clock begins to lose time or stops functioning. Always dispose of used batteries responsibly.
• Hand Care: The clock hands are delicate. Avoid touching or bending them unnecessarily.

6. Řešení problémů

If you encounter issues with your Karlsson Wall Clock, refer to the following common problems and solutions:

7. Specifikace

8. Záruka a podpora

For warranty information, technical support, or replacement parts, please refer to the official Karlsson webwebu nebo se obraťte přímo na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.

You can visit the Karlsson Store on Amazon for more information: Karlsson Store