Zavedení
Thank you for choosing the DAKASON 30W LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting with features such as a dusk-to-dawn photocell and an adjustable head. This manual provides essential information for safe installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and keep it for future reference.
Image: DAKASON 30W LED Wall Pack with adjustable head installed on a building exterior, illuminating the area below.
Bezpečnostní informace
Během instalace a provozu dodržujte následující bezpečnostní opatření:
- VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení pojistkou nebo jističem.
- Instalaci musí provést kvalifikovaný elektrikář v souladu se všemi místními elektrotechnickými předpisy a vyhláškami.
- Zajistěte přívod objtage is compatible with the fixture's requirements (100-277V AC).
- Nemanipulujte s přístrojem mokrýma rukama ani nestojte na mokrém či suchém povrchu.amp povrchy.
- This fixture is designed for outdoor use and is IP65 rated for wet locations.
- Nepokoušejte se o úpravy ani demontáž svítidla nad rámec popisu v tomto návodu.
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- DAKASON 30W LED Wall Pack Fixture (x2 for 2-pack)
- Photocell (pre-installed)
- Non-photocell cover (for disabling photocell function)
- Mounting hardware (screws, wire nuts)
- Návod k použití
Vlastnosti produktu
- Energeticky účinný: Consumes 30 watts, replacing 100-150 watt metal halide lights, saving up to 80% energy.
- Built-in Photocell: Automatically turns the light on at dusk and off at dawn. Can be converted to non-photocell operation.
- Nastavitelná hlava: Fixture angle can be adjusted 0-90 degrees for precise light direction.
- Odolná konstrukce: Made of die-cast aluminum housing and tempered glass lens, IP65-rated waterproof and vibration resistant.
- Dlouhá životnost: Maintenance-free LEDs with 50,000 hours of life.
Nastavení a instalace
Follow these steps for proper installation of your DAKASON LED Wall Pack. Ensure power is disconnected before starting.
1. Montáž svítidla
- Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight.
- Securely attach the mounting plate to the junction box or wall using appropriate screws and anchors (not included, if required for your surface).
- Ensure the mounting plate is oriented correctly, typically with 'UP' arrow pointing upwards, to allow proper hinge function.
Image: Diagram illustrating the junction box mounting process, showing the fixture opened to reveal wiring and the separate mounting plate.
2. Připojení vodičů
- Připojte černý vodič svítidla k fázovému/fázovému vodiči napájení.
- Připojte bílý vodič svítidla k neutrálnímu vodiči napájení.
- Connect the fixture's green/ground wire to the supply's ground wire.
- Use appropriate wire nuts to secure all connections. Ensure connections are tight and insulated.
- Opatrně zasuňte všechny vodiče do spojovací krabice.
3. Securing the Fixture
- Attach the fixture body to the mounted plate, ensuring it is securely hinged.
- Close the fixture and tighten any securing screws to ensure a watertight seal.
Image: DAKASON LED Wall Pack installed on a building during heavy rain, demonstrating its IP65 waterproof rating for wet locations.
4. Photocell Configuration (Optional)
The fixture comes with a pre-installed photocell for dusk-to-dawn operation. If you prefer to control the light with a wall switch, you can replace the photocell with the included non-photocell cover.
- To disable the photocell, carefully disassemble the housing of the lamp to access the photocell.
- Pull out the existing photocell.
- Screw in the non-photocell cover into the opening.
- Znovu sestavte lamp bydlení.
Image: Diagram illustrating the steps to convert the LED wall pack from photocell to non-photocell operation by replacing the sensor with a cover.
Návod k obsluze
Provoz fotobuňky
If the photocell is installed, the fixture will automatically turn on when ambient light levels drop (dusk) and turn off when light levels rise (dawn). Ensure the photocell is not obstructed by objects or other light sources, which could interfere with its operation.
Image: Close-up of the photocell sensor on the DAKASON LED Wall Pack, illustrating its function to automatically turn on at dusk and off at dawn.
Nastavení světelné hlavy
The fixture's head can be adjusted to direct light as needed. Loosen the adjustment screw on the side of the fixture, pivot the light head to the desired angle (0-90 degrees), and then securely tighten the screw to lock it in place.
Image: Diagram illustrating the 0-90 degree adjustable head feature of the LED wall pack, showing the range of motion.
Údržba
The DAKASON LED Wall Pack is designed for minimal maintenance. However, periodic cleaning can help maintain optimal performance.
- Čištění: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo čočku.
- Inspekce: Periodically check the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- The LEDs are integrated and not user-replaceable.
Odstraňování problémů
If you encounter issues with your LED Wall Pack, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí | Žádné napájení Vadné zapojení Photocell malfunction (if installed) | Zkontrolujte jistič a napájecí připojení. Ověřte, zda jsou kabeláž bezpečně připojena. Ensure photocell is not obstructed or try replacing it with the non-photocell cover to test. |
| Světlo zůstává svítit během dne | Photocell obstructed or receiving insufficient light Porucha fotobuňky | Clear any obstructions from the photocell. Ensure it is exposed to natural daylight. Test with the non-photocell cover. |
| Světlo bliká | Uvolněné připojení kabeláže svtage výkyvy | Zkontrolujte a zajistěte všechna připojení kabelů. Consult a qualified electrician to check power supply stability. |
Specifikace
Image: Dimensions diagram for the DAKASON 30W LED Wall Pack, showing length, width, and height measurements.
| Atribut | Hodnota |
|---|---|
| Značka | DAKASON |
| Číslo modelu | WP-30D-50 |
| Wattage | 30 wattů |
| Jas | 3300 XNUMX lumenů |
| Teplota barev | 5000 Kelvinů (studená bílá) |
| svtage | 100–277 voltů (AC) |
| Materiál | Die-cast Aluminum, Tempered Glass |
| Rozměry (D x Š x V) | 6.6 cm x 7.9 cm x 4.3 cm |
| Hmotnost položky | 4 libry |
| Hodnocení IP | IP65 (vodotěsný) |
| Speciální funkce | Dusk-to-Dawn Photocell, Adjustable Head, Full Cut-Off, Instant On, Not Dimmable, Shatter Resistant |
| Certifikace | Seznam ETL |
| UPC | 766832159971 |
Informace o záruce
This DAKASON LED Wall Pack comes with a 5-letá záruka. The warranty is provided by the seller. Please retain your proof of purchase for any warranty claims.
Zákaznická podpora
For any questions, concerns, or issues regarding your DAKASON LED Wall Pack, please contact us through the Amazon Buyer-Seller Messaging Service. Our support team is available to assist you.
