1. Úvod
This manual provides essential information for the safe and proper operation, installation, and maintenance of your Primo Top-Loading Water Dispenser, Model 601142-C. Please read all instructions carefully before use and retain this manual for future reference.
The Primo Top-Loading Water Dispenser provides instant access to both ice-cold and piping-hot water, suitable for various beverages and instant meals. It is designed for use with 3 or 5-gallon water bottles and features a child-resistant safety mechanism for hot water dispensing.
2. Bezpečnostní informace
WARNING: To reduce the risk of injury and property damage, the user must read this entire guide before assembling, installing, and operating the dispenser.
- Dávkovač vždy umístěte na rovný a stabilní povrch.
- Ujistěte se, že je dávkovač zapojen do uzemněné elektrické zásuvky.
- Uchovávejte dávkovač mimo dosah přímého slunečního záření a zdrojů tepla.
- Nepoužívejte dávkovač s poškozeným kabelem nebo zástrčkou.
- The hot water faucet is equipped with a child safety lock. Always engage this lock when not actively dispensing hot water, especially in households with children.
- Neponořujte dávkovač, kabel ani zástrčku do vody ani jiných kapalin.
- Před čištěním nebo prováděním jakékoli údržby odpojte dávkovač ze zásuvky.
- Tento spotřebič není určen k tomu, aby ho používaly osoby (včetně dětí) se sníženými fyzickými, smyslovými nebo duševními schopnostmi nebo nedostatkem zkušeností a znalostí, pokud na ně nebude dohlíženo nebo na ně nebude dohlížet osoba odpovědná za jejich bezpečnost nebo je poučit o používání spotřebiče. .
3. Nastavení
Your Primo water dispenser is designed for easy setup without the need for plumbing.
- Unpack the Dispenser: Opatrně odstraňte veškerý obalový materiál.
- Position the Dispenser: Place the dispenser on a flat, stable surface. Ensure there is adequate space around the unit for ventilation.
- Instalace odkapávací misky: Insert the removable drip tray into its designated slot at the base of the dispensing area.
- Install Anti-Tipping Bracket (Optional): If desired, install the anti-tipping bracket to enhance stability. Refer to the separate bracket installation guide for detailed instructions.
- Naplňte láhev s vodou: Remove the cap from a 3 or 5-gallon Primo water bottle. Carefully lift and invert the bottle, placing it securely onto the top loading reservoir of the dispenser. Ensure the bottle is seated properly to prevent leaks.
- Připojit: Zapojte dávkovač do uzemněné elektrické zásuvky 120 V AC.
- Počáteční průtok vody: Before turning on heating or cooling, dispense water from both the hot and cold faucets until water flows smoothly. This primes the system and removes any air.
Image: Visual guide illustrating the simple setup process for the Primo water dispenser, including placing the drip tray, installing the anti-tipping bracket, and loading a water bottle.
4. Provoz
Your Primo water dispenser offers two temperature settings for your convenience.
4.1 Dávkování studené vody
- Place a glass or container under the cold water faucet (typically indicated by a blue lever or button).
- Stiskněte páčku/tlačítko studené vody pro výdej chlazené vody.
- Release the lever/button to stop the water flow.
Image: A person dispensing cold water into a glass from the Primo water dispenser. The blue indicator for cold water is visible.
4.2 Výdej horké vody
CAUTION: Hot water can cause burns. Always use the child safety lock.
- Place a heat-resistant cup or container under the hot water faucet (typically indicated by a red lever or button).
- To dispense hot water, first push the child safety lock button (usually located above the hot water lever).
- While holding the safety lock, press the hot water lever/button to dispense hot water.
- Release the lever/button to stop the water flow. The child safety lock will automatically re-engage.
Image: A person pressing the child safety lock and then dispensing hot water into a mug from the Primo water dispenser. The red indicator for hot water is visible.
5. Údržba
Regular cleaning and maintenance will ensure the longevity and optimal performance of your water dispenser.
5.1 Čištění odkapávací misky
The drip tray is removable and dishwasher-safe for easy cleaning. Empty and clean the drip tray regularly to prevent overflow and bacterial growth.
- Carefully slide out the drip tray from the dispenser.
- Vylijte veškerou nahromaděnou vodu.
- Wash the drip tray with mild soap and warm water, or place it in the dishwasher.
- Rinse thoroughly and dry before reinserting into the dispenser.
5.2 Čištění exteriéru
Otřete vnější povrchy dávkovače měkkým,amp hadříkem. Na odolné skvrny použijte jemný, neabrazivní čisticí prostředek. Nepoužívejte agresivní chemikálie nebo abrazivní houbičky, které by mohly poškodit povrchovou úpravu.
5.3 Vnitřní čištění (dezinfekce)
For optimal water quality, it is recommended to sanitize the internal water reservoirs and lines periodically. Refer to the manufacturer's website or contact customer support for detailed sanitization instructions specific to your model.
6. Řešení problémů
If you experience issues with your Primo water dispenser, consult the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| No water dispenses | Empty water bottle; Air lock; Dispenser unplugged | Replace water bottle; Dispense water from both faucets to release air; Ensure dispenser is plugged in. |
| Voda není dostatečně studená/horká | Dispenser recently plugged in; Heating/cooling switch off; Poor ventilation | Allow 1-2 hours for water to reach desired temperature; Ensure heating/cooling switches (if present) are on; Ensure adequate space around dispenser for air circulation. |
| Voda vytéká | Improperly seated water bottle; Cracked water bottle; Full drip tray | Re-seat water bottle; Inspect bottle for cracks and replace if necessary; Empty drip tray. |
| Neobvyklý hluk | Compressor cycling; Dispenser not level | Normal operation may include compressor noise; Ensure dispenser is on a level surface. |
If the problem persists after attempting these solutions, please contact Primo customer support.
7. Specifikace
Detailed technical specifications for the Primo Top-Loading Water Dispenser Model 601142-C:
- Číslo modelu: 601142-C
- Barva: Černá a nerezová ocel
- Materiál: Sklo, nerezová ocel
- Kapacita: Designed for 3 or 5 Gallon water bottles
- Rozměry produktu: 10.8"H x 11.8"Š x 36.5"V
- Styl: Horní zatížení
- Hmotnost: 27.1 Pounds (Item Weight: 36.1 pounds)
- Wattage: 420 wattů
- Typ instalace: Countertop (Floor-standing)
- Místo přístupu: Nahoru
- Počet nastavení: 2 (Teplo, Studeno)
- Upper Temperature Rating (Hot): 197.6 stupňů Fahrenheita
- Lower Temperature Rating (Cold): 39.2 stupňů Fahrenheita
- Zdroj napájení: AC
- UPC: 817206011422
- Výrobce: Primo Water Corporation
8. Záruka a podpora
For warranty information, please refer to the documentation included with your product at the time of purchase or visit the official Primo Water Corporation website. Primo Water Corporation is the manufacturer of this product.
For customer support, technical assistance, or to inquire about replacement parts, please contact Primo Water Corporation directly through their official channels.
