Zavedení
This manual provides essential information for the installation, operation, and maintenance of your MAC Engine Cooling Water Pump, model BR3Z8501N. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Konec produktuview
The MAC Engine Cooling Water Pump (BR3Z8501N) is a direct replacement component designed to circulate coolant through your vehicle's engine, maintaining optimal operating temperature. This OE-style pump is manufactured to meet specific fit, form, and function requirements for compatible Ford and Lincoln models.
Image: Main components of the MAC Engine Cooling Water Pump, including the pump assembly, gasket, and pulley.
Klíčové vlastnosti:
- Přímá náhrada pro bezproblémovou instalaci.
- Manufactured by ISO certified factories.
- Designed to meet OE specifications for fit, form, and function.
Kompatibilita
This water pump is compatible with the following vehicle models and engine types:
- 2015-2017 Ford Expedition 3.5L
- 2011-2017 Ford F150 3.5L, 3.7L
- 2015-2019 Ford Transit 150, 250, 350, 350HD 3.5L, 3.7L
- 2015-2017 Lincoln Navigator 3.5L
- 2016-2017 Ford Mustang 3.7L
- 2015-2018 Ford Lobo 3.5L
- 2015-2017 MV-1 3.7L
Note: Fits both Turbo and Non-Turbo engine configurations.
Nastavení a instalace
Installation of an engine water pump requires mechanical expertise and specialized tools. If you are not confident in your ability to perform this installation, it is recommended to seek professional assistance.
Požadované nástroje a materiály:
- Sada nástrčných klíčů a klíčů
- Momentový klíč
- Vypouštěcí vana chladicí kapaliny
- Nová chladicí kapalina motoru (kompatibilní s vaším vozidlem)
- Gasket scraper (if needed)
- Ochranné brýle a rukavice
Obecné kroky instalace (podrobnosti naleznete v servisní příručce vozidla):
- Ensure the engine is cool and disconnect the battery.
- Drain the engine coolant into a suitable container.
- Remove any components obstructing access to the water pump (e.g., serpentine belt, air intake, shields).
- Carefully unbolt and remove the old water pump. Note the orientation of the pulley and any associated components.
- Clean the mounting surface thoroughly, removing all old gasket material.
- Install the new water pump with the provided gasket, ensuring proper alignment.
- Tighten bolts to the manufacturer's specified torque settings (refer to your vehicle's service manual).
- Znovu nainstalujte všechny odstraněné součásti.
- Refill the cooling system with the correct type and amount of coolant.
- Bleed the cooling system to remove any air pockets.
- Reconnect the battery and test for leaks.
Video: AULINK provides a visual overview of the 125-3285 Water Pump for Ford F150 (2011-2020), showcasing the product from various angles. This video is for product identification and general reference; always consult your vehicle's specific service manual for detailed installation procedures.
Video: VIPCAR Autoparts provides an insight into their manufacturing process, including factory operations, robotics, research and development, and quality control. This video offers a general look at the production standards for automotive parts.
Provozní úvahy
Once installed, the water pump operates continuously with the engine to circulate coolant. Monitor your vehicle's temperature gauge regularly. Any unusual fluctuations in engine temperature, especially overheating, should be addressed immediately.
Initial Break-in Period:
During the initial break-in period (approximately the first 15-30 minutes of operation), it is not uncommon for a new water pump to exhibit minor weeping from the weep hole. This is typically a normal part of the seal seating process. If weeping persists beyond this period, or if significant leakage occurs, consult the troubleshooting section or a qualified mechanic.
Údržba
Proper maintenance of your cooling system is crucial for the longevity of your water pump and engine.
- Kontroly chladicí kapaliny: Regularly check coolant levels and condition. Replace coolant according to your vehicle manufacturer's recommendations.
- Kontrola pásu: Inspect the serpentine belt for wear, cracks, or proper tension. A worn or loose belt can affect water pump performance.
- Detekce úniku: Periodically inspect the water pump and surrounding areas for any signs of coolant leaks.
Odstraňování problémů
If you experience issues with your water pump or cooling system, consider the following:
- Přehřívání: Check coolant level, thermostat function, radiator for blockages, and ensure proper air bleeding.
- Úniky chladicí kapaliny: Inspect all hose connections, the water pump housing, and the weep hole. Persistent leaks from the weep hole after the break-in period may indicate a seal failure.
- Hluk: Squealing or rattling noises from the water pump area could indicate a failing bearing. Check belt tension and other pulleys in the system.
For complex issues, consult a certified automotive technician.
Specifikace
| Funkce | Detail |
|---|---|
| Značka | MAC |
| Číslo modelu | BR3Z8501N |
| Číslo dílu OEM | BR3Z8501N |
| Číslo dílu výrobce | 155982 |
| Typ služby vozidla | Náklaďák |
| Materiál | Cast iron, aluminum alloys, or high-performance thermoplastics |
Informace o záruce
The warranty for this item is stated on the product listing. For specific details regarding warranty coverage, duration, and claims process, please refer to the original product listing or contact MAC customer support directly.
Image: A graphic indicating that warranty information is available on the product listing and encourages contacting customer support for questions.
Zákaznická podpora
For further assistance, technical support, or inquiries regarding your MAC Engine Cooling Water Pump, please contact MAC customer service through the details provided on your purchase receipt or the official MAC Auto Parts store on Amazon.
Navštivte MAC Store pro více produktů a informací.
