Renogy RNG-50DB-H

Renogy Flexibilní solární panel 50W 12V monokrystalický návod k obsluze

Model: RNG-50DB-H

1. Konec produktuview

The Renogy 50 Watt 12 Volt Monocrystalline Flexible Solar Panel is designed for versatile off-grid power solutions. Unlike traditional rigid panels, its ultra-flexible and lightweight design allows for installation on curved surfaces, making it ideal for marine, RV, cabin, van, car, and boat applications. This panel provides efficient solar charging for your 12V systems.

Renogy 50W Flexible Solar Panel installed on various curved surfaces like RVs, boats, and teardrop trailers.
Obrázek 1: The Renogy 50W Flexible Solar Panel is suitable for a variety of applications including RVs, boats, camping setups, and trailers, demonstrating its adaptability to curved surfaces.

2. Klíčové vlastnosti

  • Extrémně flexibilní: Capable of flexing up to 248 degrees, allowing installation on a wide range of curved surfaces where standard panels are impractical.
  • Ultra lehký: Weighs only 2.87 pounds (approximately 1.3 kg), making transportation and installation significantly easier compared to conventional solar panels.
  • Super Thin Lamination: With a thickness of only 0.16 inches (4mm), it is approximately 95% thinner than rigid counterparts, enabling a discreet solar setup.
  • Vysoce odolný: Rigorously tested to withstand extreme wind loads of up to 2400 Pa and snow loads of up to 5400 Pa, ensuring long-term reliability.
  • Vysoká účinnost: Features monocrystalline cells with 22% efficiency for optimal power generation.
Renogy 50W Flexible Solar Panel bending to demonstrate its flexibility, with images of RV, Boat, Camping, and Trailer applications.
Obrázek 2: The Renogy Flexible Solar Panel showcases its extreme flexibility, making it perfect for curved surfaces on RVs, boats, and other mobile applications without cracking.
Diagram illustrating the transparent dots and matrix distributed dots on the solar panel surface for enhanced sunlight capture and energy conversion efficiency.
Obrázek 3: This image highlights the panel's excellent sunlight capture and energy conversion efficiency through transparent dots that gather sunlight from different angles and matrix distributed dots that cause refraction for increased conversion rates.
Close-up of the Renogy Flexible Solar Panel showing solar panel connectors, an IP68 rated waterproof junction box, and four metal reinforced mounting holes.
Obrázek 4: Detailní view of the panel's quality features, including robust solar panel connectors with cables, an IP68 rated waterproof junction box, and four metal-reinforced mounting holes for secure installation.

3. Nastavení a instalace

Proper installation is crucial for optimal performance and longevity of your Renogy Flexible Solar Panel. Follow these guidelines for secure and efficient setup.

3.1 Rozbalení a kontrola

  1. Carefully remove the solar panel from its packaging.
  2. Inspect the panel for any signs of physical damage during transit.
  3. Ensure all components, including connectors and cables, are intact.

3.2 Montážní doporučení

For detailed installation methods, it is recommended to consult a local contractor for guidance, especially for mobile applications. Modules must be mounted using silicone structural adhesive on the backside of the panel. Grommets are primarily for non-mobile applications.

3.3 Wiring Configurations

The Renogy Flexible Solar Panel can be wired in series or parallel depending on your system's voltage and current requirements. Always ensure correct polarity (+ to + and - to -) when making connections.

Diagrams showing how to connect solar panels in parallel and in series to a charge controller, battery, and optional power inverter.
Obrázek 5: This diagram illustrates the correct methods for connecting multiple solar panels in parallel or series configurations to a charge controller, battery, and an optional power inverter.

3.4 Instalační videoprůvodce

For a visual guide on installing flexible solar panels, refer to the official Renogy installation video:

1 video: This video provides a comprehensive installation guide for Renogy Flexible Solar Panels, demonstrating the steps for secure mounting and wiring.

4. Návod k obsluze

Once installed, your Renogy Flexible Solar Panel will begin converting sunlight into electricity. To maximize performance:

  • Ensure the panel is exposed to direct sunlight for the majority of the day.
  • Avoid shading from trees, buildings, or other obstructions, as even partial shading can significantly reduce output.
  • Connect the panel to a compatible charge controller and battery bank for efficient power storage and usage.

5. Údržba

Regular maintenance ensures the longevity and optimal performance of your solar panel.

  • Čištění: Periodically clean the panel surface with a soft cloth and mild, non-abrasive cleaner to remove dirt, dust, and debris. Ensure the panel is cool before cleaning.
  • Inspekce: Regularly check for any physical damage, loose connections, or corrosion on the wiring and connectors.
  • Stínování: Monitor the installation area for new sources of shading (e.g., growing trees) and address them to maintain full sun exposure.

6. Řešení problémů

If your solar panel is not performing as expected, consider the following:

  • Nízký výstupní výkon: Check for shading on the panel surface. Verify all connections are secure and free from corrosion. Ensure the charge controller settings are appropriate for your battery type.
  • Žádný výkon: Confirm that the panel is receiving direct sunlight. Check all wiring for disconnections or damage. Test the open-circuit voltage (Voc) of the panel to ensure it is generating power.
  • Baterie se nenabíjí: Verify the charge controller is functioning correctly. Check battery health and connections.

For further assistance, refer to the product's official support channels.

7. Specifikace

AtributHodnota
ZnačkaRenogy
Číslo modeluRNG-50DB-H
Maximální výkon50 wattů
MateriálGlass (Monocrystalline)
Rozměry produktu28.03 cm D x 18.11 cm Š x 0.16 cm V
Hmotnost položky2.98 libry
Účinnost22 %
Proud AC adaptéru2.75 Amps
Maximální objemtage1000 V (DC)
Zahrnuté komponentySolární panel
BarvaČerná/Bílá
StylFlexibilní
Zdroj napájeníSolární napájení
Diagram showing the dimensions of the Renogy 50W Flexible Solar Panel: 26.8 inches (683 mm) length, 20.39 inches (518 mm) width, and highlighting its ultra-lightweight (1.3 kg) and ultra-thin (4mm) design.
Obrázek 6: This image provides key dimensions of the Renogy 50W Flexible Solar Panel, emphasizing its compact size, ultra-lightweight nature (1.3 kg), and ultra-thin profile (4mm), making it easy to handle and install.

8. Durability and Testing

The Renogy Flexible Solar Panel undergoes rigorous testing to ensure its durability and performance in various conditions.

8.1 Solar Panel Stress Testing

2 video: This video demonstrates various stress tests performed on solar panels, including bending, treading, smashing, and lifting, to showcase their durability and power retention under extreme conditions.

8.2 Konec produktuview Video

3 video: A brief product overview highlighting the features and benefits of the flexible solar panel, including its lightweight and durable design, and ease of installation on various surfaces.

9. Záruka a podpora

The Renogy Flexible Solar Panel comes with a 5-letá záruka. For any questions, technical support, or warranty claims, please contact Renogy customer service directly.

Související dokumenty - RNG-50DB-H

Předview Návod k instalaci a údržbě solárních panelů Renogy
Komplexní průvodce od společnosti Renogy s podrobným popisem instalace, mechanické montáže, elektrického připojení, uzemnění, provozu a údržby solárních panelů Renogy. Zahrnuje bezpečnostní opatření, technické specifikace a informace o kompatibilitě produktů.
Předview Renogy Solar Panel Installation and Maintenance Guide
Comprehensive guide from Renogy covering solar panel installation, mechanical and electrical setup, grounding, and maintenance procedures for optimal performance and safety.
Předview Návod k instalaci solárních panelů Renogy: FV moduly a rohové konzole
Komplexní instalační průvodce pro fotovoltaické (FV) moduly Renogy a rohový držák Renogy MTS-CB. Zahrnuje bezpečnost, montáž, elektroinstalaci a údržbu pro aplikace nezávislé na síti a pro obytné vozy.
Předview Uživatelská příručka k solární sadě Renogy pro použití mimo síť: Průvodce instalací, zapojením a montáží
Komplexní uživatelská příručka pro solární sady Renogy pro použití v zahraničí, která zahrnuje instalaci, zapojení, montážní systémy (Z-držák, lišta, sloup), konfigurace baterií, bezpečnostní opatření a použití pojistek ANL pro obytné vozy, lodě a nezávislé napájecí systémy.
Předview Uživatelská příručka k měniči Renogy Pure Sinusoid
Uživatelská příručka pro 12V měniče Renogy s čistou sinusoidou (700 W, 1000 W, 2000 W, 3000 W). Zahrnuje bezpečnost, instalaci, provoz, řešení problémů, rozměry a specifikace.
Předview Návod k instalaci montážního systému Renogy MTS-ZB ve tvaru Z
Comprehensive installation guide for the Renogy MTS-ZB Z-Bracket Mounting System, detailing safety precautions, parts identification, step-by-step installation for various surfaces including RV roofs, Z-Bracket dimensions, and compatibility information for Renogy solar modules.