Zavedení
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Primo Easy Top Loading Water Dispenser with Pet Station. Please read this manual thoroughly before using the appliance and retain it for future reference.
The Primo Easy Top Loading Water Dispenser offers convenient access to ice-cold, piping hot, and room temperature water, along with an integrated pet station for your animal companions.
Image: The Primo Top Loading Water Dispenser with Pet Station, showcasinjeho design a funkčnost.
Bezpečnostní informace
Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.
- Ujistěte se, že je dávkovač umístěn na rovném a stabilním povrchu.
- Nepoužívejte dávkovač s poškozeným kabelem nebo zástrčkou.
- Uchovávejte dávkovač mimo dosah přímého slunečního záření a zdrojů tepla.
- Před čištěním nebo prováděním jakékoli údržby odpojte dávkovač ze zásuvky.
- The hot water function includes a child-resistant safety feature. Always supervise children near the dispenser.
- Neponořujte dávkovač do vody ani jiných kapalin.
Nastavení
- Rozbalení: Opatrně vyjměte dávkovač z obalu. Zkontrolujte, zda není poškozen.
- Umístění: Position the dispenser on a flat, sturdy surface. Ensure there is adequate clearance (at least 4 inches) from walls to allow for proper ventilation.
- Pet Bowl Installation: The removable pet bowl can be placed on the front or either side of the dispenser. Ensure it is securely seated. The dispenser will not release water to the pet bowl unless it is correctly in place.
- Instalace láhve na vodu:
- Clean the exterior of a 3 or 5-gallon water bottle.
- Remove the protective seal from the bottle cap. Do not remove the cap itself if it's a spill-proof type.
- Invert the water bottle and place it firmly onto the bottle support collar at the top of the dispenser. The probe will puncture the cap, and water will begin to flow into the dispenser's reservoirs.
- Připojení napájení: Plug the dispenser into a grounded electrical outlet.
- Počáteční základní nátěr: Before turning on the heating or cooling functions, dispense at least 1 liter (approximately 4 cups) of water from both the cold and hot water spouts to ensure the reservoirs are full. This prevents dry heating of the hot tank.
- Aktivace funkcí: Locate the power switches on the back of the unit. Turn on the switches for the hot and cold water functions as desired. Allow approximately 15-30 minutes for the water to reach optimal temperatures.
Image: Key features for setup, including the top-loading design for easy water level viewing, the spill-proof bottle holder with leak guard, and easy push-button controls for dispensing.
Návod k obsluze
Your Primo water dispenser provides three temperature options: cold, hot, and pet water.
- Studená voda: Place a cup under the cold water spout. Press the cold water button to dispense.
- Horká voda: For safety, the hot water spout has a child-resistant safety button. Press and hold the safety button, then press the hot water button to dispense. Exercise caution as water is piping hot.
- Pet Water: Ensure the pet bowl is correctly installed. Press the pet paw button to dispense water directly into the pet bowl. Water will only flow if the bowl is in place.
Image: A hand dispensing cold water into a glass from the dispenser's cold water spout.
Image: A user filling a cooking pot with hot water from the dispenser, demonstrating the hot water function.
Image: A hand pressing the dedicated pet paw button on the dispenser's control panel to activate the pet water feature.
Image: A diagram highlighting the hot and cold water dispensing capabilities of the Primo water dispenser.
Image: A diagram detailing the pet station features, including push-button dispensing into the pet bowl, the removable dishwasher-safe design, and flexible placement options.
Údržba
Regular cleaning and maintenance will ensure the longevity and optimal performance of your water dispenser.
- Vnější čištění: Vnější povrchy otřete měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Odkapávač: The drip tray should be emptied and cleaned regularly to prevent overflow and bacterial growth. It is removable for easy cleaning.
- Pet Bowl: The pet bowl is dishwasher-safe for convenient cleaning. Remove it from the dispenser and wash as needed.
- Dispenser Cleaning (Recommended every 3-6 months):
- Odpojte dávkovač ze zásuvky.
- Vyjměte láhev s vodou.
- Drain all water from the hot and cold tanks using the drain plugs located at the back of the unit (refer to diagram if available).
- Prepare a cleaning solution (e.g., a mixture of water and white vinegar or a commercial dispenser cleaning solution).
- Pour the cleaning solution into the top reservoir.
- Nechte roztok působit 15–20 minut.
- Dispense the cleaning solution through all spouts (hot, cold, and pet) until the tanks are empty.
- Rinse thoroughly by filling the reservoir with clean water and dispensing it through all spouts multiple times until no cleaning solution odor remains.
- Replace drain plugs, install a new water bottle, and plug the dispenser back in.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný výdej vody. | Water bottle empty or not properly seated. Air lock. | Replace water bottle. Re-seat bottle. Dispense water from all spouts to release air. |
| Water not hot/cold. | Hot/cold switch off. Dispenser recently plugged in. | Ensure hot/cold switches on the back are ON. Allow 15-30 minutes for temperature stabilization. |
| Pet bowl not dispensing water. | Pet bowl not correctly installed. | Ensure the pet bowl is fully seated in its designated position. |
| Únik. | Water bottle cracked or improperly seated. Drain plug loose. | Check water bottle for cracks and proper seating. Tighten drain plugs. |
| Neobvyklý hluk. | Compressor cycling (normal). Dispenser not level. | Ensure dispenser is on a level surface. Compressor noise is normal during cooling cycles. |
Specifikace
- Model: 601243
- Značka: Primo
- Barva: Černá a nerezová ocel
- Materiál: Plast, Nerezová ocel
- Kapacita: 5 Gallons (water bottle)
- Typ instalace: Volné stání
- Místo přístupu: Načítání shora
- Počet nastavení: 3 (Hot, Cold, Pet)
- Zdroj napájení: AC
- Rozměry produktu (D x Š x V): 11.8 x 11.8 x 41.1 palce
- Hmotnost položky: 32 libry
- UPC: 817206012436
Image: A visual representation of the dispenser's dimensions, indicating a height of 41.1 inches and a base of 11.8 x 11.8 inches.
Obrázek: Strana view of the Primo water dispenser, highlighting its slim profile and the integrated pet station at the base.
Záruka a podpora
Specific warranty details and direct support contact information are not provided within this manual. For warranty claims, technical assistance, or to inquire about replacement parts, please refer to the official Primo Water webwebu nebo se obraťte přímo na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.
