Globe Electric 69997 Emile Plug-in Exposed Pendant Light Instruction Manual

Konec produktuview

The Globe Electric 69997 Emile Exposed Pendant Light features a teal cloth cord and a brass socket, designed to provide versatile lighting. This plug-in pendant is suitable for various indoor settings and allows for customization with your choice of E26 Medium Base bulbs (sold separately).

Image: The Globe Electric Emile Plug-in Pendant Light, showcasing its teal cloth cord and brass socket. This is the main product image.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1x Emile 1-Light Plug-in Exposed Pendant (Teal Cloth Cord, Brass Socket)
• Mounting Hardware (includes ceiling hook, anchors, and cord stops)
• Návod k použití

Note: E26 Medium Base 60W Bulb is sold separately and is not included in the package.

Image: A diagram illustrating the pendant light's dimensions, including the 15-foot cord length and the location of the in-line on/off rocker switch.

Bezpečnostní informace

• Před instalací nebo servisem vždy odpojte napájení.
• Tento výrobek je určen pouze pro vnitřní použití.
• Use only E26 Medium Base bulbs, maximum 60W.
• Nepřekračujte maximální watttage specifikováno.
• Ensure the cord is not pinched or damaged during installation.
• Chraňte před vodou a vlhkostí.
• If you are unsure about electrical installations, consult a qualified electrician.

Nastavení a instalace

The Emile pendant light is designed for easy installation and can be used on both sloped and vaulted ceilings. All necessary mounting hardware is included.

1. Připravte oblast: Choose your desired location. Ensure there is a power outlet within reach of the 15-foot cord.
2. Instalace stropních háčků: Use the provided ceiling hooks and anchors to secure the cord in your desired pattern. Drill pilot holes if necessary, then insert anchors and screw in hooks.
3. Drape the Cord: Route the 15-foot teal cloth cord through the installed hooks to achieve your preferred hanging style and height for the pendant.
4. Vložte žárovku: Screw an E26 Medium Base 60W bulb (sold separately) into the brass socket.
5. Připojit: Plug the pendant's cord into a standard electrical outlet.
6. Test: Use the in-line on/off rocker switch to turn the light on and off.

Obrázek: Bývalý/áample of the pendant light installed in a bedroom, with the cord draped creatively across the wall and ceiling, plugged into an outlet near the floor.

Image: The pendant light hanging vertically, showcasing its length and the exposed bulb, positioned next to a wooden side table and a white woven chair.

Návod k obsluze

To operate the Emile Plug-in Exposed Pendant Light:

• Ensure the pendant is properly installed and plugged into a functional electrical outlet.
• Locate the in-line on/off rocker switch on the cord.
• Press the switch to the 'ON' position to illuminate the bulb.
• Press the switch to the 'OFF' position to turn off the light.

For enhanced control, consider using a smart socket (sold separately) if the in-line switch is difficult to access due to placement behind furniture or other objects.

Údržba

• Čištění: Disconnect power before cleaning. Wipe the brass socket and cord with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Výměna žárovky: Ensure the light is off and cool before replacing the bulb. Unscrew the old E26 Medium Base bulb and screw in a new one (maximum 60W).
• Kontrola kabelu: Periodically inspect the cord for any signs of wear, fraying, or damage. If damage is found, discontinue use and replace the product.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information or technical support, please refer to the official Globe Electric webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

Note: Specific warranty details may vary. Please consult the manufacturer's official documentation for the most accurate and up-to-date information.