Roman 50L USB Warm White LED String Lights
with 10 Functions and 8/16 Hour Timer

Zavedení

Welcome to your Roman 50L USB Warm White LED String Lights. This manual provides essential information for the safe operation, setup, and maintenance of your new lighting product. Please read these instructions thoroughly before use and retain them for future reference.

This image displays the front of the product packaging for the Roman 50L USB Warm White LED string lights, highlighting the 'Universal USB LED Lighting' feature and '10 Function and Timer' capabilities.

Důležité bezpečnostní informace

• Přečtěte si všechny pokyny: Before installation and use, carefully read and understand all instructions.
• Zdroj napájení: Use only with a standard USB 5V power adapter (not included). Do not exceed the specified voltage.
• Vnitřní/venkovní použití: These lights are designed for both indoor and outdoor use. When used outdoors, ensure the USB connection point and power adapter are protected from direct exposure to water and moisture.
• Vyhněte se poškození: Do not twist, bend, or pull the cord excessively. Avoid placing the lights in areas where they may be stepped on or damaged.
• Žádné díly opravitelné uživatelem: Do not attempt to open or repair the lights or control unit. Refer all servicing to qualified personnel.
• Teplota: Do not operate in extreme temperatures outside of typical household or outdoor decorative ranges.
• Děti a domácí mazlíčci: Uchovávejte mimo dosah malých dětí a domácích zvířat, aby nedošlo k zamotání nebo spolknutí malých částí.

Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• 50L USB Warm White LED String Lights (Green Cord)
• Dálkové ovládání

Pokyny pro nastavení

1. Připojení napájení

Connect the USB plug of the string lights to any standard USB 5V power adapter (not included). Ensure the adapter is plugged into a functional power outlet.

2. Umístění

Uncoil the string lights carefully. These lights are suitable for both indoor and outdoor use. Position the lights as desired. If used outdoors, ensure the USB connection point and the power adapter are protected from direct moisture and harsh weather conditions.

This image shows the inline control box with 'TIMER', 'OFF', 'FUNCTION', and 'ON' buttons, along with the attached USB connector for power input.

Tento obrázek poskytuje detailní view of several individual warm white LED bulbs integrated into the green power cord.

Návod k obsluze

Your Roman LED string lights can be operated using the inline controller on the cord or the included remote control.

Zapnutí/vypnutí

• Zhasnout světla ON, press the 'ON' button on the inline controller or the remote control.
• Zhasnout světla VYPNUTO, press the 'OFF' button on the inline controller or the remote control.

Volba funkce

The lights feature 10 different lighting functions (modes).

• Press the 'FUNCTION' button on the inline controller or the remote control to cycle through the 10 available lighting modes. Each press will advance to the next mode.

Timer Function (8/16 Hours)

The built-in timer allows for automatic operation.

• To activate the timer, press the 'TIMER' button on the inline controller or the remote control.
• Once activated, the lights will remain ON for 8 hours, then automatically turn OFF for 16 hours. This 24-hour cycle will repeat daily until the timer is deactivated.
• To deactivate the timer, press the 'TIMER' button again. The lights will then remain on continuously until manually turned off.

Péče a údržba

• Čištění: To clean the lights, gently wipe them with a soft, dry cloth. Do not use abrasive cleaners or solvents. Do not immerse the lights, control unit, or USB connector in water.
• Skladování: When not in use, carefully coil the string lights and store them in a cool, dry place, away from direct sunlight and extreme temperatures.
• Inspekce: Periodically inspect the cord and bulbs for any signs of damage. If damage is found, discontinue use immediately.

Odstraňování problémů

• Světla se nerozsvítí:
  • Ensure the USB power adapter is securely connected and functioning correctly.
  • Ověřte, zda je elektrická zásuvka aktivní.
  • Check if the 'ON' button has been pressed.
• Lights flicker or turn off unexpectedly:
  • Ensure the USB power source is stable and providing consistent 5V power.
  • If the timer function is active, the lights will turn off after 8 hours. Press the 'TIMER' button to deactivate it if continuous operation is desired.
  • Zkontrolujte, zda nejsou uvolněná spojení.
• Dálkové ovládání nefunguje:
  • Ensure there are no obstructions between the remote and the inline controller.
  • Check if the remote control battery needs replacement (if applicable, battery type not specified in product data).

Specifikace produktu

This image displays the rear of the product packaging, detailing specifications such as LED quantity, lead cord length, spacing, power requirements, and timer functions.

Záruka a podpora

For warranty information, technical support, or any inquiries regarding your Roman 50L USB Warm White LED String Lights, please refer to the product packaging or visit the official Roman webstránky pro kontaktní údaje.