StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

Model: RKCONS1901 Značka: StarTech.com

1. Úvod

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. Co je v krabici

  • Konzole KVM
  • 6 ft [1.8 m] KVM cable
  • Klecové matice M5
  • Šrouby M5

3. Nastavení a instalace

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 Montáž do racku

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 Propojovací kabely

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
Zadní view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

Obrázek 2: Zadní view of the KVM Console with connection ports.

3.3 Installation Video Reference

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. Návod k obsluze

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 Používání klávesnice a touchpadu

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 Navigace v nabídce OSD

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. Údržba

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • Čištění: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • Větrání: Ensure proper airflow around the console. Do not block ventilation openings.
  • Správa kabelů: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • Podmínky prostředí: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. Řešení problémů

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • Bez displeje: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • Klávesnice/myš nereaguje: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. Specifikace

FunkceSpecifikace
Číslo modeluRKCONS1901
ZnačkaStarTech.com
Výška stojanu1U
Velikost displeje19 palce
Typ zobrazeníActive Matrix TFT LCD
Maximální rozlišení1280x1024
Klávesnice99-key full keyboard with numeric keypad
Polohovací zařízeníTouchpad
Video rozhraníVGA
Podpora USBAno
Provozní teplota0 až 40 stupňů Celsia
MTBF50,000 hodin
Rozměry produktu (DxŠxV)21 x 19 x 1.7 palce
Hmotnost položky26.8 libry

8. Záruka a podpora

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

Související dokumenty - RKCONS1901

Předview StarTech.com 4/8/16portový 1U rackový VGA USB KVM přepínač s OSD - Uživatelská příručka
Podrobný uživatelský manuál pro 4/8/16portový 1U rackový VGA USB KVM přepínač StarTech.com s OSD (modely SV431DUSBU, SV831DUSBU, SV1631DUSBU). Seznamte se s instalací, provozem, funkcemi OSD, specifikacemi a technickou podpoře.
Předview StarTech.com 8portový KVM přepínač do racku - 4K 60Hz Uživatelská příručka
Uživatelská příručka pro 8portový rackový KVM přepínač StarTech.com R8AD122-KVM-SWITCH / R8AH202-KVM-SWITCH. Obsahuje podrobné pokyny k instalaci, připojení konzolí a počítačů a používání klávesových zkratek pro provoz v rozlišení 4K a 60 Hz.
Předview StarTech.com 4/8/16portový 1U rackový USB VGA KVM přepínač s uživatelskou příručkou OSD
Tato uživatelská příručka poskytuje podrobné informace o 4/8/16portovém 1U rackovém USB VGA KVM přepínači s OSD od společnosti StarTech.com, včetně instalace, provozu, specifikací a technické podpory.
Předview StarTech.com SV441DUSBI / SV841DUSBI 4/8portový vylepšený digitální USB KVM přepínač přes IP s... File Přenést uživatelskou příručku
Uživatelská příručka pro StarTech.com SV441DUSBI a SV841DUSBI 4/8portový vylepšený digitální USB KVM přepínač přes IP s... File Přenos. Zjistěte více o instalaci, konfiguraci, provozu, vzdálené správě a řešení problémů.
Předview StarTech.com SV231DVIUDDM a SV431DVIUDDM: Uživatelská příručka pro 2 a 4portový DVI USB KVM přepínač
Uživatelská příručka pro přepínače StarTech.com SV231DVIUDDM (2portový) a SV431DVIUDDM (4portový) DVI USB KVM s DDM. Zahrnuje instalaci, provoz, specifikace, funkce klávesových zkratek, technickou podporu a informace o záruce.
Předview StarTech.com ADJSHELFHD/ADJSHELFHDV 1U Nastavitelná pevná police do racku s vysokou nosností – Instalace a specifikace
Learn how to install and use the StarTech.com ADJSHELFHD and ADJSHELFHDV 1U adjustable high load fixed rackmount shelves. This guide covers installation steps, included accessories, and technical specifications for these durable server rack shelves.