Uživatelská příručka termostatu Honeywell TH6100AF2004 T6 Pro-1 Heat Slab Sensor

1. Úvod

The Honeywell TH6100AF2004 T6 Pro-1 Heat Slab Sensor Thermostat is designed to provide precise temperature control for heating systems, particularly those utilizing slab or floor heating. This thermostat offers flexible climate control options, allowing management of ambient air temperature, floor temperature, or a combination of both with defined limits. Its programmable features contribute to energy efficiency and enhanced comfort.

2. Klíčové vlastnosti

• 1-Stage Heat Only: Designed for single-stage topné systémy.
• Flexible Climate Control:
  • Ambient Air Temperature (A): Controls based on room air temperature.
  • Floor Temperature (F): Controls based on the temperature of the floor slab using a remote sensor.
  • Air Temperature with Min/Max Floor Limits (AF): Controls air temperature while maintaining floor temperature within specified minimum and maximum limits for comfort and floor protection.
• Antifreeze Temperature Protection: Prevents pipes from freezing in unoccupied spaces.
• Boiler Short Cycling Protection: Extends the life of heating equipment.
• Programovatelné možnosti: Supports 7-day, 5-2-day, or 5-1-1-day scheduling, or non-programmable operation.
• Vacation Hold Settings: Allows for extended temperature holds during absences.
• Úsporný režim: Overrides floor low limit settings during 'away' and 'sleep' periods to conserve energy.
• Velký LCD displej: Jasná a snadno čitelná obrazovka.
• Ovládání tlačítkem: Intuitive interface for adjustments.

3. Obsah balení

Ověřte, zda váš balíček obsahuje následující položky:

• Honeywell TH6100AF2004 T6 Pro-1 Thermostat
• Universal Mounting Plate (UWP)
• Standardní instalační adaptér (adaptér J-box)
• Cover Plate (for covering old thermostat marks)
• Montážní materiál (šrouby, hmoždinky)
• Floor Temperature Sensor (wired)
• Šroubovák

4. Nastavení a instalace

4.1. Bezpečnostní informace

VAROVÁNÍ: Elektrické nebezpečí.

Disconnect power at the circuit breaker or fuse box before installation to prevent electrical shock or equipment damage. Installation should be performed by a qualified technician. Read all instructions carefully before proceeding.

4.2. Zapojení

The TH6100AF2004 thermostat is designed for 24V AC systems. Ensure your heating system is compatible. Refer to your heating system's manual for specific wiring diagrams. Connect wires to the Universal Wiring Plate (UWP) terminals as indicated in the thermostat's wiring diagram. The floor sensor connects to the 'S1' and 'S2' terminals.

4.3. Montáž

1. Vypněte napájení topného systému jističem.
2. Odstraňte svůj starý termostat.
3. Mount the UWP to the wall using the provided screws and anchors. Ensure it is level.
4. Route the floor sensor cable to the desired location in the floor slab and connect it to the S1 and S2 terminals on the UWP.
5. Connect the system wires to the appropriate terminals on the UWP.
6. Align the thermostat with the UWP and push it firmly until it snaps into place.
7. Obnovte napájení topného systému.

5. Návod k obsluze

5.1. Zobrazit přesview

The large LCD display shows the current temperature, setpoint temperature, time, system mode, and fan status. Buttons below the display allow for mode selection, menu access, and temperature adjustments.

5.2. Nastavení teploty

To adjust the setpoint temperature, use the + or - buttons located below the display. The display will show the new setpoint briefly before returning to the current temperature.

5.3. Mode Selection (Heat, Off)

Stiskněte tlačítko Režim button to cycle through available system modes: Teplo a Vypnuto. Vybrat Teplo for active heating or Vypnuto deaktivovat topný systém.

5.4. Programový plán

The thermostat supports programmable schedules (7-day, 5-2-day, 5-1-1-day) or non-programmable operation. Access the Menu to configure your desired schedule. Follow the on-screen prompts to set specific temperatures for different times of the day and days of the week (e.g., Wake, Away, Home, Sleep periods).

5.5. Floor Temperature Control Options

The thermostat offers three control options, configurable in the installer setup menu:

• A (Ambient Air Temperature): The thermostat controls based solely on the air temperature sensor. The floor sensor is not actively used for control.
• F (Floor Temperature): The thermostat controls based solely on the floor sensor. The air temperature sensor is not actively used for control.
• AF (Ambient Air Temperature with Min/Max Floor Limits): The thermostat primarily controls based on the air temperature sensor, but will activate heating if the floor temperature drops below a set minimum limit, or deactivate if it exceeds a set maximum limit. This protects the floor and enhances comfort.

6. Údržba

6.1. Čištění

Očistěte vnější povrch termostatu měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla. Nestříkejte tekutiny přímo na termostat.

6.2. Péče o senzory

The floor temperature sensor is typically embedded in the floor slab and requires no direct maintenance. Ensure the sensor cable is not damaged during installation or subsequent floor work. If the sensor is exposed, keep it clean and free from debris.

7. Řešení problémů

Pokud máte problémy s termostatem, podívejte se na následující běžné problémy a jejich řešení:

• Žádný displej/prázdná obrazovka:
  • Check the circuit breaker and ensure power is supplied to the heating system and thermostat.
  • Verify that the thermostat is properly seated on the UWP.
• Heating Not Turning On:
  • Ensure the system mode is set to Teplo.
  • Increase the setpoint temperature above the current room temperature.
  • Check for error messages on the display.
  • Verify wiring connections at the UWP.
• Nepřesné údaje o teplotě:
  • Zajistěte, aby termostat nebyl vystaven přímému slunečnímu záření, průvanu nebo zdrojům tepla.
  • If using a floor sensor, ensure it is correctly installed and not damaged.
• Thermostat Not Responding to Button Presses:
  • A temporary power cycle (turn off power at breaker for 30 seconds, then restore) may resolve the issue.

If problems persist after attempting these troubleshooting steps, contact customer support.

8. Specifikace

9. Záruka a podpora

9.1. Informace o záruce

This Honeywell product is covered by a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Honeywell webUschovejte si doklad o koupi pro případ reklamace.

9.2. Zákaznická podpora

For technical assistance, troubleshooting guidance beyond this manual, or warranty inquiries, please contact Honeywell Customer Support. Contact information can typically be found on the product packaging, the official Honeywell website, or by calling the number provided in your product documentation.