RICOO R23-F TV Wall Mount Instruction Manual

1. Úvod

This manual provides detailed instructions for the safe and correct installation, operation, and maintenance of your RICOO R23-F TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. Proper installation is crucial for the safety and stability of your television.

2. Bezpečnostní informace

• Nosnost: Nepřekračujte maximální nosnost 95 kg. Překročení tohoto limitu může vést k vážnému zranění nebo poškození majetku.
• Typ stěny: The included screws and Fischer dowels/plugs are suitable for solid concrete walls only. For other wall types (e.g., wood stud, brick, drywall), consult a professional installer or use appropriate mounting hardware (not included).
• Kompatibilita VESA: Ensure your TV's VESA mounting pattern is compatible with the mount (200x200, 300x300, 400x200, 400x300, 400x400).
• Profesionální instalace: If you are unsure about the installation process or wall type, seek assistance from a qualified professional.
• Nástroje: K instalaci používejte vhodné nářadí. Používejte ochranné brýle a rukavice.
• Děti: Udržujte děti mimo oblast instalace.

3. Obsah balení

Please verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact RICOO customer support.

• RICOO R23-F TV Wall Mount assembly
• Mounting hardware kit (screws, washers, spacers)
• Fischer dowels/plugs (for solid concrete walls)
• Návod k použití

Poznámka: Specific quantities of screws and dowels may vary. Refer to the included hardware bag for exact counts.

4. Vlastnosti

• Adjustable Swivel: Swivels up to 180 degrees (if display width is max 80cm) for optimal viewing úhly.
• Nastavitelný sklon: Tilts +/-15 degrees to reduce glare and improve viewpohodlí.
• Front Plate Rotation: Rotates +/-6 degrees for ideal horizontal alignment after installation.
• Kompatibilita VESA: Supports VESA patterns 200x200, 300x300, 400x200, 400x300, 400x400.
• Doporučené velikosti obrazovky: Suitable for 32" to 65" displays.
• Vysoká nosnost: Supports up to 209 lbs (95 kg) thanks to durable cold-rolled steel construction.
• Nastavitelná vzdálenost od stěny: Extends from 115mm to 522mm from the wall.

5. Nastavení a instalace

Požadované nástroje (nejsou součástí dodávky): Drill, stud finder (if not concrete wall), level, screwdriver, pencil, measuring tape.

5.1. Příprava televizoru

1. Opatrně položte televizor displejem dolů na měkký, čistý povrch, abyste zabránili poškrábání.
2. Identifikujte montážní otvory VESA na zadní straně televizoru.
3. Attach the vertical TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are securely fastened but do not overtighten. The rails are continuously adjustable to fit various TV sizes.

Obrázek 1: Konecview of the RICOO R23-F TV Wall Mount components and included hardware.

5.2. Namontujte nástěnnou desku

1. Determine the desired height and position for your TV. Use a pencil to mark the drill holes for the wall plate.
2. Pro pevné betonové stěny: Drill pilot holes at the marked locations. Insert the Fischer dowels/plugs into the holes.
3. Position the wall plate over the drilled holes and secure it to the wall using the provided screws. Use a level to ensure the wall plate is perfectly horizontal before fully tightening all screws.
4. Důležité: For other wall types (e.g., wood stud, brick, drywall), specialized anchors and screws are required and are not included. Consult a professional for proper installation on these surfaces.

5.3. Attach the TV to the Wall Mount

1. With assistance, carefully lift the TV (with attached brackets) and hook the brackets onto the arms of the wall mount.
2. Ensure the TV is securely seated on the mount. Engage any safety locking mechanisms if present.

6. Návod k obsluze (Úpravy)

The RICOO R23-F mount offers various adjustments for optimal viewIng.

6.1. Nastavení otočení

The mount allows for 180-degree continuous swiveling. Gently push or pull the TV to the desired left or right angle. Ensure the TV's width does not exceed 80cm for full 180-degree movement.

Image 2: Demonstrates the 180-degree swivel capability and the extendable/retractable arm of the mount.

6.2. Nastavení sklonu

To adjust the tilt angle (+/-15 degrees), loosen the tilt adjustment knobs or bolts on the TV brackets, set the TV to the desired vertical angle, and then securely tighten the knobs/bolts.

6.3. Front Plate Rotation

For minor horizontal alignment adjustments after installation, the front plate can be rotated +/-6 degrees. Loosen the rotation screws, adjust the TV to be perfectly level, and then retighten the screws.

Image 3: Illustrates the +/-6 degree front plate rotation, adjustable rails for various TV sizes, and +/-15 degree tilt adjustment.

6.4. Prodloužení a zatažení

The articulating arm allows the TV to be extended from the wall (115mm to 522mm) or pushed back closer to the wall. Gently pull or push the TV to achieve the desired wall distance.

7. Údržba

• Pravidelná kontrola: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevně utažené a bezpečné.
• Čištění: Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
• Mazání: Moving parts are designed for smooth operation. No regular lubrication is typically required. If movement becomes stiff, contact customer support.

8. Řešení problémů

• Televizor není vodorovně umístěn: Check the front plate rotation adjustment (Section 6.3) and ensure the wall plate was installed level.
• Držák se zdá být nestabilní: Recheck all wall and TV attachment screws for tightness. Ensure the wall type is appropriate for the installed hardware. Do not exceed the weight capacity.
• Obtížnost s nastavením náklonu/otočení: Ensure no cables are snagged. For tilt, loosen adjustment knobs before attempting to change the angle.
• TV does not fit: Verify your TV's VESA pattern matches the mount's compatibility (200x200, 300x300, 400x200, 400x300, 400x400) and that your screen size is within the recommended 32"-65" range.

9. Specifikace

10. Záruka a podpora

For warranty information, technical support, or to inquire about replacement parts, please contact RICOO customer service directly. Refer to the product packaging or the official RICOO webstránky pro kontaktní údaje.