Zavedení
The Silk’n Titan is a revolutionary anti-aging treatment device designed to help you achieve a radiant, younger look. It utilizes Collagen and Elastin Remodeling (CER) energy to repair, improve, and brighten skin from the inside out.
This manual provides essential information for the safe and effective use of your Silk’n Titan device. Please read it thoroughly before first use.
Image: The Silk'n Titan device, a compact and ergonomic tool for skin rejuvenation.
Nastavení
Before using your Silk’n Titan device, ensure you have read the entire user manual. Prepare your skin by cleaning the treatment area thoroughly.
- Rozbalte zařízení: Carefully remove the Silk’n Titan device and all accessories from its packaging.
- Připojte napájení: Plug the power adapter into the device and then into a suitable electrical outlet. The device is designed for corded operation.
- Zapnutí: Press and hold the power button on the device until the indicator light illuminates. Always begin treatment on the lowest setting.
- Aplikujte gel: Apply a thin, even layer of the Silk’n Slider Gel (or a similar water-based conductive gel) to the treatment surface of the device. Alternatively, apply the gel directly to the skin area you intend to treat.
Image: Applying conductive gel to the Silk'n Titan device before use.
Návod k obsluze
The Silk’n Titan device uses a combination of Bi-Polar RF energy, LED light energy, and IR heat energy to stimulate collagen and elastin production.
- Vyberte oblast ošetření: Identify the specific area you wish to treat (e.g., forehead, cheeks, jawline, neck). Refer to the treatment zone diagram for guidance.
- Použít zařízení: Place the treatment surface of the device firmly against the skin in the chosen area. Ensure good contact.
- Hnutí: Move the device in slow, circular, or upward J-strokes across the treatment area. Maintain continuous movement to prevent overheating in one spot.
- Délka léčby: Each single treatment area typically takes 10 to 15 minutes. The device will gradually warm up the skin.
- Nastavení úrovně výkonu: Once the skin in the treated area feels comfortably warm, you may increase the power level by pressing the power button briefly. Do not increase the power level if the sensation is uncomfortable.
- Repeat for Other Areas: After completing one area, proceed to the next desired treatment area and repeat the process.
- Treatment Frequency: For initial results, treat twice a week for 10 weeks. For maintenance, treat once every two weeks after the initial 10-week period.
Image: Woman using the Silk'n Titan device for skin tightening and lifting.
Image: Recommended treatment zone order for best results with the Silk'n Titan.
Note: Official product videos may be available on the manufacturer's website or authorized retail channels. This manual does not include embedded videos as per content guidelines for this specific request.
Údržba
Proper maintenance ensures the longevity and effectiveness of your Silk’n Titan device.
- Čištění po použití: After each treatment session, unplug the device and allow it to cool down. Gently wipe the treatment surface with a dry, clean cloth to remove any residual gel.
- Skladování: Zařízení skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a vlhkosti. Pokud jej nepoužíváte, uchovávejte jej v originálním obalu nebo ochranném pouzdře.
- Vyhněte se agresivním chemikáliím: Do not use abrasive cleaners, alcohol, or harsh chemicals to clean the device, as this may damage the surface or internal components.
Odstraňování problémů
If you encounter issues with your Silk’n Titan device, refer to the following common troubleshooting tips:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Zařízení se nezapne. | Not properly plugged in; power button not held long enough. | Ensure the power adapter is securely plugged into both the device and the electrical outlet. Press and hold the power button for a few seconds until the indicator light appears. |
| No warmth or sensation during treatment. | Insufficient gel applied; poor skin contact; power level too low. | Apply more conductive gel to the treatment surface and/or skin. Ensure the device makes full contact with the skin. Increase the power level gradually if comfortable. |
| Skin feels too hot or uncomfortable. | Device held stationary; power level too high. | Ensure continuous movement of the device across the skin. Reduce the power level. If discomfort persists, stop treatment and consult a healthcare professional. |
| Indicator lights are not functioning as expected. | Porucha zařízení. | Unplug the device, wait a few minutes, and plug it back in. If the issue persists, contact customer support. |
Pro podrobnější informace o řešení problémů se prosím obraťte na oficiální Průvodce řešením problémů (PDF) available from Silk'n.
Specifikace
- Značka: Silk'n
- Číslo modelu: 07290015763851
- Rozměry produktu: 2.54 x 8.64 x 7.92 palce
- Hmotnost položky: 1.4 libry
- Výrobce: Silk'n
- Kompatibilita typu pleti: Vše
- Materiál: Silk (referring to the brand name)
Informace o záruce
For specific warranty details and terms, please refer to the documentation included with your Silk’n Titan device or visit the official Silk'n webUschovejte si doklad o koupi pro případ reklamace.
Zákaznická podpora
If you require further assistance or have questions not covered in this manual, please contact Silk'n customer support through their official webwebu nebo kontaktních informací uvedených na obalu produktu.
