WORKPRO W051002 10palcový plochý File Uživatelská příručka

1. Úvod

The WORKPRO W051002 10-inch flat file is a versatile hand tool designed for material removal, sharpening, and deburring tasks. Constructed from durable alloy steel with a comfortable, anti-slip grip, this file is suitable for various applications in workshops, garages, and for DIY projects.

2. Bezpečnostní informace

Always observe the following safety precautions when using the WORKPRO W051002 flat file:

• Ochrana očí: Vždy používejte ochranné brýle nebo ochranné brýle, abyste si chránili oči před odletujícími úlomky.
• Ochrana rukou: Consider wearing gloves to prevent cuts and abrasions.
• Zajištění obrobku: Ensure the item being filed is securely clamped in a vise or held firmly to prevent movement.
• Správný úchop: Maintain a firm, comfortable grip on the handle to ensure control during filing.
• Filing Direction: Files cut on the forward stroke only. Do not apply pressure on the backstroke, as this dulls the file zuby.
• Avoid Prying: Nepoužívejte file as a pry bar or chisel, as this can damage the file or cause injury.
• Čistota: Udržujte file clean and free of debris to maintain its cutting efficiency.

3. Komponenty produktu

The WORKPRO W051002 flat file consists of two primary parts: the blade and the handle.

• File Čepel: Made from alloy steel, the 10-inch blade features precise coated teeth. One face of the file has a double cut for aggressive material removal, while the sides feature a single cut for finer work and finishing.
• Zacházet s: The ergonomic handle is designed with an anti-slip grip (blue and red color) to provide comfort and control during use.

Obrázek 1: Plná view of the WORKPRO W051002 10-inch Flat File, showing the alloy steel blade and the ergonomic blue and red handle.

Obrázek 2: Detail view z file's double-cut teeth pattern, designed for efficient material removal.

4. Setup for Use

Before beginning any filing task, ensure your workspace is prepared:

1. Vyčistit pracovní prostor: Ujistěte se, že pracovní prostor je čistý a bez překážek.
2. Zajištění obrobku: Firmly secure the item you intend to file. A bench vise is recommended for stability.
3. Osobní ochranné prostředky: Put on safety glasses and any other necessary protective gear.

5. Návod k obsluze

The WORKPRO W051002 flat file is effective for both sharpening tools and deburring materials.

5.1 Sharpening Tools

To sharpen tools such as blades, axes, or other cutting edges:

1. Identify Angle: Determine the existing bevel angle of the tool's edge.
2. Pozice File: Podržte file at the same angle as the tool's bevel.
3. Zdvih vpřed: Apply firm, even pressure on the forward stroke, moving the file across the edge. Lift the file slightly or release pressure on the return stroke.
4. Konzistence: Maintain a consistent angle and pressure for an even sharpen.
5. Zkontrolujte otřepy: After several strokes, check the opposite side of the edge for a small burr, indicating material removal.
6. Odstranění otřepů: Lehce file the burr off by taking a few gentle strokes on the opposite side or using the single-cut side of the file.

5.2 Deburring Items

To remove sharp edges or burrs from metal or other materials:

1. Zabezpečená položka: Ensure the item is firmly secured.
2. Úhel File: Podržte file at a slight angle to the edge you wish to deburr.
3. Smooth Strokes: Use smooth, controlled forward strokes along the edge. The single-cut sides of the file are often suitable for finer deburring.
4. Kontrolovat: Regularly inspect the edge to avoid over-filing.

Figure 3: The WORKPRO flat file being used to deburr a metal workpiece, demonstrating proper grip and application.

6. Údržba

Proper maintenance extends the life and effectiveness of your file:

• Čistěte pravidelně: Po každém použití vyčistěte file teeth with a file card or stiff wire brush to remove accumulated metal particles (pinning). This prevents clogging and maintains cutting efficiency.
• Skladování: Uložte file in a dry place to prevent rust. Avoid storing files in contact with other tools, as this can dull the teeth. A file rack or individual sleeves are ideal.
• Oil Protection: For long-term storage, a light coat of oil can be applied to the blade to prevent corrosion.

7. Řešení problémů

Pokud narazíte na problémy s vaším file:

• File Not Cutting:
  • Ensure you are applying pressure only on the forward stroke.
  • Vyčistěte file teeth with a file card to remove any embedded material.
  • The file may be dull and require replacement if cleaning does not restore cutting ability.
• Nerovnoměrný povrch:
  • Zkontrolujte, zda je obrobek bezpečně upevněnampa nehýbe se.
  • Maintain a consistent angle and pressure throughout the filing stroke.

8. Specifikace

9. Záruka a podpora

For warranty information or technical support regarding your WORKPRO W051002 10-inch flat file, please contact WORKPRO customer service. Refer to the product packaging or the official WORKPRO webstránky s nejaktuálnějšími kontaktními údaji.

Visit the WORKPRO Store on Amazon