Návod k obsluze k úchytce dveří Grandeur 813868 Carré' s vysokým talířem Biarritz Passage.

1. Konec produktuview

The Grandeur 813868 Carre' Tall Plate Biarritz Passage Door Knob is designed for interior doors where a locking mechanism is not required, such as hallways or closet doors. This model features a distinctive tall plate design, ideal for doors 84 inches or higher, ensuring an aesthetically balanced appearance. Crafted from solid, forged brass, it offers durability and a polished brass finish for a classic look. This passage knob is designed for a 2.75-inch backset.

Image 1.1: Grandeur Carre' Tall Plate Biarritz Passage Door Knob. This image displays the polished brass tall plate with a clear, faceted Biarritz knob, designed for interior passage doors.

2. Bezpečnostní informace

• Během instalace vždy používejte vhodné osobní ochranné prostředky, jako jsou ochranné brýle.
• Udržujte malé části mimo dosah dětí, abyste předešli nebezpečí udušení.
• Exercise caution when using power tools to avoid injury.
• Ensure all screws are tightened securely, but do not overtighten, which could strip threads or damage components.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Exterior Door Knob with Tall Plate
• Interior Door Knob with Tall Plate
• Latch Mechanism (for 2.75" backset)
• Standard Spindle
• Úderová deska
• Montážní šrouby
• Drilling Template (if applicable)

4. Nastavení a instalace

Požadované nástroje: Phillips head screwdriver, tape measure, pencil, drill (if door is not pre-drilled), wood chisel (optional).

1. Připravte dveře: Ensure your door has standard bore holes (typically 2-1/8" diameter) and a cross bore for the latch. The backset (distance from door edge to center of bore hole) should be 2.75 inches. If not pre-drilled, use the provided drilling template to mark and drill the necessary holes.
2. Install the Latch Mechanism: Insert the latch mechanism into the cross bore hole on the edge of the door. Ensure the bevel of the latch bolt faces the door frame. Secure the latch faceplate with the provided screws. If necessary, use a wood chisel to create a shallow mortise for the faceplate to sit flush with the door edge.
3. Install the Exterior Knob Assembly: Place the exterior knob assembly (knob and tall plate) onto the door, aligning the spindle receiver with the latch mechanism.
4. Insert the Spindle: Insert the square spindle through the latch mechanism from the exterior side, ensuring it passes through the spindle receiver on the exterior knob.
5. Install the Interior Knob Assembly: Position the interior knob assembly over the spindle and align the mounting posts with the holes on the exterior plate.
6. Secure the Assemblies: Insert the long mounting screws through the interior plate and into the mounting posts on the exterior plate. Tighten the screws evenly until the knob assemblies are secure and flush against the door. Do not overtighten.
7. Instalace protikusu: Close the door and mark the position of the latch bolt on the door frame. Chisel out a shallow mortise for the strike plate and secure it with the provided screws. Ensure the latch bolt engages smoothly with the strike plate.
8. Testovací provoz: Turn both the interior and exterior knobs to ensure the latch retracts smoothly. Check that the door closes and latches properly.

5. Návod k obsluze

To open a door equipped with the Grandeur 813868 Passage Door Knob, simply turn the knob in either direction. The latch bolt will retract, allowing the door to open. Release the knob to allow the latch bolt to extend and secure the door when closed.

6. Údržba

• Čištění: Clean the polished brass finish with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie, protože by mohly poškodit povrchovou úpravu.
• Mazání: If the latch mechanism becomes stiff over time, a small amount of silicone-based lubricant can be applied to the moving parts of the latch bolt. Do not use oil-based lubricants, which can attract dust and grime.
• Utahování: Periodically check and tighten any loose mounting screws to ensure optimal performance and prevent wobbling.

7. Řešení problémů

• Knob is loose or wobbly:
  Ensure all mounting screws are securely tightened. If the screws are stripped, they may need to be replaced with slightly larger ones or the holes repaired.
• Latch bolt does not retract smoothly:
  Check for any obstructions in the latch mechanism or the strike plate. Ensure the spindle is correctly aligned and not binding. Apply a silicone-based lubricant if necessary.
• Door does not latch properly:
  Verify that the strike plate is correctly aligned with the latch bolt. Adjust the strike plate position if needed. Ensure the door frame is not warped.

8. Specifikace

9. Záruka a podpora

This Grandeur product is backed by a Doživotní záruka. For warranty claims, technical assistance, or replacement parts, please contact Grandeur customer support directly. Refer to the official Grandeur website or your purchase documentation for specific contact information.

Pro další informace můžete navštívit Grandeur Store on Amazon.