1. Úvod
This manual provides instructions for the proper installation, operation, and maintenance of your Rockler Phenolic Router Plate with Standard 4-inch Insert. This durable router plate is designed to integrate with router tables, offering a stable and low-friction surface for precision routing tasks. Please read these instructions thoroughly before use to ensure safe and effective operation.
Image 1.1: The Rockler Phenolic Router Plate with its standard 4-inch diameter insert removed, showcasing the durable blue phenolic material and the central opening for router bit access.
2. Bezpečnostní informace
Always observe general woodworking safety practices when using this product in conjunction with a router and router table. Failure to follow safety guidelines can result in serious injury.
- Vždy používejte vhodné osobní ochranné prostředky (OOP), včetně ochrany očí, ochrany sluchu a protiprachové masky.
- Ensure your router is unplugged before performing any installation, adjustments, or maintenance on the router plate or router.
- Verify that the router plate is securely fastened to your router table and that the router is properly mounted to the plate before operation.
- Keep hands and fingers clear of the router bit during operation.
- Udržujte čistou a dobře osvětlenou pracovní plochu.
3. Obsah balení
The Rockler Phenolic Router Plate package typically includes the following components:
- 1x Rockler Phenolic Router Plate (8-1/4" x 11-3/4" x 3/8")
- 1x Standard 4-inch Diameter Insert Ring (Plastic)
- Mounting hardware (screws for attaching router to plate, not for table)
Image 3.1: An illustration showing the Rockler Phenolic Router Plate and its accompanying standard insert ring, highlighting the components included in the package.
4. Nastavení a instalace
Follow these steps to install the router plate into your router table and attach your router.
4.1 Preparing Your Router Table
- Ensure your router table opening is compatible with the plate dimensions (8-1/4" x 11-3/4").
- If your table requires a specific recess, ensure it is accurately cut to allow the plate to sit flush with the table surface.
- Secure the router plate to your router table using appropriate mounting hardware (not included with the plate, typically supplied with the router table or purchased separately). Ensure the plate is level and firmly seated.
4.2 Mounting Your Router to the Plate
This router plate is non-drilled, meaning you will need to drill mounting holes specific to your router's baseplate pattern.
- Remove the baseplate from your router.
- Center the router baseplate on the underside of the Rockler Phenolic Router Plate. Align the center hole of your router's baseplate with the center opening of the router plate.
- Mark the mounting holes: Use a pencil or marker to accurately transfer the mounting hole pattern from your router's baseplate onto the phenolic router plate.
- Vyvrtejte vodicí otvory: Carefully drill pilot holes through the phenolic plate at the marked locations. Use a drill bit size appropriate for the screws that will secure your router. Start with a smaller pilot hole and gradually increase if necessary to prevent cracking the phenolic material.
- Countersink holes (optional): If your router's mounting screws require it, countersink the holes on the top surface of the router plate so the screw heads sit flush or slightly below the surface.
- Attach the router: Align your router with the drilled holes on the underside of the phenolic plate and secure it using the appropriate screws. Ensure the router is firmly attached and does not wobble.
Image 4.1: The Rockler Phenolic Router Plate shown installed in a router table, with a router mounted underneath and a router bit extending through the insert ring.
5. Provoz
The Rockler Phenolic Router Plate facilitates various routing operations when integrated into a router table. Its design allows for convenient bit changes and height adjustments.
5.1 Changing Router Bits and Adjusting Height
One of the key features of this plate is the ease of access it provides for router maintenance.
- Vypnout: Always ensure the router is unplugged before attempting any bit changes or adjustments.
- Remove Insert Ring: Lift out the standard 4-inch insert ring from the plate.
- Lift Router: The plate allows you to easily lift your router (still attached to the plate) out of the router table opening. Place it on the table surface for comfortable access.
- Změna bitu: With the router inverted and accessible, change the router bit as per your router's instructions.
- Upravit výšku: Make any necessary height adjustments to your router bit.
- Přeinstalovat: Carefully lower the router and plate back into the router table opening, ensuring it seats properly. Reinsert the 4-inch insert ring.
5.2 General Routing Practices
- Always use a router fence for straight cuts and appropriate jigs for curved or specialized operations.
- Feed material consistently and at a moderate pace to prevent burning and ensure a clean cut.
- For deep cuts, make multiple passes, gradually increasing the depth of cut.
- Ensure the workpiece is properly supported and clamped if necessary.
Image 5.1: This image illustrates the convenience of the router plate, allowing the router to be easily lifted for bit changes, height adjustments, and maintenance.
6. Údržba
Proper maintenance will extend the life and performance of your Rockler Phenolic Router Plate.
- Čištění: Regularly clean the surface of the router plate to remove sawdust, resin, and debris. Use a soft cloth and a mild cleaner. Avoid abrasive cleaners or solvents that could damage the phenolic material.
- Mazání: The phenolic surface is naturally low-friction. Avoid applying waxes or lubricants that could attract dust or interfere with workpiece movement.
- Inspekce: Periodically inspect the plate for any signs of damage, warping, or wear. Ensure all mounting screws remain tight.
- Skladování: If removing the plate for storage, store it flat in a dry environment to prevent warping.
7. Řešení problémů
Zde jsou některé běžné problémy a jejich možná řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Router plate not sitting flush in table. | Incorrect router table opening size or uneven recess. | Verify router table opening dimensions. Adjust recess depth or shim as needed to achieve a flush fit. |
| Router wobbles on the plate. | Loose mounting screws or improperly drilled holes. | Tighten all router mounting screws. If holes are stripped, consider using slightly larger screws or repair the holes. |
| Workpiece snags or sticks on the plate. | Accumulated dust/debris or damaged surface. | Clean the plate thoroughly. Inspect for damage; if severely damaged, replacement may be necessary. |
| Insert ring is not flush. | Debris under the insert or manufacturing variation. | Clean the recess for the insert ring. Ensure the insert is seated correctly. |
8. Specifikace
- Model: Rockler Phenolic Router Plate
- Materiál: Solid Phenolic
- Rozměry desky: 8-1/4" (W) x 11-3/4" (L) x 3/8" (T)
- Insert Ring Diameter: 4 inches (Standard)
- Insert Ring Material: Plast
- Plate Color: Modrý
- Montáž: Non-drilled for custom router fitment
Image 8.1: A visual representation of the Rockler Phenolic Router Plate with its key specifications listed, including dimensions and material.
9. Záruka a podpora
Rockler products are manufactured to high standards. For specific warranty information or technical support, please refer to the official Rockler website or contact Rockler customer service directly. Keep your purchase receipt for warranty claims.
Kontaktní údaje:
- Webmísto: www.rockler.com
- Služby zákazníkům: Viz website for current contact methods (phone, email, chat).
