nVent RAYCHEM FrostGuard 120V Pipe Freeze Protection Heating Cable Instruction Manual

1. Úvod

The nVent RAYCHEM FrostGuard 120V heating cable is designed to prevent pipes from freezing, thereby avoiding potential damage and costly repairs. This self-regulating heating cable provides an energy-efficient solution for pipe freeze protection in various applications. This manual provides essential information for the safe and effective installation, operation, and maintenance of your FrostGuard heating cable.

nVent RAYCHEM FrostGuard 120V heating cable kit in packaging with lighted plug connected to an outlet.

Obrázek 1: nVent RAYCHEM FrostGuard 120V heating cable kit. The image shows the product packaging, the coiled heating cable, and the lighted plug inserted into a wall outlet, indicating power.

2. Důležité bezpečnostní informace

Please read and understand all safety instructions before installing or operating the FrostGuard heating cable. Failure to follow these instructions may result in electric shock, fire, or property damage.

Ground-Fault Protection: A 30-mA equipment or 5-mA personnel ground-fault protection device (GFPD) must be used on each FrostGuard heating cable branch circuit. This is a critical safety requirement.
Elektrické napájení: Ensure the electrical supply matches the cable's voltage (120 V).
Izolace: Always cover the installed heating cable with appropriate pipe insulation to ensure efficient operation and safety.
Vyhněte se překrývání: While the cable is self-regulating and designed to prevent overheating, avoid excessive overlapping or tight coiling during installation to optimize performance and longevity.
Damaged Cable: Do not use if the heating cable or plug is damaged. Contact a qualified electrician for inspection or replacement.
Zamýšlené použití: This product is designed for pipe freeze protection and roof/gutter de-icing. Do not use for purposes other than those specified.
Kvalifikovaný personál: Instalaci by měl provádět kvalifikovaný personál v souladu s místními elektrotechnickými předpisy.

3. Konec produktuview

The RAYCHEM FrostGuard heating cable is a preassembled, self-regulating cable designed for ease of use and reliable performance. Key features include:

Samoregulační technologie: The cable automatically adjusts its heat output based on ambient temperature, providing energy efficiency and preventing overheating.
Preassembled Kit: Comes ready to install with a lighted plug for easy connection to a GFI-protected electrical supply. The lighted plug indicates power is supplied to the cable.
Všestranná aplikace: Suitable for both metal and plastic pipes up to 2.5 inches in diameter. Can also be used for roof and gutter de-icing.
Bezúdržbový: Designed for long-term, reliable operation with no moving parts requiring maintenance.
Bezpečný provoz: Engineered to be safe even if overlapped, though optimal performance is achieved with proper spacing.

4. Specifikace

Funkce	Detail
Číslo modelu	P000002024
Značka	nVent RAYCHEM
svtage	120 voltů
Wattage	108 wattů
Délka položky	18 stop (216 palců)
Materiál	Metal (heating element)
Barva	Černý
Hmotnost položky	2.2 libry
Kompatibilita průměrů potrubí	Up to 2.5 Inches (Outside Diameter)
Specifická použití	Pipe freeze protection, Residential plumbing, Commercial buildings, Industrial facilities, Roof & Gutter De-icing
UPC	715629008121

5. Nastavení a instalace

Proper installation is crucial for the safe and effective operation of your FrostGuard heating cable. Follow these steps carefully:

Zkontrolujte kabel: Before installation, visually inspect the heating cable for any signs of damage. Do not install a damaged cable.
Připravte potrubí: Ensure the pipe surface is clean and dry. The cable can be installed on metal or plastic pipes.
Připojte kabel:
- Pro metal pipes, run the cable straight along the bottom of the pipe. Secure it every 12 inches with electrical tape or cable ties designed for heating cables.
- Pro plastic pipes, run the cable straight along the bottom of the pipe, then wrap the pipe with aluminum foil tape before securing the cable. This helps distribute heat evenly.
- Pro valves, spigots, or other irregular shapes, coil the cable around the component to ensure adequate heat coverage. Ensure the cable does not cross over itself excessively.
Insulate the Pipe: After securing the heating cable, cover the entire pipe and cable assembly with at least 1/2 inch of approved pipe insulation. This is essential for energy efficiency and to prevent heat loss.
Připojení k napájení: Plug the preassembled lighted plug into a 120V electrical outlet that is protected by a 30-mA equipment or 5-mA personnel ground-fault protection device (GFPD). The lighted plug will illuminate when power is supplied.

Diagram showing heating cable installation on a pipe valve and a roof gutter.

Obrázek 2: Instalace napřamples. The top illustration shows the heating cable wrapped around a pipe valve for freeze protection. The bottom illustration depicts the cable installed in a zigzag pattern along a roof edge and gutter for de-icing.

6. Návod k obsluze

The nVent RAYCHEM FrostGuard heating cable is designed for automatic operation:

Once plugged into a GFPD-protected 120V outlet, the cable will automatically sense the ambient temperature.
The self-regulating technology will adjust the heat output to maintain the pipe temperature above freezing.
The lighted plug serves as a visual indicator that the cable is receiving power. If the light is off, check the power supply and GFPD.
For optimal energy efficiency, ensure the cable remains plugged in during freezing conditions.

7. Údržba

The nVent RAYCHEM FrostGuard heating cable is designed to be maintenance-free due to its robust construction and self-regulating properties. No moving parts require lubrication or adjustment.

However, it is recommended to perform an annual visual inspection before the onset of cold weather:

Check the cable and plug for any visible damage, cuts, or abrasions.
Ensure the pipe insulation is intact and securely covering the cable. Repair or replace any damaged insulation.
Verify that the GFPD is functioning correctly by pressing its "Test" button.

8. Řešení problémů

If your FrostGuard heating cable is not functioning as expected, consider the following:

Problém	Možná příčina	Řešení
Cable not heating / Lighted plug is off	No power to the outlet, GFPD tripped, or damaged cable/plug.	Zkontrolujte, zda je zásuvka pod napětím, zapojením jiného zařízení. Reset the GFPD (Ground-Fault Protection Device). Zkontrolujte kabel a zástrčku, zda nejsou viditelně poškozené. Pokud je poškozené, přestaňte je používat a vyměňte.
Pipes still freezing despite cable being on	Insufficient insulation, cable not properly installed, or extreme cold.	Ensure adequate pipe insulation (at least 1/2 inch). Verify the cable is securely attached along the pipe and around valves. In extremely cold conditions, additional insulation or a higher wattage cable might be required (consult a professional).
GFPD trips frequently	Moisture ingress, damaged cable, or faulty GFPD.	Ensure all connections are dry and protected from moisture. Inspect the cable for any damage that could expose the heating element. If the problem persists after checking the cable, the GFPD itself might be faulty and require replacement by a qualified electrician.

9. Záruka a podpora

Specific warranty details for the nVent RAYCHEM FrostGuard heating cable are typically provided with the product packaging or can be obtained from the manufacturer's official website. Please refer to the documentation included with your purchase for the most accurate and up-to-date warranty information.

For technical support, installation assistance, or warranty claims, please contact nVent customer service or visit their official webstránky. Uschovejte si doklad o koupi pro případné dotazy týkající se záruky.

Výrobce: nVent

Webmísto: www.nvent.com

	Instalační příručka elektronického termostatu s povrchovým snímáním nVent RAYCHEM ETS-05 Komplexní průvodce instalací a provozem elektronického termostatu nVent RAYCHEM ETS-05 s povrchovým snímáním. Zahrnuje funkce, schválení, zapojení, umístění senzorů, nastavení a údržbu pro regulaci teploty kabelů doprovodného otápění.
	Řešení pro doprovodné otápění nVent v průmyslu: Katalog a průvodce projektováním RAYCHEM a TRACER Komplexní průvodce průmyslovými systémy doprovodného otápění nVent RAYCHEM a nVent TRACER. Prozkoumejte samoregulační, výkonově omezující, minerálně izolované, dlouhé topné potrubí, svazky trubek a řídicí systémy pro ochranu proti zamrznutí, udržování teploty a procesní ohřev.
	Průvodce návrhem minerálně izolovaných topných kabelů nVent RAYCHEM Komplexní průvodce systémy doprovodného otápění s minerální izolací (MI) od společnosti nVent RAYCHEM, který zahrnuje aplikace, konstrukci, tepelný návrh, výběr a příslušenství pro průmyslové doprovodné otápění.
	Instalační příručka pro modul řízení výkonu nVent RAYCHEM ACS-PCM2-5 Comprehensive installation instructions for the nVent RAYCHEM ACS-PCM2-5 Power Control Module, designed for use with the RAYCHEM ACS-UIT2 system. Covers mounting, wiring, RS-485 network configuration, and safety precautions for heat tracing applications.
	Pokročilý instalační průvodce nVent ERIFLEX FleXbus Komplexní instalační průvodce pro systém přípojnic nVent ERIFLEX FleXbus Advanced, který zahrnuje nastavení, připojení a volitelné příslušenství. Naučte se, jak bezpečně a efektivně nainstalovat systém FleXbus.
	nVent LENTON Inlet/Outlet Plug: Specifications and Installation Detailed information on the nVent LENTON Inlet/Outlet Plug, including features, specifications, and installation warnings. Designed for schedule 40 PVC pipe.

nVent P000002024