LEDVANCE Sylvania 74246 1x4 ft. Integrated LED Edge-Lit Panel Light with Emergency Battery Backup User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your LEDVANCE Sylvania 74246 1x4 ft. Integrated LED Edge-Lit Panel Light with Emergency Battery Backup. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for indoor use and provides efficient, cool white illumination with an integrated emergency power source.

2. Bezpečnostní informace

Dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození produktu:

• Elektrická bezpečnost: Always disconnect power at the circuit breaker before installation, maintenance, or servicing. Ensure all wiring complies with national and local electrical codes.
• Kvalifikovaný personál: Installation and servicing should only be performed by a qualified electrician.
• Zacházení: Handle the LED panel with care to avoid damage to the light source or frame.
• Prostředí: Tento výrobek je určen pouze pro použití v interiéru. Nevystavujte vlhkost ani extrémním teplotám.
• Nouzová baterie: The emergency battery backup system requires periodic testing to ensure proper function. Refer to the operation section for testing procedures.
• svtage: Zajistěte přívod objtagodpovídá uvedenému objemu produktutage (277 voltů).

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1x LEDVANCE Sylvania 1x4 ft. Integrated LED Edge-Lit Panel Light with Emergency Battery Backup
• Instalační příručka (tento návod)

Figure 1: LEDVANCE Sylvania 1x4 ft. Integrated LED Edge-Lit Panel Light. A top-down view of the LEDVANCE Sylvania 1x4 ft. Integrated LED Edge-Lit Panel Light. The panel is white with a thin silver-colored frame, designed for ceiling installation.

4. Specifikace

5. Pokyny k instalaci

Důležité: Installation must be performed by a qualified electrician and in accordance with all applicable electrical codes.

5.1 Kontrolní seznam před instalací

• Ujistěte se, že je jistič VYPNUTÝ.
• Ověřte objem dodávkytage je 277V.
• Zkontrolujte, zda je veškerý obsah balení přítomen a nepoškozen.
• Gather necessary tools (e.g., screwdriver, wire strippers, drill, mounting hardware if not included for specific mounting type).

5.2 Možnosti montáže

This panel light supports surface mount installation. For recessed T-grid ceiling installations, additional clips (not included) may be required.

5.3 Pokyny pro zapojení

1. Odpojit napájení: Vypněte napájení hlavním jističem.
2. Přístupový prostor pro kabeláž: Locate and open the wiring compartment on the back of the LED panel.
3. Připojit dráty:
   • Připojte černý vodič od svítidla k žít (hot) wire from the power supply.
   • Připojte bílý vodič od svítidla k neutrální vodič ze zdroje napájení.
   • Připojte zelený or Holá měď vodič od svítidla k země vodič ze zdroje napájení.
   • For the emergency battery backup, ensure the dedicated unswitched AC power line is connected as per local codes to allow continuous charging.
4. Zabezpečená připojení: Use appropriate wire connectors (e.g., wire nuts) to secure all connections.
5. Zavřít přihrádku: Carefully tuck all wires into the wiring compartment and close the cover securely.

5.4 Montáž panelu

1. Umístění: Carefully position the LED panel in the desired location.
2. Bezpečná montáž: For surface mount, use appropriate screws and anchors (not included) to secure the panel directly to the ceiling or wall structure. Ensure the mounting is robust enough to support the panel's weight (approx. 5.99 lbs).
3. Závěrečná kontrola: Double-check all connections and mounting security.

6. Provoz

6.1 Normální provoz

1. Zapnutí: Jakmile je instalace dokončena a ověřena, obnovte napájení jističem.
2. Zapnout: Operate the light using the wall switch connected to the fixture. The panel will illuminate with 4000K cool white light.

6.2 Emergency Battery Backup Function

The integrated emergency battery backup provides illumination during power outages.

• Upon loss of normal AC power, the panel will automatically switch to battery power, providing reduced lumen output for a specified duration (typically 90 minutes).
• The battery charges automatically when AC power is present.

6.3 Testing the Emergency Function

Regular testing is crucial to ensure the emergency battery backup is functioning correctly.

1. Monthly Test (30 seconds): Press and hold the test button (if present, typically a small button on the side of the fixture or driver housing) for 30 seconds. The light should switch to emergency mode. Release the button; the light should return to normal operation.
2. Annual Test (90 minutes): Once a year, perform a full discharge test. Turn off the AC power to the fixture for 90 minutes. The light should remain illuminated in emergency mode for the entire duration. Restore AC power after the test.
3. Kontrolka: A small LED indicator light (if present) typically shows the battery status: green for charged, red for charging or fault. Consult the specific driver instructions for detailed indicator meanings.

7. Údržba

The LEDVANCE Sylvania LED panel light requires minimal maintenance.

• Čištění: Ensure power is off before cleaning. Wipe the surface of the panel with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo optické součásti.
• Inspekce: Periodically inspect the fixture for any signs of damage, loose wiring, or wear.
• LED diody: The integrated LEDs are designed for long life and are not user-replaceable.
• Výměna baterie: The emergency battery has a finite lifespan. If the unit fails the annual 90-minute test, the battery may need replacement. Contact qualified service personnel for battery replacement.

8. Řešení problémů

Before attempting any troubleshooting, ensure power is disconnected at the circuit breaker.

9. Záruka a podpora

Informace o záruce: For warranty details, please refer to the documentation included with your product or visit the official LEDVANCE Sylvania website. The product is typically covered by a manufacturer's warranty against defects in materials and workmanship.

Zákaznická podpora: For technical assistance, troubleshooting, or warranty claims, please contact LEDVANCE Sylvania customer service:

• Phone (US & Canadian Customers): 1-800-LIGHTBULB (1-800-544-4828)
• Webmísto: www.ledvanceus.com (nebo příslušné regionální webweb)

Při kontaktování podpory mějte prosím k dispozici číslo modelu (74246) a datum zakoupení.