Nebeská zmije 00

Sky Viper Drone Battery USB Charger Instruction Manual

For Models: s670, v950HD, v950STR, s1700, V2400HD, v245GPS

Zavedení

This manual provides essential instructions for the safe and effective use of your Sky Viper Drone Battery USB Charger. Please read this manual thoroughly before operating the charger to ensure proper function and longevity of your drone batteries.

Two Sky Viper USB drone battery chargers

Image: A set of two black USB chargers for Sky Viper drone batteries, each with a USB-A plug on one end and a small two-pin connector on the other, connected by a black cable.

Nastavení

Follow these steps to prepare your USB charger for use:

  1. Rozbalit: Carefully remove the USB charger from its packaging.
  2. Kontrolovat: Zkontrolujte nabíječku, zda není viditelně poškozená. Pokud je poškozená, nepoužívejte ji.
  3. Zdroj napájení: Connect the USB-A plug of the charger to a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank). Ensure the power source provides a stable 5V output.
  4. Kontrolka: Once connected to a power source, the charger's indicator light (if present) may illuminate, indicating it is ready for use.
Strana view of a single Sky Viper USB drone battery charger

Image: A single black USB charger shown from the side, highlighting the USB-A connector and the small drone battery connector.

Video: This video demonstrates the Sky Viper USB charger, showing its components and how it can be handled. It highlights the USB-A connector and the drone battery connector.

Návod k obsluze

To charge your Sky Viper drone battery:

  1. Připojte baterii: Carefully align the two-pin connector of the charger with the corresponding port on your Sky Viper drone battery. Gently push to ensure a secure connection. Do not force the connection.
  2. Indikátor nabíjení: The charger's indicator light will typically change color or state to indicate that charging is in progress. Refer to your specific drone battery's manual for details on its charging status indicators.
  3. Doba nabíjení: Charging times may vary depending on the battery's capacity and its current charge level. Avoid overcharging. Disconnect the battery once fully charged.
  4. Odpojit: Once charging is complete, carefully disconnect the battery from the charger, then disconnect the charger from the USB power source.
Close-up of the two-pin connector on the Sky Viper USB charger

Obrázek: Detailní záběr view of the small two-pin connector on the charger cable, which connects to the drone battery.

Sky Viper USB charger next to a Sky Viper drone

Image: The USB charger is displayed alongside a Sky Viper drone, illustrating the product's intended use and compatibility.

Údržba

Pro zajištění dlouhé životnosti a správné funkce nabíječky:

Odstraňování problémů

ProblémMožná příčinaŘešení
Kontrolka nabíječky se nerozsvítí.No power from USB source, faulty USB port, or damaged charger.Try a different USB power source or port. Ensure the USB plug is fully inserted. If the issue persists, the charger may be faulty.
Baterie se nenabíjí.Loose battery connection, incompatible battery, or battery fault.Ensure the battery connector is securely attached to the charger. Verify the battery is compatible with this charger. Test with a different battery if available.
Pomalé nabíjení.Low power USB source.Use a USB power source with higher output (e.g., a wall adapter instead of a computer port).

Specifikace

Note: The "Input Voltage: 240 Volts" specification likely refers to the AC input for a compatible wall adapter, as USB power sources typically provide 5V DC. The charger itself is designed to accept 5V DC from a USB port.

Záruka a podpora

For warranty information and customer support, please refer to the official Sky Viper website or contact the retailer where the product was purchased. Specific warranty terms and support contact details are not provided in this manual.

Související dokumenty - 00

Předview Průvodce létáním s kaskadérským dronem Sky Viper 01599
Komplexní průvodce létáním s dronem Sky Viper 01599 Stunt Drone, který zahrnuje nastavení, ovládání letu, základní manévry, pokročilé kaskadérské kousky, řešení problémů, péči o baterii a bezpečnostní opatření.
Předview Uživatelská příručka k závodnímu dronu Sky Viper Type R
Komplexní průvodce provozem závodního dronu Sky Viper Type R Performance Racing Drone, včetně nastavení, ovládacích prvků letu, letových režimů, řešení problémů a bezpečnostních opatření.
Předview Dron Sky Viper Dash Nano: Průvodce nastavením, letem a bezpečností
Komplexní průvodce nastavením, létáním a údržbou dronu Sky Viper Dash Nano. Seznamte se s letovými režimy, ovládáním, kaskadérskými kousky, péčí o baterii a bezpečnostními opatřeními.
Předview Uživatelská příručka a průvodce k dronu Sky Viper Nova FX Light Display
Komplexní uživatelská příručka pro dron Sky Viper Nova FX Light Display Drone, která zahrnuje nastavení, ovládání letu, barevné morfingové rotory, kaskadérské kousky, řešení problémů a bezpečnostní opatření.
Předview Návod k obsluze dronu Sky Viper M200 Nano
Tato instruktážní příručka poskytuje podrobné informace o obsluze dronu Sky Viper M200 Nano Drone, včetně nastavení, nabíjení, ovládání letu, bezpečnostních opatření, kaskadérských kousků, údržby a řešení problémů. Naučte se, jak bezpečně a efektivně létat s dronem.
Předview Streamované video Sky Viper: Průvodce létáním s dronem Spider-Drone
Komplexní průvodce létáním s dronem Sky Viper Streaming Video Spider-Drone, který zahrnuje nastavení, ovládání letu, manévry, nahrávání, nabíjení a bezpečnostní opatření. Naučte se, jak bezpečně a efektivně ovládat svůj dron.