Pabobo by Angelcare LumiBlo Night Light Lantern

Zavedení

The Pabobo by Angelcare LumiBlo is an innovative and user-friendly night light lantern designed to provide comfort and light for children. Its unique blow-control feature allows for intuitive operation, making it a fun and reassuring companion for your little one. This manual provides essential information on setting up, operating, maintaining, and troubleshooting your LumiBlo lantern.

Klíčové vlastnosti:

• Magic Blow Control: Turn on, off, and adjust light intensity with a simple blow.
• Nabíjecí: Economical and convenient with a micro-USB charging port.
• Dlouhá autonomie: Up to a week of use (24 x 1-hour cycles) on a single charge.
• Režim časovače: Automatically turns off after one hour (default setting).
• Přenosný design: Tactile and easy to carry with a practical handle for clipping.
• Trezor: Stays cool to the touch.

Bezpečnostní informace

Please read and understand all safety instructions before using the LumiBlo Night Light Lantern. Failure to follow these instructions may result in injury or damage to the product.

• Tento výrobek je určen pouze pro vnitřní použití.
• Chraňte před vodou a nadměrnou vlhkostí.
• Nepokoušejte se zařízení rozebírat nebo upravovat.
• Use only the provided micro-USB cable for charging.
• Před připojením kabelu se ujistěte, že je nabíjecí port suchý.
• Keep out of reach of very young children during charging to prevent entanglement with the cable.

Obsah balení

• Pabobo by Angelcare LumiBlo Night Light Lantern
• Micro-USB nabíjecí kabel
• Uživatelská příručka (tento dokument)

Začínáme (Nastavení)

Počáteční nabíjení

Before first use, it is recommended to fully charge your LumiBlo lantern for approximately 12 hours. This ensures optimal battery performance and longevity.

1. Locate the micro-USB charging port on the base of the LumiBlo lantern.
2. Connect the provided micro-USB cable to the lantern's charging port.
3. Zapojte druhý konec kabelu USB do kompatibilního napájecího adaptéru USB (není součástí balení) nebo do portu USB počítače.
4. The light will indicate charging status (e.g., a small light near the port may glow).
5. Po úplném nabití odpojte kabel.

Image: The base of the LumiBlo lantern, highlighting the micro-USB charging port and the power button for manual control.

První použití

After charging, your LumiBlo is ready for use. You can activate it using either the blow sensor or the manual button.

Operace

Blow Control (Magic Mode)

The LumiBlo lantern features a unique blow sensor, typically located near the star-shaped indentation at its base. This allows for intuitive control without pressing buttons.

1. Zapnout: Blow a short, gentle puff of air into the star-shaped sensor. The lantern will illuminate.
2. Nastavení intenzity: Once on, blow a long, continuous puff of air into the sensor. The light intensity will gradually increase or decrease. Release your breath when the desired brightness is reached.
3. Vypnout: Blow another short, gentle puff of air into the sensor. The lantern will turn off.

Obrázek: Podrobný view of the LumiBlo lantern's base, highlighting the star-shaped blow sensor for interactive control.

Manuální ovládání tlačítkem

For situations where blow control is not convenient, the LumiBlo can also be operated using the button located on its base, next to the charging port.

• Zapnutí/vypnutí: Press the button briefly to toggle the light on or off.
• Continuous Light Mode: Press and hold the button for approximately 3 seconds. The lantern will enter continuous light mode and remain on until manually turned off or the battery depletes. This overrides the 1-hour timer.

Režim časovače

By default, the LumiBlo lantern operates in a timer mode. When activated (either by blowing or a short button press), the light will automatically turn off after one hour to conserve battery life.

• To deactivate the timer and enable continuous light, use the manual button control as described above.

Přenositelnost a umístění

The LumiBlo's design makes it highly portable and versatile for placement.

• The integrated handle allows for easy carrying by children.
• The handle can also be used to clip the lantern to a door handle, crib rail, or even a belt for hands-free illumination.

Image: A child confidently holding the LumiBlo lantern, demonstrating its portability and ease of use for navigating in the dark.

Image: The LumiBlo lantern conveniently hanging on a crib rail, illustrating its versatile placement options in a nursery setting.

Péče a údržba

Čištění

To clean your LumiBlo lantern, simply wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.

Péče o baterie

• Recharge the lantern when the light appears dim or does not turn on.
• Abyste prodloužili životnost baterie, vyhněte se častému úplnému vybíjení.
• If storing the lantern for an extended period, charge it periodically (e.g., every 3-6 months) to maintain battery health.

Odstraňování problémů

Specifikace

Záruka a podpora

Pabobo products are designed for durability and reliability. For any questions, technical support, or warranty claims, please contact the manufacturer's customer service. Keep your proof of purchase for warranty purposes.

For further assistance, please refer to the official Pabobo webwebu nebo kontaktujte jejich zákaznickou podporu.