1. Úvod
This manual provides essential instructions for the setup, operation, and maintenance of your Antminer D3 19.3 GH/s X11 ASIC Dash Miner. Please read this document thoroughly before operating the device to ensure proper functionality and safety.
Figure 1: Antminer D3 19.3 GH/s X11 ASIC Dash Miner, front view.
2. Specifikace
| Hash Rate | 19.3 GH/s (±5% variation expected) |
| Spotřeba energie | 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp). Power consumption figures vary with PSU efficiency, ambient operating temperature, and power meter accuracy. |
| Rozměry | 12.6 x 5.12 x 7.5 palce |
| Hashing Algorithm | X11 |
| Compatible Coins | DASH, ADZ, ARC, ATX, BOLI, BOPS, BSC, CANN, CNO, CNT, COXST, CREVA, CRM, DP, ENT, ERY, FAL, GILL, GRN, HCC, HPC, INFX, J-x11, KASH, KURT, LGBTQ, LKC, MAR, MARX, MMM, MND, MUE, OGN, ONX, OZC, PIZZA, PXI, SAND, SEV, SMC, START, TOR, TREAU, UIS-x11, VLTC, XCXT, XVP |
| Doporučený PSU | APW3++ PSU (not included). One APW3++ PSU cannot power more than one Antminer D3. |
| Hmotnost položky | 5 libry |
| Hardwarová platforma | Linux |
| Operační systém | Linux |
Figure 2: Visual representation of Antminer D3 specifications, including hash rate, power consumption, and dimensions.
3. Pokyny k nastavení
Follow these steps to properly set up your Antminer D3:
- Připojení napájení: Ensure you have a compatible power supply unit (PSU), such as the Bitmain APW3++. Connect the AC cable to the PSU adapter input.
- Hashing Board Connections: All PCIe connectors on each hashing board must be connected to the PSU. Varování: Do not connect more than one PSU to the same hashing board.
- Control Board Connection: Locate the additional 6-pin PCIe connector on the I/O board and connect it to the PSU.
- Sekvence zapnutí: Only power on the miner after all PCIe connectors (for both hashing boards and the control board) are securely connected to the power supply.
Obrázek 3: View of the Antminer D3's internal components, showing the hashing boards and PCIe power connectors. Ensure all connectors are properly seated.
Obrázek 4: Přední a zadní část views of the Antminer D3, highlighting the fan and port locations for proper setup.
4. Provoz
Once the Antminer D3 is properly connected to power, it will initiate. The device operates using the X11 hashing algorithm to mine compatible cryptocurrencies such as Dash. Configuration details for mining pools and network settings are typically accessed via a web interface once the device is powered on and connected to your network. Refer to the specific software documentation for detailed configuration steps.
5. Údržba
- Odstranění prachu: Regularly clean the fans and heatsinks to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air or a soft brush.
- Kontrola prostředí: Operate the miner in a cool, dry, and well-ventilated environment to maintain optimal operating temperatures and efficiency.
- Kontrola kabelů: Periodically inspect all power and data cables for any signs of wear or damage. Replace any compromised cables immediately.
6. Řešení problémů
- Těžební zařízení se nezapíná: Verify all power cables are securely connected to the PSU, hashing boards, and control board. Ensure the PSU is receiving power from the wall outlet.
- Nízká hashovací rychlost: Check network connectivity and mining pool settings. Ensure the ambient temperature is within the recommended range. Clean any dust from fans and heatsinks.
- Excessive Noise/Heat: This device is known to be very loud. Ensure proper ventilation and that fans are operating correctly. High temperatures can indicate insufficient cooling or dust buildup.
7. Bezpečnostní informace
- Hlasitý provoz: The Antminer D3 is very loud during operation. Prolonged exposure to high noise levels can be harmful. Consider using hearing protection or placing the miner in a sound-insulated area.
- Vysoká spotřeba energie: This device requires a 1200W power source. Ensure your electrical infrastructure can safely support this load to prevent electrical hazards.
- Výroba tepla: The miner generates significant heat. Ensure adequate ventilation to prevent overheating and potential fire hazards. Do not obstruct air vents.
- Elektrická bezpečnost: Always disconnect power before performing any maintenance or inspection. Do not operate the device with damaged cables or components.
8. Záruka a podpora
For warranty-related issues, please contact Bitmain directly. The seller does not handle returns or refunds for this product. It is important to note that the shipping address cannot be changed after an order has been submitted. The seller is not responsible for downtime caused by transportation delays due to customs formalities or other reasons.