VIVO STAND-V102F Dual Monitor Free-Standing Desk Mount

1. Úvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your VIVO STAND-V102F Dual Monitor Free-Standing Desk Mount. This mount is designed to hold two flat or curved display screens ranging from 13 to 30 inches, with a maximum weight capacity of 17.6 lbs per screen. It supports VESA mounting patterns of 75x75mm or 100x100mm.

Bezpečnostní upozornění:

• Před použitím se ujistěte, že jsou všechny součásti bezpečně upevněny.
• Do not exceed the maximum weight capacity of 17.6 lbs per screen.
• Avoid pulling monitors too far forward or backward unless the stand is bolted down, as this may compromise stability.
• Always check that the base size fits your available desk space to prevent tipping.

2. Obsah balení

Please verify that all components listed below are present in your package. If any parts are missing or damaged, contact VIVO customer support.

• Heavy-Duty Base (11" x 15.4")
• Center Pole (16.4" height)
• Dual Monitor Arms with VESA Plates
• Klipy pro správu kabelů
• All necessary hardware (screws, washers, Allen keys)

3. Montážní návod

Follow these steps to assemble your VIVO Dual Monitor Free-Standing Desk Mount.

1. Attach the Center Pole to the Base: Securely fasten the center pole to the heavy-duty base using the provided screws and Allen key. Ensure it is stable.
2. Install Monitor Arms: Slide the dual monitor arms onto the center pole. Adjust their height to your preference and tighten the locking mechanism.
3. Připevnění desek VESA k monitorům: Remove the VESA plates from the monitor arms. Attach these plates to the back of your monitors using the appropriate screws for your monitor's VESA pattern (75x75mm or 100x100mm).
4. Montáž monitorů: Carefully slide the monitors (with attached VESA plates) onto the monitor arms. Ensure they click securely into place.
5. Správa kabelů: Utilize the included cable management clips to route and organize your monitor cables along the arms and down the center pole for a tidy setup.

Figure 1: Assembled VIVO Dual Monitor Free-Standing Desk Mount with monitors.

Figure 2: Detail of VESA plate for monitor attachment.

4. Návod k obsluze

The VIVO STAND-V102F offers full articulation for optimal viewing úhly.

• Nastavení výšky: Uvolněte třamp on the center pole to slide the monitor arms up or down. Re-tighten the clamp firmly once the desired height is achieved.
• Nastavení sklonu: Monitors can be tilted +45° to -45°. Adjust the tilt knob on the VESA plate to achieve your preferred vertical viewúhel.
• Nastavení otáčení: The monitor arms allow for 180° swivel, enabling you to adjust the horizontal angle of each monitor independently.
• Otáčení: Monitors can be rotated 360° for portrait or landscape orientation. Simply turn the monitor to the desired orientation.
• Artikulace paže: The double center arm joints provide additional articulation, allowing for flexible monitor placement and positioning.

Figure 3: Full articulation features including tilt, swivel, and rotation.

Obrázek 4: Přample of monitors in both portrait and landscape orientations.

5. Vlastnosti

• Univerzální kompatibilita: Fits two screens from 13" to 30" and up to 17.6 lbs each. Supports VESA 75x75mm or 100x100mm mounting patterns.
• Plná artikulace: Offers +45° to -45° tilt, 180° swivel, and 360° rotation for flexible viewIng.
• Nastavení výšky: Monitors can be adjusted along the 16.4" center pole.
• Heavy-Duty Base: A solid steel 11" x 15.4" base ensures stability for your monitor setup.
• Integrovaná správa kabelů: Clips are included to keep cables organized and out of sight.

Figure 5: Key dimensions and compatibility information.

Figure 6: The heavy-duty base providing stability.

Obrázek 7: Integrovaný systém správy kabelů.

6. Specifikace

7. Údržba

Abyste zajistili dlouhou životnost a optimální výkon držáku monitoru VIVO, dodržujte tyto pokyny pro údržbu:

• Pravidelný úklid: Otřete držák měkkým hadříkemamp cloth to remove dust and debris. Avoid abrasive cleaners or solvents.
• Zkontrolujte spojovací prvky: Pravidelně kontrolujte všechny šrouby a vruty, abyste se ujistili, že jsou pevně utažené. V případě potřeby je dotáhněte pro zachování stability.
• Mazání: If any joints become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.

8. Řešení problémů

Pokud narazíte na jakékoli problémy s držákem monitoru, podívejte se na následující běžné problémy a jejich řešení:

• Mount is Unstable/Tipping:
  • Ensure the heavy-duty base is fully on a flat, stable surface.
  • Verify that the combined weight of your monitors does not exceed the maximum capacity.
  • Avoid extending monitors too far forward or backward from the center pole without securing the base to the desk (if applicable).
• Monitors Sagging/Not Holding Position:
  • Tighten the tilt adjustment knob on the VESA plate.
  • Ensure all arm joints are securely tightened with the provided Allen key.
• Difficulty Adjusting Tilt:
  • Some tilt bolts may require a specific Allen key or tool for proper tightening/loosening. Refer to the assembly diagram for exact locations.
  • Ensure the monitor is not exceeding the weight limit, which can make adjustments difficult.

9. Oficiální produktová videa

10. Záruka a podpora

VIVO products are backed by a manufacturer's warranty. For specific warranty details, product registration, or technical support, please visit the official VIVO webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

VIVO is a US-based company committed to providing quality ergonomic solutions. Their sales and technical support teams are available to assist with any product-related inquiries.

Figure 8: VIVO's commitment to customer support.