Zavedení
The Weiser Phoenix Venetian Bronze Passage Door Knob is designed for interior doors that do not require a locking mechanism. This includes applications such as hallway doors and closet doors. Its traditional design and Venetian Bronze finish complement various home décors. The knob is reversible, allowing installation on both left-handed and right-handed doors.
Image: Weiser Phoenix Venetian Bronze Passage Door Knob, showcasing its traditional design and finish.
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- 1 Set of Door Knobs (Interior and Exterior)
- 1 Latch mechanism
- 1 Strike plate
- Montážní šrouby
- Instalační manuál
Specifikace dveří
Ensure your door meets the following specifications for proper fit and function:
- Tloušťka dveří: 1-3/8 inches to 1-3/4 inches (35mm - 44mm)
- Latch Backset: Adjustable for 2-3/8 inches or 2-3/4 inches (60mm or 70mm)
- Křížový otvor: 2-1/8 palce (54 mm)
Nastavení a instalace
Installation of the Weiser Phoenix Passage Door Knob is designed to be straightforward and can typically be completed with a screwdriver.
- Připravte dveře: Ensure the door has the correct bore holes and backset. If replacing an existing knob, remove the old hardware.
- Nainstalujte západku: Insert the latch mechanism into the edge bore hole of the door. Ensure the latch bolt faces the door frame. Secure it with the provided screws. The latch is adjustable to fit either a 2-3/8 inch or 2-3/4 inch backset.
- Install the Exterior Knob: Place the exterior knob assembly through the 2-1/8 inch cross bore hole, ensuring the spindle aligns with the latch mechanism.
- Nainstalujte vnitřní knoflík: Position the interior knob assembly over the spindle and align the mounting posts with the holes on the exterior assembly.
- Secure the Knobs: Fasten the interior and exterior knob assemblies together using the provided screws. Tighten securely, but do not overtighten, to ensure smooth operation.
- Instalace protikusu: Attach the strike plate to the door frame, aligning it with the latch bolt. Secure with screws.
- Testovací provoz: Open and close the door several times, turning the knobs to ensure the latch retracts and extends smoothly without binding.
Návod k obsluze
The Weiser Phoenix Passage Door Knob is a non-locking mechanism designed for easy access. To open a door equipped with this knob:
- Grasp either the interior or exterior knob.
- Turn the knob in either direction (clockwise or counter-clockwise).
- Push or pull the door open.
The latch will retract when the knob is turned and extend automatically when the door is closed, holding the door in place without locking it.
Péče a údržba
To maintain the appearance and functionality of your Weiser Phoenix Door Knob, follow these guidelines:
- Čištění: Clean the knob with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie, protože by mohly poškodit povrchovou úpravu.
- Mazání: If the latch mechanism becomes stiff over time, a small amount of silicone-based lubricant can be applied to the latch bolt. Do not use oil-based lubricants, as they can attract dust and debris.
- Utahování: Periodically check the mounting screws for tightness. If the knobs feel loose, gently tighten the screws to ensure secure attachment.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Knoflík je uvolněný nebo se kymácí. | Upevňovací šrouby jsou uvolněné. | Tighten the mounting screws connecting the interior and exterior knob assemblies. |
| Západka se nezasouvá hladce. | Debris in the latch mechanism or lack of lubrication. | Clean the latch mechanism. Apply a small amount of silicone-based lubricant to the latch bolt. |
| Door does not close properly or rattles. | Strike plate misalignment. | Adjust the position of the strike plate on the door frame to ensure proper alignment with the latch bolt. |
| Knoflík se obtížně otáčí. | Over-tightened mounting screws or misaligned components. | Loosen mounting screws slightly and re-test. Ensure all components are correctly aligned during installation. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Weiser |
| Číslo modelu | 9GA1010-015 |
| Styl | Hall/Closet (Passage) |
| Barva | Benátský bronz |
| Dokončit | Kartáčovaný |
| Tvar | Kolo |
| Typ rukojeti | Knoflík |
| Typ zámku | Žádný zámek |
| Kompatibilita tloušťky dveří | 1-3/8" - 1-3/4" |
| Západka Backset | Adjustable 2-3/8" - 2-3/4" |
| Křížový otvor | 2-1/8" |
| Hmotnost položky | 480 g |
| Rozměry produktu | 11.58 x 7.59 x 7.59 cm |
| Speciální funkce | Snadná instalace |
Informace o záruce
This Weiser product comes with a 30denní záruka. For specific details regarding mechanical and finish warranties, please refer to the documentation included with your purchase or visit the official Weiser webmísto.
Zákaznická podpora
For further assistance, technical support, or warranty claims, please contact Weiser customer service. You can find contact information and additional resources on the official Weiser webmísto:
Visit Weiser's Official Webmísto
Please have your model number (9GA1010-015) and purchase information ready when contacting support.
