1. Konec produktuview
The Weiser Powerbolt 2 is a keyless entry deadbolt lock designed for convenient and secure access. It features a keypad for personalized access codes, motorized locking, and SmartKey re-key technology. This single cylinder deadbolt can be operated using the keypad or a traditional key from the outside, and a turn button from the inside. The Satin Chrome finish provides a modern aesthetic.
2. Nastavení a instalace
2.1 Obsah balení
Před zahájením instalace se ujistěte, že jsou přítomny všechny komponenty:
- Interior and Exterior Assembly Units
- Vnitřní kryt
- Vjezdový límec
- 4 AA Batteries (not always included, check packaging)
- Montážní deska
- Západka
- Úderová deska
- Šrouby
- 2 kláves
- Nástroj SmartKey
- Návod k použití
2.2 Door Preparation and Installation
The Powerbolt 2 is designed for easy installation with a standard screwdriver. Ensure your door meets the following specifications:
- Bore Hole: 2 1/8 palce (54 mm)
- Tloušťka dveří: 1 3/8 inches to 1 3/4 inches (35 mm - 44 mm)
Follow the detailed instructions provided in the included manual for step-by-step installation. This typically involves installing the latch, exterior keypad assembly, interior mounting plate, and interior assembly.
2.3 Instalace baterie
The lock operates on 4 AA batteries. Install these into the interior assembly unit as directed in the manual. Ensure correct polarity. The lock will indicate low battery status when replacement is needed.
2.4 SmartKey Re-key Technology
The SmartKey feature allows you to re-key your lock to work with an existing key from another Weiser SmartKey lock. This process can be completed in seconds using the provided SmartKey tool.
- Vložte funkční klíč do válce a otočte jím o 90 stupňů ve směru hodinových ručiček.
- Zasuňte nástroj SmartKey zcela a pevně do otvoru SmartKey.
- Odstraňte nástroj SmartKey.
- Vyjměte funkční klíč.
- Insert your new key fully and firmly into the cylinder.
- Otočte nový klíč o 180 stupňů proti směru hodinových ručiček.
- Vyjměte nový klíč. Zámek je nyní znovu zakódován.
3. Návod k obsluze
3.1 Programování přístupových kódů
The Powerbolt 2 supports up to 6 user access codes, 1 master code, and 1 temporary code. Refer to your specific manual for detailed programming steps, as these can vary slightly.
Důležité: The master code is used for programming and managing other codes, not typically for daily entry. User codes are your primary entry codes.
3.2 Bezklíčový vstup
To unlock the door using the keypad:
- Enter your personalized user access code.
- The deadbolt will retract, allowing you to open the door.
3.3 One-Touch Motorized Locking
To lock the door from the outside:
- Press the lock button on the keypad. The deadbolt will extend automatically.
To lock the door from the inside:
- Rotate the turn button on the interior assembly.
3.4 Automatic Door Locking (Auto-Lock)
The Powerbolt 2 features a togglable automatic door locking function. When enabled, the deadbolt will automatically extend 30 seconds after being unlocked. This feature can be configured or disabled through the programming steps outlined in your manual.
3.5 Backlit Keypad
The keypad is backlit for improved visibility in low-light conditions. The backlight activates when any button is pressed and remains lit for 30 seconds after inactivity.
4. Údržba
4.1 Výměna baterie
When the batteries are low, the lock will provide an indication (e.g., a series of beeps or a flashing light). To replace the batteries:
- Sejměte vnitřní kryt.
- Carefully remove the old AA batteries.
- Vložte 4 nové alkalické baterie typu AA a dbejte na správnou polaritu.
- Vyměňte vnitřní kryt.
It is recommended to use high-quality alkaline batteries for optimal performance and battery life.
4.2 Obecná péče
Klávesnici a vnější povrchy čistěte měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu a elektronické součástky.
5. Řešení problémů
- Zámek nereaguje: Check battery levels. Replace batteries if necessary. Ensure the interior cable is securely connected.
- Klávesnice se nerozsvítí: This may indicate low batteries or a connection issue. Replace batteries first.
- Zámek se nezapíná/nezapíná: Ensure the deadbolt is properly aligned with the strike plate on the door frame. Check for any obstructions.
- Problémy s programováním: Double-check the programming steps in your manual. Ensure you are distinguishing between the master code (for programming) and user codes (for entry). If issues persist, perform a factory reset (refer to your manual for instructions) and reprogram all codes.
- Indikace slabé baterie: If the lock emits a series of beeps or a flashing light, replace the 4 AA batteries promptly.
6. Specifikace produktu
| Funkce | Detail |
|---|---|
| Výrobce | Weiser |
| Číslo modelu | 9GED14600-104 |
| Rozměry produktu | 6.99 x 12.07 x 4.92 cm |
| Hmotnost položky | 1.09 kg |
| Barva | Satin Chrome |
| Styl | Powerbolt 2 |
| Dokončit | Satin Chrome |
| Materiál | Kov |
| Zdroj napájení | Napájení bateriemi (vyžadují 4 baterie AA) |
| Způsob instalace | Vestavěný |
| Speciální funkce | Auto-Lock, Back-Lit Keypad, Low Battery Indication, Motorized Locking, SmartKey |
| Typ zámku | Klávesnice |
| Doporučená použití | Exterior Entry Door, Garage Door, Office Door, Shed Door |
| Tloušťka dveří | 1 3/8" - 1 3/4" |
| Otvor | 2 1/8" |
7. Informace o záruce
The Weiser Powerbolt 2 Keyless Entry Deadbolt Lock comes with a Omezená doživotní záruka. For specific details regarding coverage, terms, and conditions, please refer to the warranty documentation included with your product or visit the official Weiser webmísto.
8. Podpora a kontakt
For further assistance, technical support, or to inquire about replacement parts, please contact Weiser customer service. Contact information can typically be found on the official Weiser webmístě nebo na obalu produktu.
Online zdroje: Visit the official Weiser website for FAQs, additional guides, and product registration.
