Zavedení
The Samson DK707 is a comprehensive 7-piece drum microphone kit designed to provide high-quality audio capture for drum sets in both live performance and recording environments. This kit includes specialized microphones for kick drums, snare drums, toms, and overhead applications, ensuring a full-range sound reproduction. This manual provides essential information for the proper setup, operation, and maintenance of your DK707 kit.
Obsah sady
The Samson DK707 kit includes the following components:
- 1x Q71 Kick Drum Microphone
- 4x Q72 Instrument Microphones (for snare and toms)
- 2x C02 Pencil Condenser Microphones (for overheads)
- 7x Swivel-style Mic Adapters
- 4x Tension-mounted Rim Clips
- 1x Deluxe Hardshell Carry Case
- 7x XLR Mic Cables



Microphone Descriptions
Q71 Kick Drum Microphone
The Q71 is a dynamic microphone specifically engineered to capture the low-frequency impact and full essence of a kick drum. Its high SPL handling ensures clear, undistorted sound even at extreme volumes.
- Typ: Dynamic, supercardioid pattern
- Frekvenční odezva: 50Hz–16kHz
- Max SPL: Až 147 dB

Q72 Instrument Microphones
The four Q72 microphones are dynamic instrument microphones optimized for snare drums and toms. They are designed to reproduce the natural tone and attack of these instruments with clarity and precision.
- Typ: Dynamic, supercardioid pattern
- Frekvenční odezva: 50Hz–16kHz
- Max SPL: Až 147 dB

C02 Pencil Condenser Microphones
The two C02 microphones are pencil condenser microphones ideal for overhead and ambient miking applications. Their sensitive response captures the overall sound of the drum kit and room acoustics.
- Typ: Condenser, cardioid pickup pattern
- Max SPL: Až 134 dB
- Konektory: Pozlacené XLR

Pokyny pro nastavení
Follow these steps to set up your Samson DK707 drum microphone kit:
- Rozbalte sadu: Carefully remove all microphones, cables, adapters, and rim clips from the hardshell carry case.
- Attach Mic Adapters: Screw the swivel-style mic adapters onto the base of each microphone.
- Position Q71 (Kick Drum): Place the Q71 microphone on a sturdy microphone stand (not included) and position it near the kick drum's resonant head or inside the drum for a punchier sound.
- Attach Q72 (Snare/Toms): Use the tension-mounted rim clips to attach the Q72 microphones to the rims of your snare drum and tom-toms. Adjust the angle using the swivel adapter to point the microphone towards the center of the drum head for optimal sound capture.
- Position C02 (Overheads): Mount the C02 pencil condenser microphones on overhead boom stands (not included). Position them above the drum kit, typically in an X/Y or spaced pair configuration, to capture the overall sound of the cymbals and the entire kit.
- Připojit kabely: Use the provided XLR cables to connect each microphone to your audio interface, mixer, or snake. Ensure all connections are secure.
- Správa kabelů: Route cables neatly to prevent tripping hazards and reduce interference.
Provozní směrnice
Once your microphones are set up, consider the following for optimal performance:
- Ziskytaging: Adjust the gain on your mixer or interface for each microphone to achieve a strong signal without clipping. Start with lower gain and gradually increase.
- Fantomová síla: The C02 condenser microphones require +48V phantom power to operate. Ensure this is enabled on the corresponding channels of your mixer or interface. The Q71 and Q72 dynamic microphones do not require phantom power.
- Umístění mikrofonu: Experiment with microphone positions to find the best sound for your specific drum kit and room acoustics. Small adjustments can significantly impact the sound.
- Sledování: Use headphones or studio monitors to listen to the microphone signals and make necessary adjustments to placement, EQ, and compression.
Údržba
Proper maintenance will extend the life and performance of your DK707 kit:
- Čištění: Use a soft, dry cloth to wipe down microphones after each use. Avoid using harsh chemicals or abrasive materials. For microphone grilles, a soft brush can remove dust or debris.
- Skladování: Always store the microphones and accessories in the provided hardshell carry case when not in use. This protects them from dust, moisture, and physical damage.
- Péče o kabely: Coil cables loosely and avoid sharp bends or kinks to prevent internal damage.
- Podmínky prostředí: Avoid exposing microphones to extreme temperatures, high humidity, or direct sunlight.
Odstraňování problémů
If you encounter issues with your DK707 kit, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| No sound from C02 condenser mics | Phantom power not enabled | Ensure +48V phantom power is activated on the mixer/interface channel for the C02 mics. |
| No sound from any mic | Vadný kabel nebo připojení | Check all XLR cable connections. Try swapping cables to identify a faulty one. Ensure mixer/interface input is selected and gain is up. |
| Distorted or clipped sound | Vstupní zesílení je příliš vysoké | Reduce the input gain on your mixer or audio interface until the signal is clean. |
| Weak or low signal | Input gain too low or incorrect mic placement | Increase the input gain. Adjust microphone proximity to the sound source. |
| Přílišná zpětná vazba | Microphone too close to speakers or poor room acoustics | Reposition microphones further from speakers. Reduce monitor volume. Use EQ to cut problematic frequencies. |
Specifikace
Key technical specifications for the Samson DK707 kit:
| Funkce | Detail |
|---|---|
| Microphone Types | 1x Q71 (Dynamic), 4x Q72 (Dynamic), 2x C02 (Condenser) |
| Polární vzory | Q71/Q72: Supercardioid, C02: Cardioid |
| Q71/Q72 Frequency Response | 50Hz–16kHz |
| Q71/Q72 Max SPL | 147 dB |
| C02 Max SPL | 134 dB |
| C02 Power Requirement | +48V fantomové napájení |
| Konektivita | XLR |
| Zahrnuté příslušenství | Mic Adapters, Rim Clips, Hardshell Carry Case, XLR Cables |
| Hmotnost položky | 11.51 liber (celková sada) |
| Rozměry produktu | 12.8 x 16 x 10.3 palce (pouzdro) |
Záruka a podpora
The Samson DK707 Drum Mic 7-Piece Kit is covered by a Samson 2 Year Warranty. For warranty claims or technical support, please refer to the warranty card included in your kit or visit the official Samson website for contact information and service details.





