Uživatelská příručka k Bluetooth komunikačnímu systému pro motocykly Sena 20S EVO

1. Úvod

The Sena 20S EVO is a state-of-the-art Bluetooth communication system designed for motorcycle riders. It offers enhanced intercom stability and extended communication range, ensuring robust performance for various riding scenarios. This system integrates seamlessly with your helmet, providing hands-free communication, music playback, FM radio, and voice command capabilities.

Figure 1.1: Sena 20S EVO Main Module

2. Obsah balení

Your Sena 20S EVO package typically includes the following components:

• Sena 20S EVO Main Module
• Univerzální helma Clamp Kit (with boom microphone and wired microphone options)
• Speakers (40mm driver unit)
• Speaker Foam Spacers
• Kryty reproduktorů
• Adhesive Rubber Spacers
• Adhezivní držák
• Velcro Pads for Speakers and Microphone
• Šestihranný klíč
• USB Charging & Data Cable

3. Nastavení a instalace

Proper installation is crucial for optimal performance and comfort. Follow these steps to install your Sena 20S EVO on your motorcycle helmet.

3.1. Choosing and Attaching the Microphone

1. Decide which microphone type (boom or wired) is best suited for your helmet type (e.g., boom for open-face, wired for full-face).
2. To change microphones, use the provided hex wrench to unscrew the back plate of the clamp.
3. Slide the back plate over and unlock the current microphone.
4. Insert the desired new microphone and roll the latch over to lock it into the clamp.

3.2. Mounting the Clamp to the Helmet

1. Remove your helmet's cheek pads and pull up the center liner to access the inner shell.
2. Uvolněte třamp on the Sena unit.
3. Posuňte třamp onto the left side of the helmet, positioning it between the foam and the outer shell.
4. If there is any gap between the helmet and the clamp, use the provided adhesive rubber spacers to shim it for a secure fit.
5. For odd-shaped helmets or those with a different sized edge, replace the clamp's back with the adhesive mount and attach it directly to the helmet's exterior.

3.3. Instalace reproduktoru

1. Grab the Velcro adhesive pads and place them inside the helmet where the speakers will be positioned, directly over your ears.
2. Sena provides foam spacers that can be added to the speakers to push them closer to your ears, eliminating wind noise and improving sound quality. Attach these to the back of the speakers if needed.
3. Speaker covers can also be added to reduce friction between the speaker and your ear.
4. Route the speaker wires: the longer speaker wire typically goes to the right side of the helmet, looping it through the center liner. The shorter wire connects to the left speaker.
5. Place the speakers firmly onto the Velcro pads in the helmet.
6. Tip: After installing, play some music through the Sena unit to ensure the speakers are directly over your ears for the best sound experience. Adjust their position if necessary.

3.4. Microphone Positioning and Wire Management

1. If needed, use the provided Velcro areas to attach the microphone securely within the helmet.
2. Ensure the microphone is positioned directly in front of your face, with the windscreen on, and the correct side of the microphone facing your mouth for clear audio.
3. Carefully push all wires into the helmet's crevices, ensuring nothing will rub on your head or face during rides.

3.5. Závěrečná montáž

1. Reattach the helmet's center liner and cheek pads. This step is easiest to perform while the clamp není zcela utaženo.
2. Snap the cheek pads securely into place.
3. Utáhněte třamp in its desired position using the hex wrench.
4. Finally, slide the main Sena 20S EVO module onto the mounted clamp dokud nezapadne na místo.
5. To release the module, press the quick-release button located on the clamp.

Figure 3.1: Sena 20S EVO Mounted on Helmet

4. Návod k obsluze

The Sena 20S EVO offers intuitive controls for various functions. Familiarize yourself with the main jog dial and buttons for seamless operation.

4.1. Základní funkce

• Zapnutí/vypnutí: Refer to the quick start guide for specific button combinations.
• Ovládání hlasitosti: Rotate the jog dial.
• Bluetooth párování: Follow the pairing instructions in the quick start guide to connect with your smartphone or other Bluetooth devices.

4.2. Sdělení

• Interkom: The 20S EVO features improved intercom stability and distance. Initiate intercom conversations with other Sena users by following the pairing and connection procedures.
• Telefonní hovory: Connect to your smartphone via Bluetooth to make and receive calls hands-free.

4.3. Zvukové funkce

• Přehrávání hudby: Stream music from your connected smartphone. Controls for play, pause, skip tracks are available via the jog dial or voice commands.
• FM rádio: Tune into FM radio stations directly from the unit.

4.4. Pokročilé funkce

• Aplikace pro chytré telefony: Utilize the Sena smartphone app for configuration, firmware updates, and additional control over your device.
• Hlasové příkazy: Control various functions using intuitive voice commands, allowing for a truly hands-free experience while riding.

5. Údržba

To ensure the longevity and optimal performance of your Sena 20S EVO, follow these maintenance guidelines:

• Čištění: Regularly wipe the main module and clamp s měkkým, damp tkanina. Vyhněte se používání agresivních chemikálií nebo abrazivních čisticích prostředků.
• Nabíjení: Charge the unit using the provided USB cable. Ensure the charging port is clean and dry before connecting.
• Skladování: When not in use for extended periods, store the unit in a cool, dry place. Charge the battery periodically to maintain its health.
• Aktualizace firmwaru: Periodically check for and install firmware updates via the Sena Device Manager software or smartphone app. Updates often include performance improvements and bug fixes.

6. Řešení problémů

If you encounter issues with your Sena 20S EVO, try the following common troubleshooting steps:

• Bez napájení: Ujistěte se, že je baterie nabitá. Připojte ji ke zdroji napájení a zkontrolujte indikátor nabíjení.
• Z reproduktorů není slyšet žádný zvuk: Check speaker connections. Ensure speakers are correctly positioned over your ears. Verify volume levels.
• Problémy s interkomem: Ensure both units are within range and properly paired. Check for interference from other electronic devices.
• Odpojení Bluetooth: Try re-pairing the device with your smartphone. Ensure no other devices are causing interference.
• Resetovat: If the unit is unresponsive, perform a factory reset (refer to the quick start guide for specific instructions).

7. Specifikace

8. Záruka a podpora

Specific warranty details for the Sena 20S EVO are not provided in this manual. For comprehensive warranty information, product support, or service inquiries, please refer to the official Sena website or contact Sena customer service directly.