SENA 20S-EVO-01D Motorcycle Bluetooth Headset Communication System

1. Konec produktuview

The Sena 20S-EVO-01D is a state-of-the-art Bluetooth communication system designed for motorcycle riders. It offers a robust and stable intercom connection, allowing riders to communicate with each other, listen to music, make phone calls, and receive GPS navigation instructions. This model features an updated fixed shark fin antenna for enhanced performance and reliability.

Klíčové vlastnosti:

• Next-generation design with improved intercom functionality and stability.
• Sleek new fixed shark fin antenna design for enhanced intercom stability.
• Robust general performance updates for a superior riding experience.

2. Nastavení a instalace

Proper installation ensures optimal performance and comfort. Follow these steps to set up your Sena 20S-EVO-01D.

2.1. Obsah balení

Before beginning, verify all components are present in your package:

Image: All components of the Sena 20S-EVO-01D system, including the main module, speakers, and various microphone options.

• Sena 20S-EVO-01D Main Module
• Speaker Set (40 mm driver unit)
• Boom mikrofon
• Kabelový mikrofon
• Montáž Clamp Kit
• USB napájecí a datový kabel
• Speaker Pads, Hook and Loop Fasteners, and other accessories

2.2. Nabíjení zařízení

Fully charge the device before first use. The LED indicator will turn red during charging and blue when fully charged.

1. Connect the USB Power & Data Cable to the charging port on the main module.
2. Plug the other end into a USB wall charger or computer USB port.
3. Nabíjení obvykle trvá přibližně 2.5 hodiny pro úplné nabití.

2.3. Mounting the Headset to Your Helmet

The 20S-EVO-01D can be mounted using either the clamp kit or the adhesive mount.

Image: The Sena 20S-EVO-01D communication system securely attached to the left side of a white motorcycle helmet, demonstrating its low-profile integrace.

1. Vyberte místo montáže: Select a flat surface on the left side of your helmet, near the bottom edge.
2. Nainstalujte Clamp Sada: Povolte šrouby na třamp kit and slide it between the helmet shell and the inner padding. Tighten the screws securely.
3. Instalace reproduktorů: Place the speakers inside the helmet's ear pockets. Ensure they are centered with your ears for optimal audio. Use the provided hook and loop fasteners.
4. Instalace mikrofonu: For full-face helmets, use the wired microphone and attach it to the inside of the chin bar. For open-face or modular helmets, use the boom microphone and position it approximately 1-2 cm from your mouth.
5. Připojit kabely: Plug the speaker and microphone cables into the corresponding ports on the main module.
6. Attach Main Module: Slide the main module onto the mounted clampUjistěte se, že bezpečně zacvakne na místo.

3. Obsluha zařízení

Familiarize yourself with the controls and functions of your Sena 20S-EVO-01D.

3.1. Základní ovládací prvky

• Zapnutí/vypnutí: Stiskněte a podržte tlačítko telefonu a kolečko Jog Dial po dobu 1 sekundy.
• Nastavení hlasitosti: Rotate the Jog Dial clockwise to increase volume, counter-clockwise to decrease.
• Hlasový příkaz: Tap the Phone Button to activate voice commands.

3.2. Párování Bluetooth

Pair your 20S-EVO-01D with your mobile phone or other Bluetooth devices.

1. Párování telefonu: In power-off state, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately. Select "Sena 20S EVO" from your phone's Bluetooth device list.
2. Druhé spárování mobilního telefonu: In power-off state, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue alternately. Select "Sena 20S EVO" from your second phone's Bluetooth device list.

3.3. Interkomová komunikace

The 20S-EVO-01D supports up to 8-way intercom communication.

1. Pairing with another 20S EVO: Press and hold the Jog Dial on both units for 5 seconds until the LED flashes red. Tap the Jog Dial on either unit to complete pairing.
2. Spuštění interkomu: Tap the Jog Dial once to start intercom with the first paired friend. Tap twice for the second, and so on.
3. Ukončení interkomu: Tap the Jog Dial once to end intercom.

3.4. Music and Phone Calls

• Přehrát/pozastavit hudbu: Press the Jog Dial for 1 second.
• Další / předchozí skladba: Rotate the Jog Dial while pressing it for 1 second.
• Přijmout/ukončit hovor: Klepněte na tlačítko Telefon.
• Odmítnout hovor: Stiskněte a podržte tlačítko Telefon po dobu 2 sekund.

4. Údržba

Regular maintenance ensures the longevity and optimal performance of your Sena 20S-EVO-01D.

4.1. Čištění

• Wipe the main module with a soft, damp tkanina. Vyhněte se používání agresivních chemikálií nebo abrazivních čisticích prostředků.
• Ujistěte se, že všechny porty jsou bez prachu a nečistot.

4.2. Péče o baterie

• Vyhněte se častému úplnému vybíjení baterie.
• Pokud zařízení delší dobu nepoužíváte, skladujte jej na chladném a suchém místě.
• Charge the device at least once every 3-6 months to prevent deep discharge.

4.3. Aktualizace firmwaru

Sena regularly releases firmware updates to improve performance and add new features. Visit the Sena website to download the Sena Device Manager and update your device.

5. Řešení problémů

This section addresses common issues you might encounter with your 20S-EVO-01D.

6. Specifikace

Detailed technical specifications for the Sena 20S-EVO-01D.

7. Záruka a podpora

For warranty information, technical support, and frequently asked questions, please visit the official Sena website. You can also find updated manuals and firmware downloads there.

Společnost Sena Technologies, Inc.
Technologie 152 Dr.
Irvine, CA 92618, USA

For the most current support resources, please visit: www.sena.com