Husqvarna 445e II Gas Chainsaw User Manual

1. Konec produktuview

The Husqvarna 445e II is a gas-powered chainsaw designed for homeowners requiring a powerful and easy-to-handle tool for tasks such as pruning, limbing, and cutting firewood. It features an ergonomic design for comfortable operation and incorporates several technologies to enhance performance and user experience.

• X-Torq Engine: Designed to reduce fuel consumption and exhaust emissions.
• Smart Start Technology: Facilitates easier starting with minimal effort.
• Air Injection System: A centrifugal air cleaning system that helps prevent larger dust and debris particles from reaching the air filter, contributing to extended engine life.
• LowVib System: Reduces vibration levels to provide more comfortable chainsaw operation.
• Automatic Chain Oiler: Delivers a consistent supply of bar and chain oil for effective cutting.
• Side-Mounted Chain Tensioning: Allows for quick and convenient chain adjustments.
• Quick-Release Air Filter: Simplifies cleaning and replacement of the air filter.

Image: Husqvarna 445e II Gas Chainsaw, showcasinjeho celkový design.

Obrázek: Overview of key features and specifications including engine size (50.2cc), horsepower (2.8 HP), bar length (18"), and weight (11.2 lbs).

2. Bezpečnostní informace

Operating a chainsaw requires strict adherence to safety guidelines to prevent injury. Always read and understand the complete safety manual provided with your chainsaw before use.

Osobní ochranné prostředky (OOP)

Always wear appropriate personal protective equipment when operating the chainsaw. This includes:

• Helma: For head and face protection.
• Ochrana sluchu: Noise-reducing ear protection.
• Chaps: Chainsaw protective chaps with warp protective layers.
• rukavice: Synthetic leather palm gloves for grip and protection.
• Safety Boots: Steel-toed boots with good ankle support.

Image: A person wearing recommended safety gear including a helmet, hearing protection, chaps, and gloves while operating a chainsaw.

Obecná bezpečnostní opatření

• Ensure the work area is clear of bystanders and obstacles.
• Pevně ​​držte motorovou pilu oběma rukama.
• Be aware of kickback risks and proper cutting techniques.
• Never operate the chainsaw when fatigued or under the influence of substances.
• Regularly inspect the chainsaw for damage or wear before each use.

3. Nastavení a montáž

Palivo a řetězový olej

The Husqvarna 445e II requires a specific fuel mixture (gasoline and 2-cycle oil) and separate chain oil for lubrication. Always use high-quality fuel and oil as recommended by Husqvarna.

• Mix gasoline with 2-cycle engine oil at the specified ratio (e.g., 50:1).
• Fill the fuel tank with the mixed fuel.
• Fill the chain oil tank with appropriate bar and chain oil.

Image: Husqvarna 2-cycle oil (2.6 ounces) and an orange Husqvarna branded bar cover, which are included with the chainsaw.

Instalace lišty a řetězu

Proper installation of the guide bar and chain is crucial for safe and effective operation. Refer to the detailed instructions in your full manual for specific steps.

Napínání řetězu

Correct chain tension is vital. A chain that is too loose can derail, and a chain that is too tight can cause excessive wear and damage. The 445e II features a simple, side-mounted chain tensioning system.

Image: The included scrench combination screwdriver and wrench tool, used for quick chain and bar adjustments.

4. Návod k obsluze

Startování motorové pily

The Smart Start technology assists in easier starting. Follow these general steps:

1. Umístěte motorovou pilu na pevný, rovný povrch.
2. Zapněte brzdu řetězu.
3. Set the choke and primer bulb as per the starting procedure in your manual.
4. Pull the starter cord until the engine fires, then disengage the choke.
5. Znovu zatáhněte za startovací šňůru, dokud motor nenaskočí.
6. Allow the engine to warm up briefly before use.

Image: Close-up of the Smart Start starter mechanism, designed for quick and easy starting.

Techniky řezání

Always use proper cutting techniques to ensure safety and efficiency. Avoid cutting with the tip of the bar to prevent kickback. Plan your cuts and be aware of falling timber.

Image: A person operating the Husqvarna chainsaw to cut a log, demonstrating typical use.

Zastavení motorové pily

To stop the chainsaw, simply move the stop switch to the 'STOP' position. Engage the chain brake when moving short distances or between cuts.

5. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vaší motorové pily.

Čištění vzduchového filtru

The quick-release air filter allows for easy access and cleaning. A clean air filter is essential for optimal engine performance and life.

Image: Hand accessing the quick-release air filter for cleaning or replacement.

Bar and Chain Maintenance

Inspect the guide bar and chain regularly for wear and proper lubrication. Clean the bar rail and grease hole to ensure smooth operation.

Ostření řetězu

A sharp chain is crucial for efficient and safe cutting. Dull chains can lead to poor performance and increased risk of kickback.

Flip-Up Caps

The chainsaw features flip-up caps for easy access to the fuel and chain oil tanks, simplifying re-oiling and re-fueling.

Image: Close-up of the flip-up caps on the chainsaw, indicating easy access for refueling and re-oiling.

6. Řešení problémů

If you encounter issues with your Husqvarna 445e II chainsaw, consult the troubleshooting section of your full product manual. Common issues may include:

• Starting Difficulties: Check fuel mixture, spark plug, and air filter.
• Špatný řezný výkon: Inspect chain sharpness and tension, and ensure adequate chain oil.
• Nadměrné vibrace: Check for loose components or worn parts.

For complex issues or repairs, contact an authorized Husqvarna service center.

7. Specifikace

8. Záruka a podpora

For warranty information, service, or technical support, please refer to the official Husqvarna documentation included with your product or visit the official Husqvarna webUschovejte si doklad o koupi pro případ reklamace.