Uživatelská příručka k nástěnnému držáku televizoru Total Control WM1411

1. Konec produktuview

The Total Control WM1411 TV wall mount is designed for secure and stable mounting of television units ranging from 32 to 55 inches. This mount is compatible with various VESA sizes, specifically from 200 x 100 mm up to 400 x 400 mm, ensuring broad compatibility with many TV models. Its slim design allows for a minimal distance of only 19 mm from the wall, providing a sleek, low-profile appearance. All necessary mounting hardware is included for a straightforward installation process.

Klíčové vlastnosti:

• Kompatibilita velikosti displeje: Suitable for all TV sets from 32 to 55 inches.
• Snadná instalace: All installation materials, including screws, wall plugs, and spacers, are provided in the product packaging for simple and easy setup.
• Kompatibilita VESA: Supports VESA sizes from 200 x 100 mm to 400 x 400 mm. VESA is a standard that specifies the distance between the mounting holes on the back of your TV.
• Slim Profile: Mounts TV only 19 mm from the wall.
• Odolná konstrukce: Made from alloy steel or aluminum for robust support.

2. Bezpečnostní informace

Please read all instructions carefully before installation. Incorrect installation may result in property damage, serious injury, or death. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Ujistěte se, že montážní povrch bezpečně unese celkovou hmotnost držáku a displeje.
• Nepřekračujte maximální nosnost držáku.
• Use appropriate tools and follow all drilling and mounting instructions precisely.
• Always use a stud finder to locate wooden studs for secure mounting. If mounting to concrete or brick, use appropriate anchors.
• Během instalace držte děti a domácí zvířata mimo dosah.
• Periodically check the mount for any signs of wear or loose connections.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny součásti přítomny a nepoškozené. Pokud některé součásti chybí nebo jsou poškozené, nepokračujte v instalaci a kontaktujte zákaznickou podporu.

• Wall Plate (Main Bracket)
• Držáky na televizi (2 kusy)
• Mounting Hardware Kit (includes various screws, wall anchors, washers, and spacers for TV and wall attachment)

4. Nastavení a instalace

4.1. Než začnete

• Zkontrolujte VESA schéma pro TV: Vyhledejte čtyři montážní otvory na zadní straně televizoru a změřte mezi nimi vodorovnou a svislou vzdálenost. Tento držák podporuje VESA rozměry od 200x100 mm do 400x400 mm.
• Určete typ zdi: Identify if your wall is made of wood studs, concrete, or brick. This will determine the type of anchors and drilling required.
• Sbírejte nástroje: You will need a drill, stud finder (for wood walls), level, pencil, measuring tape, and a screwdriver.

4.2. Postup instalace

1. Připevnění držáků televizoru k televizoru: Carefully place your TV face down on a soft, clean surface. Align the two vertical TV brackets with the mounting holes on the back of your TV. Use the appropriate screws and spacers from the hardware kit to secure the brackets. Ensure the brackets are centered and level.
2. Mark Wall Drilling Locations: Hold the wall plate against the wall at your desired TV height. Use a level to ensure it is perfectly horizontal. Mark the drilling points through the holes on the wall plate with a pencil. For wood stud walls, use a stud finder to locate the center of the studs and align the wall plate holes with them.
3. Vrtací pilotní otvory: Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the anchors being used (refer to the hardware kit instructions).
4. Install Wall Anchors (if applicable): If mounting to concrete or brick, insert the appropriate wall anchors into the drilled holes. Tap them gently with a hammer until they are flush with the wall surface.
5. Bezpečná nástěnná deska: Align the wall plate with the drilled holes and secure it to the wall using the provided screws and washers. Tighten all screws firmly but do not overtighten.
6. Montáž televizoru na nástěnnou desku: With assistance, carefully lift the TV (with the attached TV brackets) and hook the TV brackets onto the wall plate. Ensure the TV brackets are securely seated on the wall plate.
7. Připevnění televizoru k nástěnné desce: Vyhledejte bezpečnostní šrouby nebo zajišťovací mechanismy na spodní straně držáků televizoru. Utažením těchto šroubů připevněte televizor k nástěnné desce a zabráňte tak jeho náhodnému uvolnění.

5. Návod k obsluze

The Total Control WM1411 is a fixed TV wall mount, meaning it does not offer tilt, swivel, or extension capabilities. Once installed, its operation is minimal.

• Secure Fit: Ensure the TV is securely locked onto the wall plate using the safety screws.
• Správa kabelů: Organize and route your TV cables neatly behind the TV or along the wall for a clean appearance.

6. Údržba

Pravidelná údržba pomáhá zajistit dlouhou životnost a bezpečnost vašeho nástěnného držáku televizoru.

• Čištění: Dust the mount periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Kontrola připojení: Every 6-12 months, visually inspect all screws and connections to ensure they remain tight and secure. Retighten any loose screws.
• Strukturální integrita: Check for any signs of damage, corrosion, or deformation on the mount or the wall. If any issues are found, consult a professional.

7. Řešení problémů

Pokud se během instalace nebo po ní setkáte s problémy, podívejte se na následující běžné problémy a jejich řešení.

• Televizor není vodorovně umístěn: Ensure the wall plate was installed perfectly level. If not, carefully adjust the wall plate or use shims if minor adjustments are needed. Re-check with a level.
• Držák se zdá být nestabilní: Double-check that all wall screws are securely tightened and that the correct wall anchors were used for your wall type. Ensure the TV is properly seated and locked onto the wall plate.
• Chybějící části: Refer to the 'Package Contents' section. If parts are missing, do not proceed with installation. Contact Total Control customer support for replacement parts.
• Držák na televizi se nehodí: Verify your TV's VESA pattern matches the mount's supported range (200x100mm to 400x400mm). Also, ensure your TV's screen size is within the 32-55 inch range.

8. Specifikace

9. Záruka a podpora

For information regarding warranty coverage for your Total Control WM1411 TV wall mount, please refer to the documentation included with your purchase or visit the official Total Control webZáruční podmínky se obvykle vztahují na výrobní vady po stanovenou dobu od data nákupu.

If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact Total Control customer support. Contact details can usually be found on the product packaging or the manufacturer's official webmísto.