Avalon A8CTBOTTLELESSWHT Countertop Self Cleaning Touchless Bottleless Cooler Dispenser Instruction Manual

Zavedení

The Avalon A8CTBOTTLELESSWHT Countertop Water Cooler Dispenser provides convenient access to hot and cold filtered water directly from your water line. Featuring self-cleaning capabilities and a dual filtration system, this dispenser is designed for ease of use and maintenance, ensuring a continuous supply of great-tasting water.

Mezi klíčové vlastnosti patří:

• Dual Filtration: Patented Sediment (Avalon A5FILTER) and Carbon Block (Avalon A4FILTER) filters for clean water.
• Trysky pro horkou a studenou vodu: Instant access to piping hot and crisp cold water.
• Bottleless Design: Connects directly to your water line, eliminating the need for water bottles.
• Funkce samočištění: Sanitizes and purifies the dispenser automatically.
• Vestavěné noční světlo: Illuminates water spouts for visibility in low light.
• Dětská pojistka: Zabraňuje nechtěnému výdeji horké vody.

Bezpečnostní informace

Před použitím tohoto spotřebiče si prosím přečtěte všechny pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

• Ujistěte se, že je dávkovač zapojen do uzemněné zásuvky.
• Nepoužívejte dávkovač, pokud je poškozený napájecí kabel nebo zástrčka.
• Uchovávejte dávkovač mimo dosah přímého slunečního záření a zdrojů tepla.
• Neponořujte dávkovač, kabel ani zástrčku do vody ani jiných kapalin.
• Supervise children when they are near the dispenser, especially when dispensing hot water.
• Always turn off the hot water heating switch when not in use for extended periods.

Co je v krabici

Your Avalon A8CTBOTTLELESSWHT package includes:

• Avalon A8CTBOTTLELESSWHT Water Cooler Dispenser
• Sediment Filter (Avalon A5FILTER)
• Carbon Block Filter (Avalon A4FILTER)
• Kompletní instalační sada (6 metrů hadice 1/4", třícestný plastový adaptér 1/4", adaptér pod dřez 3/8" s uzavíracím ventilem, adaptér pro proplachování filtru)

Nastavení a instalace

Follow these steps for proper installation of your water cooler. It is recommended to watch the installation video for visual guidance.

1. Připojení vodovodního potrubí

The Avalon A8CTBOTTLELESSWHT connects directly to your cold water line. You can connect it either under your sink or to your refrigerator's water line.

Under the Sink Connection:

1. Locate your cold water supply underneath your sink.
2. Turn the cold water valve to the OFF position and disconnect the water supply line.
3. Take the metal adapter with valve (included in the installation kit) and connect it between the cold water supply line and the cold water valve.
4. Remove the nut from the metal adapter with valve. Insert the white PE tubing through the nut and onto the protruding part of the adapter. Secure the nut tightly.

Refrigerator Water Line Connection:

1. Locate your cold water supply for your refrigerator line.
2. Turn the cold water valves to the OFF position.
3. Cut the PE tubing that is currently inserted into the refrigerator.
4. Insert the 3-way plastic adapter between the cut tubing.
5. Insert the PE tubing supplied with the water cooler into the remaining opening of the 3-way plastic adapter.

2. Flushing Filters Prior to Use

It is crucial to flush both the Sediment and Carbon Block filters before installing them into the dispenser to remove any carbon fines.

1. Twist the Sediment filter into the provided filter flushing adapter by rotating it clockwise.
2. Take the open end of the PE tubing (now connected to your water supply) and insert it into the left inlet hole of the filter flushing adapter in the direction of the arrow.
3. Hold the filter in place over a sink or a bucket and turn on the water supply. Allow the water to flow through the adapter for approximately two minutes.
4. Repeat these steps with the Carbon Block filter.

The dual filtration system, including the Multi-Layer Sediment filter (Stage 1) and Carbon Block filter (Staga 2).

3. Finishing the Water Cooler Installation

1. Attach the two black mounting brackets to the back of the cooler by inserting the longer pegs upward into the slots of the condenser. Then click the shorter pegs into place.
2. Slide the two filter adapters into the mounting brackets and twist the Sediment filter into the left adapter and the Carbon filter into the right filter adapter.
3. Locate the valve and tube assembly and connect the tube to the left insert of the left filter adapter.
4. Connect the PE tubing from your water source to the open end of the valve and tube assembly.
5. Connect the smallest PE tubing to the inner outlets of both filters.
6. Remove the plug from the water inlet located on the back of the unit by pressing the push connect ring that is behind the plug.
7. Connect the remaining small PE tubing to the right side of the right filter adapter and insert the open end of the PE tubing into the water inlet.
8. Now turn on the valve located next to the left side of the filter.
9. Then turn both valves at the cold water source under your sink (or behind your refrigerator) back to the ON position as well.
10. Plug the power cord into a grounded wall outlet and allow the water to fill in the tanks for about 10 to 15 minutes.
11. Next, dispense a drop of water from the hot and cold spouts to test if the inner tanks have filled.
12. Finally, activate the heating and cooling switches located on the back of your unit.

Přední view of the Avalon A8CTBOTTLELESSWHT Water Cooler Dispenser, showing the hot and cold water spouts.

Návod k obsluze

• Výdej vody: Place your cup under the desired spout (red for hot, blue for cold) and press the paddle. The touchless dispensing feature allows for germ-free operation.
• Bezpečnost při používání teplé vody: The hot water spout features a child safety lock. To dispense hot water, you must simultaneously push the safety button and press the hot water paddle.
• noční světlo: The built-in nightlight makes the water spouts clearly visible at night.
• Indikátor filtru: A light will illuminate when the filter needs to be replaced.

Close-up of the touchless dispensing paddles on the Avalon water cooler.

Údržba

• Výměna filtru: The patented dual filters (Sediment and Carbon Block) should be replaced every 6 months or after 1500 gallons, whichever comes first. The filter indicator light will signal when replacement is due.
• Samočištění: The dispenser features a self-cleaning function that sanitizes and purifies the internal components. Refer to the specific instructions in the full user manual for activating this feature.

Odstraňování problémů

If you experience issues with your dispenser, please refer to the following common troubleshooting steps:

• Bez dávkování vody: Check if the water supply valve is fully open. Ensure the dispenser is properly plugged in and powered on. Verify filters are correctly installed and not clogged.
• Water Not Hot/Cold Enough: Ensure the heating/cooling switches on the back of the unit are turned ON. Allow sufficient time for the water to reach the desired temperature (typically 15-30 minutes after initial setup or prolonged inactivity).
• Únik: Check all water line connections for tightness. Ensure filters are securely twisted into their adapters.
• Neobvyklý hluk: Some operational noise is normal as the compressor and heating elements work. Excessive or unusual noise may indicate an issue; consult the full user manual or customer support.

Specifikace

Záruka a podpora

For detailed warranty information and customer support, please refer to the official Avalon website or the full user manual provided with your product. You can also find the full user manual in PDF format zde.