1. Úvod
Thank you for choosing the Beninca Bull 1024C Automatic Slide Chain Gate Opener. This system is designed for intensive use, providing reliable and secure operation for your sliding gate. It features an integrated energy-saving system (ESA SYSTEM) and can operate even during power failures with an optional battery pack. This manual provides essential information for the safe installation, operation, and maintenance of your gate opener.
Figure 1: Beninca Bull 1024C Automatic Slide Chain Gate Opener
2. Důležité bezpečnostní informace
Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in serious injury or property damage.
- Kvalifikovaný personál: Instalaci a údržbu smí provádět pouze kvalifikovaný personál.
- Odpojení napájení: Always disconnect power to the gate opener before performing any maintenance or adjustments.
- Pohyblivé části: Keep hands, feet, and clothing clear of the gate and its moving parts during operation.
- Děti a domácí mazlíčci: Do not allow children or pets to play near the gate or its controls.
- Nouzové uvolnění: Seznamte se s mechanismem ručního uvolnění pro nouzové situace.
- Senzory překážek: Ensure all safety devices, such as photocells and anti-crushing controls, are correctly installed and functioning.
- Podmínky prostředí: The unit is designed for outdoor use but should be protected from direct water jets and extreme weather conditions.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny níže uvedené komponenty:
- 1 x Beninca Bull 1024C Gate Opener with CPanel
- 1x Přijímač
- 2 x Remote Control units
- Montážní materiál (šrouby, podložky atd.)
- Ruční odblokovací klíč
- Adjustable magnetic stops
- Strong chain brackets
Figure 2: Typical package contents (illustration may vary)
4. Nastavení a instalace
This section outlines the general steps for installing the Beninca Bull 1024C gate opener. Refer to the detailed installation diagrams for precise measurements and wiring.
4.1 Montáž pohonu
- Prepare a stable, level concrete base for the operator. The 10-inch high-rise galvanized base should be securely anchored.
- Position the operator unit ensuring proper alignment with the gate's chain.
- Secure the operator to the base using appropriate anchor bolts.
- Attach the strong chain brackets to the gate, ensuring they are aligned with the operator's sprocket.
- Install the chain, ensuring it is taut but not overly tight, allowing for smooth movement.
Figure 3: Operator mounting and chain installation
4.2 Elektrické připojení
Veškeré elektrické připojení musí být provedeno kvalifikovaným elektrikářem v souladu s místními předpisy.
- Ensure the main power supply is disconnected before opening the control panel.
- Access the internal electronic board by removing the weather-resistant plastic cover.
- Connect the 24Vdc power supply to the designated terminals on the control board.
- Connect any external safety devices (photocells, safety edges) and accessories (keypads, intercoms) to their respective terminals.
- Close the control panel cover securely to maintain weather resistance.
Figure 4: Electrical wiring diagram (consult full manual for details)
4.3 Adjusting Magnetic Stops
The adjustable magnetic stops define the gate's open and closed positions.
- Manually move the gate to its desired fully open position.
- Mount the 'open' magnetic stop on the gate rail so that it activates the sensor on the operator.
- Repeat the process for the 'closed' position.
- Fine-tune the positions for precise gate travel.
5. Provoz
5.1 Párování dálkového ovládání
The system includes a long-range radio-receiver and two remote controls. To pair additional remotes or re-pair existing ones:
- Press the programming button on the receiver board (refer to the control panel diagram for exact location).
- While the receiver is in programming mode, press the desired button on your remote control.
- The receiver's LED will indicate successful pairing.
- Test the remote control to ensure proper operation.
Figure 5: Remote control unit
5.2 Základní obsluha brány
- Pressing a paired remote control button will initiate the gate's movement (open or close).
- Druhé stisknutí během pohybu bránu zastaví.
- Třetím stisknutím se směr otáčení brány obrátí.
- The system features soft-start and soft-stop for smooth and quiet operation.
5.3 ESA System Functionality
The patented ESA (Energy-Saving-App) system ensures extremely low-power absorption. When the gate is not in use, the system enters a standby mode, effectively turning off to conserve energy. This contributes to the 24Vdc operator's efficiency for intensive use.
5.4 Ruční uvolnění
In case of power failure or malfunction, the gate can be operated manually using the provided key lock release mechanism. Insert the key into the lock on the operator and turn it to disengage the motor, allowing the gate to be moved by hand.
6. Údržba
Regular maintenance ensures the longevity and reliable operation of your Beninca Bull 1024C gate opener. Always disconnect power before performing any maintenance.
- Měsíční: Check the gate's movement for any obstructions or unusual noises. Ensure the chain is properly tensioned and lubricated.
- Čtvrtletní: Inspect all electrical connections for corrosion or loose wiring. Test safety devices (photocells, anti-crushing control) for proper function.
- Každoročně: Have a qualified technician perform a comprehensive inspection of the entire system, including the motor, gearbox (aluminum gear-box grease-lubricated), and control board.
- Čištění: Keep the operator unit and surrounding area clean from debris, leaves, and dirt. The weather-resistant plastic cover should be wiped clean.
7. Průvodce odstraňováním problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat. V případě problémů, které zde nejsou uvedeny, kontaktujte zákaznickou podporu.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Brána se nepohybuje | No power; remote not paired; safety device activated; manual release engaged. | Check power supply; re-pair remote; check safety sensors for obstructions; ensure manual release is disengaged. |
| Brána se neočekávaně zastaví | Obstruction detected (amperometric anti-crushing control); faulty safety device; power fluctuation. | Remove obstruction; check and clean safety sensors; consult electrician for power issues. |
| Dálkové ovládání nefunguje | Remote battery low/dead; remote out of range; remote not paired. | Replace remote battery; ensure you are within range; re-pair remote control. |
| Gate moves sluggishly | Chain tension incorrect; gate rollers/track obstructed; motor issue. | Adjust chain tension; clean gate track and rollers; contact support if motor issue suspected. |
8. Technické specifikace
Key technical details for the Beninca Bull 1024C Automatic Slide Chain Gate Opener:
| Funkce | Detail |
|---|---|
| Model | Bull 1024C |
| Výrobce | Beninca |
| Napájení | 24 V DC |
| Používání | Intenzivní používání |
| Systém úspory energie | Integrated ESA SYSTEM |
| Bezpečnostní funkce | Amperometric anti-crushing control, Encoder-based operation |
| Ovládací panel | Internal electronic board with LCD display for programming |
| Úpravy | Digital adjusting for torque & timing, Soft-start, soft-stop, cycle counter |
| Převodovka | Aluminum, grease-lubricated |
| Báze | 10" high-rise galvanized base |
9. Záruka a zákaznická podpora
Beninca products are manufactured to high-quality standards. This product typically comes with a manufacturer's warranty covering defects in materials and workmanship. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions.
For technical assistance, troubleshooting, or to inquire about spare parts, please contact your authorized Beninca dealer or customer support:
- Webmísto: www.beninca.com
- E-mail: support@beninca.com
- Telefon: Consult your regional Beninca distributor for local contact numbers.
