Zavedení
This manual provides comprehensive instructions for the setup, operation, and maintenance of your SE ELECTRONICS X1 S Microphone System. The X1 S Vocal Pack includes the X1-S microphone, sE ISOLATION-PACK (with pop shield), and a 3-meter microphone cable, offering essential components for high-quality audio recording.
The X1 S features a custom-designed, hand-crafted true condenser capsule, capable of handling high Sound Pressure Levels (SPL) up to 160dB, making it suitable for a wide range of audio sources. The included ISO PACK provides a quick-lock shockmount and a metal pop filter, designed to absorb low-end rumble, footfall noise, and offer superb plosive protection.
Obsah balení
- sE X1 S Condenser Microphone
- sE ISOLATION-PACK (Shockmount and Metal Pop Filter)
- 3-meter XLR Microphone Cable
Průvodce nastavením
Follow these steps to set up your X1 S Microphone System:
- Attach the Shockmount: Carefully screw the sE ISOLATION-PACK shockmount onto a standard microphone stand. Ensure it is securely fastened.
Image: The SE ELECTRONICS X1 S microphone securely mounted within its shockmount, with the pop filter positioned in front.
- Vložení mikrofonu: Gently slide the X1 S microphone into the shockmount's cradle. The quick-lock mechanism will secure the microphone in place, isolating it from vibrations and handling noise.
- Umístění popového filtru: Attach the metal pop filter to the shockmount. Position it approximately 2-3 inches (5-7.5 cm) in front of the microphone capsule. This helps to reduce plosive sounds (e.g., 'p' and 'b' sounds) and protect the microphone from moisture.
Obrázek: Detailní záběr view of the SE ELECTRONICS X1 S microphone, showing the integrated shockmount and the metal mesh pop filter.
- Připojte kabel: Connect one end of the supplied 3-meter XLR microphone cable to the XLR output on the bottom of the X1 S microphone. Connect the other end to an XLR input on your audio interface, mixer, or preampživější.
- Použít fantomovou sílu: The X1 S is a condenser microphone and requires +48V phantom power to operate. Activate phantom power on your audio interface or mixer. Refer to your audio device's manual for instructions on enabling phantom power.
Návod k obsluze
The X1 S is designed for versatile recording applications. Here are key operational considerations:
- Polární vzor: The X1 S features a fixed cardioid (unidirectional) polar pattern. This means it is most sensitive to sounds coming from the front and rejects sounds from the sides and rear, making it ideal for isolating a sound source.
- Spínače podložek: The microphone includes two switchable attenuation pads:
- -10dB podložka: Use this setting when recording louder sources to prevent input clipping on your audio interface.
- -20dB podložka: Engage this for extremely loud sources, such as close-miked drums or guitar amplifiers, to further reduce the signal level.
- Nízkořezný filtr: The X1 S also features two switchable low-cut (high-pass) filters:
- 80Hz Low-Cut: Activates a filter at 80 Hz to reduce unwanted low-frequency rumble, such as HVAC noise or footfall vibrations.
- 160Hz Low-Cut: Provides a steeper cut at 160 Hz, useful for reducing proximity effect (excessive bass boost when close to the microphone) or further cleaning up low-end frequencies.
- Doporučená použití: The X1 S is highly versatile and recommended for:
- Vocals and Speech
- Broadcasting and Podcasting
- Elektrická kytara Ampzáchranáři
- Drums (overhead or close-miking)
- Video Recording and Streaming
Údržba
Správná údržba zajišťuje dlouhou životnost a optimální výkon vašeho mikrofonu:
- Čištění: Use a soft, dry cloth to wipe the microphone body. Do not use liquid cleaners or solvents, as they can damage the finish or internal components. For the pop filter, a soft brush can be used to remove dust.
- Skladování: When not in use, store the microphone in its original packaging or a protective case to shield it from dust, moisture, and physical damage. Avoid storing in environments with extreme temperatures or high humidity.
- Zacházení: Always handle the microphone with care. Avoid dropping it or subjecting it to strong impacts, as this can damage the sensitive condenser capsule.
- Péče o kabely: Coil the XLR cable loosely when storing to prevent kinks and damage to the internal wiring. Avoid placing heavy objects on the cable.
Odstraňování problémů
If you encounter issues with your X1 S Microphone System, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvukový výstup |
|
|
| Distorted Sound / Clipping |
|
|
| Excessive Bass / Muddy Sound |
|
|
| Background Noise / Hum |
|
|
Specifikace
| Název modelu | X1 S VOCAL PACK |
| Typ mikrofonu | Kondenzátor |
| Polární vzor | Jednosměrný (kardioidní) |
| Frekvenční rozsah | 20 Hz - 20 kHz |
| Audio Citlivost | 160 dB (Max SPL) |
| Impedance | 1000 Ohmy |
| Odstup signálu od šumu | 87 dB |
| Úroveň hluku | 16 dB |
| Pad Switches | -10dB, -20dB |
| Low-Cut Filters | 80Hz, 160Hz |
| Zdroj napájení | +48V Phantom Power (XLR) |
| Technologie připojení | XLR |
| Materiál | Kov |
| Rozměry produktu (D x Š x V) | 15.55 x 7.87 x 4.92 palce |
| Hmotnost položky | 15.7 unce (445 gramů) |
| Výrobce | SE Electronics |
| UPC | 819032011201 |
Informace o záruce
SE ELECTRONICS products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official SE ELECTRONICS webUschovejte si doklad o koupi pro případné reklamace.
Poznámka: Záruční podmínky se mohou lišit v závislosti na regionu.
Podpora
For technical support, service, or further inquiries regarding your SE ELECTRONICS X1 S Microphone System, please contact SE ELECTRONICS customer support through their official webwebu nebo kontaktních informací uvedených v dokumentaci k produktu.
Online zdroje: www.seelectronics.com/support
