Valore 7 Retrofit Easy Install Shower Panel

1. Konec produktuview

The Valore 7 shower panel is designed for retrofit installation into existing shower systems that include a cold and hot faucet. It connects to an existing shower head spout. The panel body is constructed from durable 304 stainless steel, offering a modern aesthetic for bathroom upgrades.

This shower panel features a 3-way shower spray mode system, allowing for versatile water delivery options. It includes a brass shower wand with a brass shower cradle for handheld use.

Image 1.1: Valore 7 Shower Panel installed in a modern bathroom setting.

2. Bezpečnostní informace

• Před zahájením instalace se ujistěte, že jsou všechny přívody vody uzavřeny.
• Během instalace používejte vhodné osobní ochranné prostředky, jako jsou ochranné brýle a rukavice.
• Pokud si nejste jisti některou částí instalace, poraďte se s kvalifikovaným instalatérem.
• Do not use abrasive cleaners or harsh chemicals on the shower panel's surface, as this may damage the finish.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Sprchový panel
• Sprchová hlavice
• Shower Wand (Handheld Shower)
• Shower Cradle for Handheld Shower
• Montážní hardware
• Flexible Hoses for Water Connection
• Instalační manuál

4. Specifikace

5. Rozměry

Podrobné rozměry produktu naleznete na níže uvedeném obrázku.

Image 5.1: Valore 7 Shower Panel Dimensions Diagram. All measurements are approximate.

6. Pokyny k instalaci

The Valore 7 shower panel is designed for easy retrofit installation. It connects to your existing shower head spout and hot/cold water lines.

6.1 Předinstalace

1. Vypněte přívod vody: Locate and turn off the main water supply to your bathroom or entire home.
2. Remove Existing Fixtures: Carefully remove your current shower head and any other fixtures that will be replaced by the shower panel.
3. Kontrola instalatérských rozvodů: Ensure your existing hot and cold water lines are accessible and in good condition. This panel is designed for systems with existing hot and cold faucets.
4. Water-Saving Regulator: If your water pressure is naturally low, consider not installing any water-saving regulator that may be included with the panel, as it can further reduce flow. If you use the hang-on to the shower pipe method, access to the regulator may be limited after installation.

6.2 Montáž panelu

5. Umístění: Hold the shower panel against the wall in the desired position. Mark the locations for mounting brackets. Ensure the panel is level.
6. Vrtací otvory: Vyvrtejte pilotní otvory na vyznačených místech. V případě potřeby vložte hmoždinky do zdi.
7. Bezpečné držáky: Připevněte montážní konzoly ke zdi pomocí dodaných šroubů.
8. Upevnění panelu: The unit may include double-sided tape for securing it to the wall. Once applied, repositioning is difficult without replacing the tape. Carefully align and press the panel onto the brackets and tape.

6.3 Připojení vodovodního potrubí

9. Připojte hadice: Attach the flexible hot and cold water supply hoses from the shower panel to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
10. Ruční sprcha: Connect the handheld shower hose to its designated outlet on the panel.
11. Zapněte vodu: Slowly turn the main water supply back on and check for any leaks. Tighten connections as needed.
12. Seal Edges (Optional but Recommended): Apply a bead of clear silicone caulk along the sides of the shower panel where it meets the tile to create a seal and prevent water intrusion.

Note: This shower panel does not include a temperature/volume control valve. Your existing shower valve will control water temperature and flow.

7. Návod k obsluze

The Valore 7 shower panel features a 3-way diverter to control water flow to different functions.

7.1 Regulace průtoku vody

Use your existing shower's hot and cold water handles to adjust the desired water temperature and overall flow rate.

7.2 Selecting Spray Modes

The panel has a control knob or lever to switch between the three spray modes:

• Dešťová přeháňka: Provides a wide, gentle rainfall-like spray from the overhead shower head.


Image 7.1: Valore 7 Shower Panel demonstrating the rain shower function.

• Tělesné trysky: Delivers targeted streams of water from the integrated body massage jets.

Image 7.2: Valore 7 Shower Panel demonstrating the body jet function.
• Ruční sprcha: Directs water flow to the brass shower wand for focused rinsing or cleaning.

Rotate or move the diverter control to select your desired spray function. Only one function can be active at a time.

8. Údržba

8.1 Čištění

• Pravidelně čistěte povrch nerezové oceli měkkým hadříkem a jemným mýdlem nebo neabrazivním čisticím prostředkem na nerezovou ocel.
• Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the finish.
• For hard water spots, use a solution of white vinegar and water, then rinse thoroughly.
• Periodically clean the nozzles of the shower head and body jets to remove mineral buildup. You can often do this by gently rubbing the rubber nozzles.

8.2 Obecná péče

• Ensure all connections remain tight to prevent leaks.
• If any part becomes loose, gently tighten it. Do not overtighten.

9. Řešení problémů

10. Záruka a podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valore customer service. Keep your proof of purchase for warranty claims.