myTouchSmart Digital Bar Outlet Timer (Model 26745) Instruction Manual

Zavedení

This manual provides instructions for the setup, operation, and maintenance of your myTouchSmart Digital Bar Outlet Timer, Model 26745. Please read these instructions carefully before use and retain them for future reference.

The myTouchSmart Digital Bar Outlet Timer is designed to automate the ON/OFF cycles of indoor lights, lamps, small appliances, and electronics. It features a space-saving design, a digital display, and two programmable custom ON/OFF times.

Důležité bezpečnostní pokyny

• Pouze pro vnitřní použití.
• Do not exceed electrical ratings: 125V AC, 60Hz, 15A (1875W) General Purpose/Resistive, 5A (625W) Tungsten, 1/2 HP.
• Do not use with appliances that have heating elements, such as coffee makers, toasters, or heaters, as this may create a fire hazard.
• Ensure the timer is fully inserted into the outlet.
• Do not immerse in water or use in wet locations.
• Keep children away from the timer.
• Nerozebírejte jednotku. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.

Vlastnosti produktu

• Space-saving slim bar design.
• One (1) polarized outlet.
• Digital display for easy programming.
• Two custom daily ON/OFF times.
• Backup battery to save settings during power outages.
• Kompatibilní s CFL, LED, žárovkami a halogenovými světelnými zdroji.

Popis obrázku: A detailed diagram of the myTouchSmart Digital Bar Outlet Timer, highlighting its components such as the custom ON/OFF time buttons, clock/set mode indicator, active program indicator, AM/PM indicator, and scroll buttons. This image helps users identify the different parts of the timer for programming.

Nastavení a počáteční konfigurace

1. Charging the Backup Battery

Before initial use, plug the timer into a live electrical outlet for at least 30 minutes to charge the internal backup battery. This battery retains your settings during power outages or when the timer is unplugged.

2. Nastavení aktuálního času

1. Stiskněte a podržte HODINY tlačítko.
2. Při držení HODINY, stiskněte tlačítko ▲ (nahoru) nebo ▼ (down) button to adjust the hour. The AM/PM indicator will change accordingly.
3. Uvolněte HODINY button when the correct hour is set.
4. Stiskněte a podržte HODINY znovu tlačítko.
5. Při držení HODINY, stiskněte tlačítko ▲ (nahoru) nebo ▼ (down) button to adjust the minutes.
6. Uvolněte HODINY button when the correct minute is set.

Popis obrázku: This image illustrates the "Simple Setup" process for the timer. It shows the digital display and buttons, with arrows pointing to the scroll buttons for setting the current time and the "my on time" and "my off time" buttons for custom programming. The image emphasizes the ease of setting up the device.

Návod k obsluze

Programming Custom ON/OFF Times

The timer allows for two custom daily ON/OFF programs. Follow these steps to set your desired schedules:

Program 1:

1. Stiskněte tlačítko MY ON TIME button (left side) once. The display will show "1 ON".
2. Stiskněte tlačítko ▲ (nahoru) nebo ▼ (down) button to adjust the desired ON hour for Program 1.
3. Stiskněte tlačítko MY ON TIME znovu stiskněte tlačítko pro potvrzení hodiny a přechod na minuty.
4. Stiskněte tlačítko ▲ (nahoru) nebo ▼ (down) button to adjust the desired ON minutes for Program 1.
5. Stiskněte tlačítko MY ON TIME button again to save the ON time.
6. Stiskněte tlačítko MY OFF TIME button (left side) once. The display will show "1 OFF".
7. Stiskněte tlačítko ▲ (nahoru) nebo ▼ (down) button to adjust the desired OFF hour for Program 1.
8. Stiskněte tlačítko MY OFF TIME znovu stiskněte tlačítko pro potvrzení hodiny a přechod na minuty.
9. Stiskněte tlačítko ▲ (nahoru) nebo ▼ (down) button to adjust the desired OFF minutes for Program 1.
10. Stiskněte tlačítko MY OFF TIME button again to save the OFF time.

Program 2:

Repeat the steps above using the MY ON TIME a MY OFF TIME tlačítka na pravá strana of the timer. The display will show "2 ON" and "2 OFF" respectively.

Popis obrázku: This image displays two examples of how to program the timer. Program 1 is set to turn ON at 6:00 A.M. and OFF at 9:00 A.M. Program 2 is set to turn ON at 4:00 P.M. and OFF at 10:00 P.M. This visual guide helps users understand how to set their own custom schedules.

Connecting an Appliance

Once programmed, plug the appliance or light you wish to control into the polarized outlet on the side of the timer. Ensure the appliance's power switch is in the ON position for the timer to control its power cycle.

Popis obrázku: The image shows the myTouchSmart Digital Bar Outlet Timer plugged into a standard wall outlet. A lamp's power cord is then plugged into the polarized outlet on the side of the timer, demonstrating how to connect a device for timed operation. The slim design of the timer is visible, not obstructing the second wall outlet.

Údržba

• Čištění: Disconnect the timer from the power outlet before cleaning. Wipe with a dry, soft cloth. Do not use liquid or abrasive cleaners.
• Baterie: The internal backup battery is not user-replaceable. If the display becomes dim or settings are not retained after charging, the unit may need replacement.
• Skladování: Pokud časovač nepoužíváte, uložte jej na chladném a suchém místě.

Odstraňování problémů

Specifikace

• Model: 26745
• Elektrické hodnocení: 125 V AC, 60 Hz
• Maximální zatížení: 15A (1875W) General Purpose/Resistive
• Tungsten Load: 5 A (625 W)
• Zatížení motoru: 1 / 2 HP
• Prodejny: 1 Polarized
• Rozměry: Přibližně 2 x 2.5 x 1.25 palce
• Osvědčení: CSA

Záruka a podpora

This product is backed by a one-year limited warranty. For warranty claims or technical support, please contact myTouchSmart customer service. Refer to the product packaging or the manufacturer's webstránky pro kontaktní informace.

Výrobce: Jasco Products Company, LLC