Zavedení
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your MENABO Leopard XL Roof Bar. Please read this manual thoroughly before attempting to install or use the product to ensure safe and proper operation.
The MENABO Leopard XL is an aluminium roof bar designed for quick and convenient fixing, featuring a "blade" profile for maximum aerodynamics. It is engineered to provide a secure and reliable platform for transporting various items on your vehicle's roof.
Konec produktuview
Figure 1: The MENABO Leopard XL Roof Bar set, showcasing its sleek aluminium design.
The MENABO Leopard XL Roof Bar system consists of two aluminium bars and four mounting feet designed to attach securely to your vehicle's roof. Its aerodynamic "blade" profile helps reduce wind noise and drag during travel.
- Materiál: High-quality Aluminium
- Fixing System: Quick and convenient profile blade fixing
- Aerodynamika: "Blade" profile for reduced drag
- Kapacita zatížení: Do 75 kg (165 liber)
Nastavení a instalace
Proper installation is crucial for the safety and performance of your roof bars. Follow these steps carefully.
- Rozbalte komponenty: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda jsou přítomny všechny součásti uvedené v dodacím listu.
- Identify Bar Orientation: The roof bars are designed with an aerodynamic profile. Ensure they are oriented correctly with the wider, leading edge facing forward.
- Připevnění montážních patek: Securely attach the mounting feet to the roof bars according to the specific instructions provided with your vehicle's fit kit (sold separately or included depending on vehicle model). The quick and convenient fixing system allows for straightforward attachment.
- Position on Vehicle Roof: Place the assembled roof bars onto your vehicle's roof. Refer to your vehicle's owner's manual or the fit kit instructions for the correct spacing and positioning points.
- Zajištění k vozidlu: Tighten the mounting feet securely to your vehicle's roof rails or designated mounting points. Ensure all bolts and clamps are firmly fastened. Do not overtighten.
- Zabezpečení testu: After installation, gently pull and push on the roof bars to ensure they are firmly attached and do not wobble. Re-check all fastenings after the first few miles of driving.
Obrázek 2: Detail view of the roof bar's mounting foot, showing the secure attachment mechanism.
Figure 3: The MENABO Leopard XL Roof Bars securely installed on a vehicle, ready for use.
Důležité bezpečnostní upozornění: Always adhere to the maximum load capacity of 75 kg (165 lbs) for the roof bars and your vehicle's roof. Exceeding this limit can lead to damage or accidents.
Návod k obsluze
Once installed, your MENABO Leopard XL Roof Bars are ready for use. Consider the following guidelines for optimal performance and safety:
- Rozložení zatížení: Distribute the load evenly across the roof bars. Place heavier items closer to the center of the vehicle.
- Zajištěné náklady: Always use appropriate straps, nets, or carriers to secure your cargo to the roof bars. Ensure items cannot shift, slide, or fall off during transit.
- Zkontrolujte vůli: Be mindful of increased vehicle height when carrying items on the roof, especially when entering garages, car washes, or low-clearance areas.
- Řidičské návyky: Adjust your driving speed and style when carrying a load on the roof. Avoid sudden braking, sharp turns, or high speeds, as this can affect vehicle stability.
- Pravidelné kontroly: Periodically check the security of the roof bars and the load during long journeys.
Údržba
Regular maintenance will extend the life of your MENABO Leopard XL Roof Bars.
- Čištění: Clean the aluminium bars and plastic components with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspekce: Periodically inspect all components for signs of wear, damage, or corrosion. Check bolts and fasteners for tightness.
- Skladování: If removing the roof bars for extended periods, store them in a dry, clean place away from direct sunlight and extreme temperatures.
- Mazání: Moving parts or locking mechanisms may benefit from occasional lubrication with a silicone-based spray.
Odstraňování problémů
Zde jsou některé běžné problémy a jejich možná řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Střešní nosiče se po instalaci zdají být uvolněné. | Upevňovací prvky nejsou dostatečně utažené. | Znovu utáhněte všechny montážní šrouby aamps according to the installation instructions. Ensure proper torque if specified. |
| Nadměrný hluk větru. | Incorrect bar orientation or improper sealing. | Ensure the "blade" profile is facing forward. Check if all end caps and rubber strips are properly seated. |
| Obtížnost při připevňování příslušenství. | T-slot channel obstructed or incompatible accessory. | Clear any debris from the T-slot channel. Ensure your accessory is compatible with the MENABO T-slot system. |
Pokud narazíte na problémy, které zde nejsou uvedeny, podívejte se prosím do sekce podpory.
Specifikace
Detailed technical specifications for the MENABO Leopard XL Roof Bar:
| Název modelu | Leopard XL |
| Číslo modelu | 000088600000 |
| Značka | MEANBO |
| Barva | Šedá |
| Materiál | Hliník |
| Rozměry položky (D x Š x V) | 53.15 x 5.91 x 3.74 palce (135 x 15 x 9.5 cm) |
| Rozměry produktu | 53.15 x 5.91 x 3.74 palce |
| Hmotnost položky | 9.46 libry (4.3 kg) |
| Kapacita zatížení | 75 kg (165 lb) |
| Typ montáže | On the roof |
| GTIN (globální identifikační číslo obchodu) | 08003168029052 |
| Výrobce | MEANBO |
| Země původu | Itálie |
Informace o záruce
MENABO products are manufactured to high standards. For specific warranty terms and conditions applicable to your Leopard XL Roof Bar, please refer to the warranty documentation included with your purchase or visit the official MENABO webZáruka se obvykle vztahuje na výrobní vady.
Note: Extended protection plans may be available from third-party providers, but these are separate from the manufacturer's warranty.
Zákaznická podpora
Should you require assistance with your MENABO Leopard XL Roof Bar, including installation queries, technical support, or parts replacement, please contact MENABO customer service or the authorized dealer from whom you purchased the product.
For the most up-to-date contact information, please visit the official MENABO webmísto: www.menabo.it
Při kontaktování podpory mějte prosím po ruce číslo modelu produktu (000088600000) a podrobnosti o nákupu.
