JHS Pedals Morning Glory V4 Overdrive Guitar Effects Pedal User Manual

Zavedení

The JHS Pedals Morning Glory V4 is a transparent overdrive pedal designed to enhance your guitar tone without altering its fundamental character. It provides a range of low to mid-gain overdrive, suitable for adding grit to clean tones, boosting existing crunch, or providing tube-like response to various amplifiers. This manual provides essential information for the setup, operation, and maintenance of your Morning Glory V4 pedal.

Bezpečnostní informace

• Use only a 9V DC negative center power supply. Incorrect voltage or polarity can damage the pedal and void the warranty.
• Do not expose the pedal to moisture or extreme temperatures.
• Avoid dropping the pedal or subjecting it to severe impacts.
• Disconnect power before cleaning or making any internal adjustments.

Obsah balení

• JHS Pedals Morning Glory V4 Overdrive Pedal
• 9V DC Negative Center Power Adapter
• Uživatelská příručka (tento dokument)

Ovládací prvky a připojení

Obrázek 1: Ovládací prvky na předním panelu. This image displays the top face of the JHS Morning Glory V4 pedal, featuring the Volume, Drive, and Tone control knobs, along with the two-position Gain toggle switch. The footswitch is located at the bottom center.

Obrázek 2: Úhlové View. An angled perspective of the pedal, highlighting the input and output jacks on the sides, as well as the main control knobs and footswitch.

Figure 3: Top Panel and Connections. Tento view shows the top edge of the pedal, where the 9V DC power input jack is located, along with the 1/4-inch audio input and output jacks on the sides.

Figure 4: Side Panel Features. A detailed close-up of the side of the pedal, illustrating the recessed Hi-Cut switch and the Remote Gain jack for external control.

Ovládání:

• Objem: Upravuje celkovou výstupní úroveň pedálu.
• Řídit: Controls the amount of overdrive/gain.
• Tón: Shapes the high-frequency content, from darker to brighter.
• Gain Toggle Switch: Selects between two distinct gain stages. The up position offers a lower gain setting, while the down position engages a higher gain setting.
• Hi-Cut Switch (Side-mounted): A recessed switch on the side of the pedal. Engaged (pushed in), it reduces high frequencies, useful for brighter amplifiers or guitars. Disengaged (out), it allows full high-frequency response.

Spojení:

• Input Jack (Right Side): Connect your guitar or the output of a preceding pedal here.
• Output Jack (Left Side): Připojte se k vašemu amplifier's input or the input of a subsequent pedal.
• 9V DC Power Input (Top): Connect a standard 9V DC negative center power supply.
• Remote Gain Jack (Side-mounted): Allows for external switching of the Gain Toggle Switch using a JHS Red Remote or similar latching footswitch.

Nastavení

1. Připojení napájení: Connect the included 9V DC negative center power adapter to the 9V DC input jack on the top of the pedal. Plug the adapter into a suitable power outlet. The pedal does not operate on battery power.
2. Audio připojení:
   • Connect your guitar (or the output of the previous pedal in your signal chain) to the Vstupní Jack on the right side of the Morning Glory V4.
   • Připojte Výstupní Jack on the left side of the Morning Glory V4 to your amplifier's input (or the input of the next pedal in your signal chain).
3. Počáteční nastavení: For a starting point, set the Volume, Drive, and Tone knobs to the 12 o'clock position. Set the Gain Toggle Switch to the up (lower gain) position. Ensure the Hi-Cut switch is disengaged (out).

Návod k obsluze

The Morning Glory V4 is designed to be highly versatile, offering a range of transparent overdrive tones. Experiment with the controls to find the sound that best suits your setup and playing style.

Sepnutí pedálu:

Press the footswitch to engage or bypass the effect. The LED indicator will illuminate when the pedal is active.

Nastavení overdrive:

• Knoflík pohonu: Turn clockwise for more overdrive, counter-clockwise for less.
• Gain Toggle Switch:
  • Pozice nahoře: Provides a lower gain setting, ideal for subtle breakup and transparent boost.
  • Dolní pozice: Engages a higher gain setting, offering more saturation and sustain.
• Remote Gain: If using an external latching footswitch connected to the Remote Gain jack, you can toggle between the two gain stages remotely.

Tvarování tónů:

• Tónový knoflík: Adjust clockwise to increase treble frequencies for a brighter sound, or counter-clockwise to decrease treble for a warmer, darker tone.
• Hi-Cut Switch: Engage this switch (push in) if your amplifier or guitar produces excessive high frequencies, or if you desire a smoother, less piercing tone. Disengage (pull out) for full high-frequency response.

Ovládání hlasitosti:

The Objem knob controls the overall output level. Use it to match the bypassed signal level or to provide a clean boost when the pedal is engaged.

Údržba

• Čištění: Otřete pedál měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Skladování: Pedál skladujte v suchém prostředí, mimo dosah přímého slunečního záření a extrémních teplot.
• Péče o kabely: Ensure all audio and power cables are in good condition to prevent signal loss or damage.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information and technical support, please refer to the official JHS Pedals webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

Official JHS Pedals Webmísto: www.jhspedals.com