KEF GFS-524 Speaker Stand Instruction Manual

Zavedení

The KEF GFS-524 Speaker Stands are designed to provide stable and acoustically optimized support for your bookshelf speakers, including the KEF LS50. These stands are constructed to match the aesthetic of KEF speakers and can be enhanced with inert filler for improved dampIng.

Bezpečnostní informace

• Během montáže se ujistěte, že jsou všechny součásti bezpečně upevněny, aby se zabránilo nestabilitě.
• Do not exceed the recommended weight capacity for the stands.
• Place stands on a level, stable surface to prevent tipping.
• Udržujte malé části mimo dosah dětí.

Obsah balení

Your KEF GFS-524 Speaker Stand package includes the following:

• 2 x Speaker Stands (unassembled components)
• Montážní materiál (šrouby, podložky atd.)
• Adjustable Spike Feet

Nastavení a montáž

Follow these steps to assemble your KEF GFS-524 Speaker Stands:

1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a zkontrolujte je podle seznamu obsahu balení.
2. Sestavte základnu: Attach the vertical columns to the base plate using the provided screws. Ensure all connections are tight and secure.
3. Připevněte horní desku: Secure the top plate to the vertical columns.
4. Install Spike Feet: Screw the adjustable spike feet into the bottom of the base plate. These can be adjusted to level the stand on uneven surfaces. For hardwood floors, consider purchasing separate protection disks.
5. Optional Inert Filler: The central column of the stand can be filled with non-resonant and non-magnetic inert filler (sold separately) for enhanced damping and stability. If filling, do so before attaching the top plate or ensure the filler port is accessible.

Obrázek 1: Rozložený view of KEF GFS-524 Speaker Stand components, showing the base, columns, and top plate.

Image 2: Fully assembled KEF GFS-524 Speaker Stand in Titanium finish, viewed zepředu.

Návod k obsluze

Once assembled, position your speaker stands in the desired location. Ensure the stands are level using the adjustable spike feet.

• Umístění reproduktorů: Carefully place your bookshelf speakers onto the top plate of the stands. For KEF LS50 speakers, you may need to remove their original rubber feet and place them on the stand's top corners to ensure a secure fit.
• Kontrola stability: Gently test the stability of the speaker and stand assembly before leaving it unattended.
• Optimal Listening: Adjust the position of the stands and speakers to achieve the best soundstage and imaging in your listening environment.

Image 3: KEF GFS-524 Speaker Stand supporting a KEF LS50 speaker, demonstrating proper speaker placement.

Údržba

• Čištění: Wipe the stands with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the finish.
• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevně utažené a bezpečné.
• Spike Adjustment: Re-adjust spike feet if the stand becomes uneven over time.

Odstraňování problémů

Issue: Missing or incorrect hardware.

Řešení: Contact KEF customer support immediately for replacement parts. Do not attempt to use alternative hardware that may compromise stability.

Issue: Stand is unstable or wobbly.

Řešení: Ensure all assembly screws are tightened. Adjust the spike feet on the base to level the stand on your floor surface. Verify the speaker is centered and stable on the top plate.

Issue: Speaker does not sit flush on the top plate.

Řešení: For some speakers, such as the KEF LS50, it may be necessary to remove the speaker's original rubber feet and place them on the corners of the stand's top plate to ensure a stable and flush fit.

Specifikace

Záruka a podpora

For warranty information, technical support, or to inquire about replacement parts, please contact KEF customer service. Refer to the official KEF webKonkrétní kontaktní údaje a záruční podmínky platné pro váš region naleznete na webových stránkách nebo v dokumentaci k nákupu.

Online podpora: www.kef.com/support