Oster Guide Comb Attachments Instruction Manual

Zavedení

This instruction manual provides essential information for the proper use and maintenance of your Oster Guide Comb Attachments. These attachments are designed to work with Oster Adjustable Clippers, specifically models 023, 830, 946, and 956, to achieve various hair cutting lengths.

The guide combs are made from durable plastic and are designed for easy attachment and removal, ensuring a secure fit during use.

Konec produktuview

Figure 1: A set of Oster guide comb attachments. These black plastic combs vary in length and feature evenly spaced teeth with a base designed for secure attachment to clipper blades.

The Oster Guide Comb Attachments are available in various sizes, including 1/8 inch, 1/4 inch, 3/8 inch, and 1/2 inch, allowing for precise control over hair length during grooming.

Nastavení a instalace

1. Select the Desired Comb: Choose the guide comb that corresponds to your desired hair cutting length. The combs are typically marked with their respective sizes (e.g., 1/8", 1/4", 3/8", 1/2").
2. Prepare the Clipper: Ensure your Oster Adjustable Clipper (Models 023, 830, 946, or 956) is clean and turned off before attaching any comb.
3. Připojte hřeben: Align the guide comb with the clipper blade. Gently push the comb onto the blade until it snaps securely into place. Ensure both sides of the comb are firmly seated on the clipper blade.
4. Ověření přílohy: Lightly tug on the comb to confirm it is securely attached and will not dislodge during use.
5. Odstraňte hřeben: To remove a guide comb, firmly grasp the comb and pull it straight off the clipper blade from the bottom. Avoid twisting or bending the comb during removal to prevent damage.

Note: No official seller videos demonstrating setup are available for this product. The instructions provided are based on common practice for similar clipper attachments.

Návod k obsluze

Once the desired guide comb is securely attached to your Oster clipper, you can begin the grooming process. The comb acts as a spacer, ensuring a consistent cutting length across the hair.

• Always start with a longer comb if you are unsure of the desired length, and then switch to a shorter comb if needed.
• Pro rovnoměrné zastřižení pohybujte zastřihovačem proti směru růstu chloupků.
• Use smooth, overlapping strokes to ensure all hair is cut to the desired length.
• Regularly clear any accumulated hair from the comb and clipper blades during use to maintain optimal performance.

Údržba

Proper maintenance of your guide combs will extend their lifespan and ensure consistent performance.

• Čištění: After each use, remove the guide comb from the clipper. Use a small brush (often included with clippers) to remove any trapped hair from the comb's teeth. You can also rinse the comb under cool running water. Ensure the comb is completely dry before storing or reattaching.
• Skladování: Store guide combs in a clean, dry place, preferably in their original packaging or a dedicated storage case, to prevent damage to the teeth.
• Inspekce: Periodically inspect the combs for any signs of wear, cracks, or broken teeth. Damaged combs should be replaced to prevent uneven cuts or potential injury.

Odstraňování problémů

• Comb does not attach securely: Ensure the comb is correctly aligned with the clipper blade and pushed firmly until it snaps into place. Verify that your clipper model is compatible with these Oster guide combs (Models 023, 830, 946, 956).
• Nerovnoměrný řez: This can be caused by a damaged comb, insufficient cleaning (hair trapped in teeth), or improper technique. Inspect the comb for damage, clean it thoroughly, and ensure you are using smooth, overlapping strokes against the direction of hair growth.
• Comb teeth bending or breaking: While made from durable plastic, excessive force or improper storage can damage the teeth. Handle combs with care and store them properly. Replace any damaged combs.

Specifikace

Note: The product title indicates a "2 Pack", while the general description refers to a set of various sizes. This manual covers the general use of Oster Guide Comb Attachments compatible with the specified models.

Informace o záruce

For specific warranty details regarding your Oster Guide Comb Attachments, please refer to the documentation included with your original purchase or visit the official Oster website. Warranty terms typically cover manufacturing defects and may vary by region and retailer.

Podpora a kontakt

If you require further assistance, have questions about your Oster Guide Comb Attachments, or need to purchase replacement parts, please contact Oster customer support. You can usually find contact information on the product packaging or the official Oster webmísto.

Pro více informací můžete navštívit Obchod Oster na Amazonu.