1. Úvod
This manual provides essential information for the safe and effective operation of your Steinel HL 1920 E Professional Heat Gun. This tool is designed for various applications requiring controlled hot air, featuring a 1500 Watt motor, variable temperature adjustment from 120 to 1,100 °F, and three-stage airflow control. It complies with applicable UL and RoHS standards, ensuring reliability and safety.
Image 1: Steinel HL 1920 E Professional Heat Gun. This image displays the heat gun from a three-quarter angle, highlighting its ergonomic design and nozzle.
2. Bezpečnostní pokyny
Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození:
- Před použitím nástroje si přečtěte všechny pokyny.
- Používejte vhodné osobní ochranné prostředky, včetně ochrany očí a rukavic.
- Ensure adequate ventilation in the work area to disperse fumes and hot air.
- Do not direct hot air at people or animals.
- Keep flammable materials away from the heat gun and the work area.
- The nozzle and accessories become extremely hot during use and remain hot for a period after shutdown. Avoid contact.
- Před čištěním nebo údržbou vždy odpojte napájení.
- Do not use the heat gun in damp nebo vlhké podmínky.
- Never block the air intake or output nozzles.
3. Konec produktuview a Komponenty
The Steinel HL 1920 E is engineered for comfort and durability. Key features include an ergonomic design, optimized weight balance for reduced fatigue, and an integrated support stand for hands-free operation. It is equipped with double insulation and a ceramic heating element designed to resist coil breakage.
Image 2: Key features of the Steinel HL 1920 E Heat Gun. This image highlights the extended delivery nozzle, built-in hanger, continuously variable temperature control, and 3-stage airflow switch.
Hlavní komponenty:
- Tryska: Standard 1.34-inch diameter for various attachments.
- Ovládání teploty: Dial for continuous temperature adjustment.
- Spínač proudění vzduchu: Three settings for air volume control.
- Zacházet s: Ergonomicky tvarované pro pohodlné uchopení.
- Integrated Support Stand: Allows for stable upright positioning.
- Napájecí kabel: Durable 6 ft. industrial rubber cord.
4. Nastavení
Before first use, ensure the heat gun is free from any packaging materials and inspect it for any visible damage. The tool is ready for immediate use upon connection to a suitable power source.
- Připojení napájení: Plug the 6 ft. industrial rubber power cord into a standard electrical outlet. Ensure the voltage odpovídá požadavkům nástroje.
- Nástavec trysky (volitelné): If your application requires a specific nozzle, ensure it is compatible with the 1.34-inch industry standard opening. Attach it securely before powering on the device.
5. Návod k obsluze
Zapnutí/vypnutí:
Locate the power switch on the handle. Move the switch to the 'On' position to activate the heat gun. Move it to 'Off' to power down.
Nastavení teploty:
The temperature can be adjusted in nine steps, ranging from 120 °F to 1100 °F. Use the temperature control dial to select the desired heat level for your specific task.
Ovládání proudění vzduchu:
The heat gun offers three airflow settings:
- Nastavení 1: 4 CFM (kubických stop za minutu)
- Nastavení 2: 4-8 CFM (Variable)
- Nastavení 3: 6-13 CFM (Variable)
Select the appropriate airflow setting using the control switch based on the material and application.
Thermal Cut-Out:
The tool is equipped with an automatic thermal cut-out feature to protect it from overheating. If the tool becomes too hot, it will temporarily shut down. Allow it to cool before resuming operation.
Hands-free provoz:
Utilize the integrated support stand to position the heat gun upright, allowing for hands-free use during tasks that require both hands.
6. Aplikace
The Steinel HL 1920 E is a versatile tool suitable for a wide range of tasks:
- Smršťovací fólie
- Rozmrazování zmrzlých trubek
- Odstranění nátěru
- Welding sheeting and plastics
- Drying plaster work
- Shrinking tubes and solder sleeves
- Disordering and soldering components from circuit boards
Image 3: Various applications of the Steinel HL 1920 E Heat Gun. This collage shows the heat gun being used for tasks such as heat shrinking, paint stripping, and soldering.
Image 4: Heat gun in use on a car bumper. This image illustrates the heat gun being used for a task on an automotive component, likely for plastic repair or paint removal.
Image 5: Heat gun in use for electrical wiring. This image shows the heat gun being applied to a wall opening with electrical wires, suggesting use for heat shrinking or drying.
7. Údržba
Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vaší horkovzdušné pistole.
- Čištění: Ensure the tool is unplugged and completely cool before cleaning. Wipe the exterior with a damp cloth. Keep the air intake and output nozzles free from dust and debris.
- Skladování: Store the heat gun in a dry, safe place, away from direct sunlight and extreme temperatures.
- Inspekce: Periodically inspect the power cord for any signs of damage. If damaged, have it replaced by a qualified technician.
8. Řešení problémů
If you encounter issues with your heat gun, refer to the following common troubleshooting steps:
- Nástroj se nezapíná: Check the power connection and ensure the outlet is functional. Verify the power switch is in the 'On' position.
- Insufficient heat or airflow: Ensure the temperature and airflow settings are correctly adjusted for your task. Check that the air intake and output nozzles are not obstructed.
- Tool shuts off during use: The thermal cut-out may have activated due to overheating. Unplug the tool and allow it to cool down completely before resuming operation. Ensure proper ventilation.
If problems persist, contact Steinel customer support or a qualified service technician.
9. Specifikace
| Funkce | Specifikace |
|---|---|
| Model | HL 1920 E |
| Číslo modelu položky | 110025596 |
| Moc | 1500 W, 13.2 Amp |
| Teplotní rozsah | 120 - 1100 °F (9 steps) |
| Nastavení proudění vzduchu | 3 (4 CFM, 4-8 CFM, 6-13 CFM) |
| Nozzle Compatibility | 1.34 inch industry standard |
| Délka kabelu | 6 ft. industrial rubber |
| Rozměry produktu | 13 x 12 x 4.3 palce |
| Hmotnost | 1.9 libry |
| Výrobce | Steinel |
| Bezpečnostní normy | UL, RoHS compliant |
10. Záruka a podpora
For detailed warranty information, please refer to the documentation included with your product or visit the official Steinel website. For technical support, replacement parts, or service inquiries, please contact Steinel customer service directly.
Výrobce: Steinel
Webmísto: www.steinel.net (Please note: This is a generic placeholder link as specific support links were not provided.)
