Návod k použití

1. Úvod

The Einhell Electric Paint Gun TC-SY 500 P is a versatile tool designed for spraying lacquers and stains. Its powerful 500 W motor and 1000 ml tank capacity make it suitable for various painting tasks, offering an adjustable flow rate of up to 500 ml/minute. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your paint gun.

Figure 1: Einhell Electric Paint Gun TC-SY 500 P with included accessories. This image shows the main unit, the paint container, and various cleaning and adjustment tools.

2. Bezpečnostní pokyny

Always observe the following safety precautions when operating the paint gun:

• Před použitím si pečlivě přečtěte všechny pokyny.
• Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and a respirator, especially when spraying paints or chemicals.
• Ensure adequate ventilation in the work area to prevent accumulation of hazardous fumes.
• Nestříkejte hořlavé kapaliny v blízkosti otevřeného ohně, zapalovacích plamenů nebo jiných zdrojů zapálení.
• Udržujte děti a domácí zvířata mimo pracovní oblast.
• Před čištěním, seřizováním nebo prováděním údržby odpojte napájení.
• Neponořujte motorovou jednotku do vody nebo jiných kapalin.
• Use only recommended thinning agents for your paint material.

3. Nastavení a příprava

Before operating the paint gun, ensure proper assembly and paint preparation.

3.1 Vybalení a komponenty

Carefully unpack all components. The package should include:

• Main spray gun unit
• Paint container (1000 ml)
• Viskozitní kalíšek
• Cleaning brush and needle
• Nozzles (various sizes/types)
• Návod k použití
• Gun Lubricant
• Adaptér trysky
• Filtr
• Náhradní těsnění

Figure 2: Close-up of various accessories including cleaning tools, nozzles, and the viscosity cup. These tools are essential for preparing paint and maintaining the spray gun.

3.2 Příprava a viskozita barvy

Proper paint viscosity is crucial for optimal spraying. Use the included viscosity cup to test your paint:

1. Barvu důkladně promíchejte.
2. Fill the viscosity cup with paint.
3. Measure the time it takes for the paint to completely drain from the cup. Refer to your paint manufacturer's recommendations for ideal viscosity or the paint gun's manual for general guidelines.
4. If the paint is too thick, dilute it gradually with the appropriate thinner (e.g., water for water-based paints, mineral spirits for oil-based paints) and re-test until the desired viscosity is achieved.
5. Strain the prepared paint using the included strainer to remove any lumps or debris that could clog the nozzle.

3.3 Filling the Paint Container

Once the paint is prepared:

1. Unscrew the paint container from the spray gun unit.
2. Pour the prepared and strained paint into the container, ensuring not to overfill (do not exceed the maximum fill line).
3. Securely screw the paint container back onto the spray gun unit.

4. Návod k obsluze

Follow these steps for effective operation of your Einhell paint gun.

4.1 Nastavení rozstřikovacích vzorů

The TC-SY 500 P allows for vertical, horizontal, and circular jet patterns. This is adjusted by rotating the air cap on the front of the gun.

• Horizontal Fan Pattern: Rotate the air cap so the "ears" are horizontal. Ideal for spraying up and down.
• Vertical Fan Pattern: Rotate the air cap so the "ears" are vertical. Ideal for spraying side to side.
• Circular Pattern: Rotate the air cap so the "ears" are diagonal. Ideal for small areas or detailed work.

Figure 3: Illustration of how to adjust the spray pattern (horizontal, vertical, circular) by rotating the nozzle cap. This visual guide helps in selecting the appropriate spray shape for different applications.

4.2 Flow Rate Control

The paint gun features a flow control knob, typically located near the trigger. Turn the knob to increase or decrease the paint flow. Always test the flow on a scrap piece of material before applying to your main project.

4.3 Technika stříkání

1. Hold the gun perpendicular to the surface, approximately 6-10 inches away.
2. Start spraying off the work piece, move across the surface at a consistent speed, and release the trigger off the work piece.
3. Pro zajištění rovnoměrného pokrytí překryjte každý průchod asi o 50 %.
4. Apply multiple thin coats rather than one thick coat to avoid drips and achieve a smoother finish.

5. Údržba a čištění

Regular cleaning and maintenance are essential for the longevity and performance of your paint gun.

5.1 Po každém použití

1. Odpojte napájení.
2. Empty any remaining paint from the container back into its original can or a waste container.
3. Pour a small amount of appropriate cleaning solution (water for water-based paints, thinner for oil-based paints) into the container.
4. Spray the cleaning solution through the gun until it runs clear.
5. Unscrew the paint container and disassemble the nozzle and air cap.
6. Use the included cleaning brush and needle to thoroughly clean all paint-contacting parts, including the nozzle, air cap, and suction tube.
7. Rinse all parts with clean water (if applicable for the cleaning solution used) and allow them to dry completely.
8. Apply a small amount of the provided gun lubricant to moving parts and seals as instructed in the detailed manual.
9. Sestavte pistoli.

5.2 Skladování

Store the clean and dry paint gun in a cool, dry place, away from direct sunlight and extreme temperatures.

6. Řešení problémů

V této části naleznete běžné problémy a jejich řešení.

7. Specifikace

Key technical specifications for the Einhell Electric Paint Gun TC-SY 500 P:

• Název modelu: TC-SY 500 P
• Zdroj napájení: Elektrický
• Výkon motoru: 500 W
• Objem nádrže: 1000 ml (1 litr)
• Max. Průtok: 500 ml/minute
• Materiál: Plast
• Barva: Červený
• Hmotnost položky: 1.26 kilogramů (2.77 liber)
• Rozměry produktu: 12.13 x 5.28 x 11.61 palce
• Doporučená použití: Painting (Lacquers and Stains)
• Zahrnuté komponenty: Instruction Guide, Gun Lubricant, Measuring Cap, Nozzle, Viscosity Cup, Nozzle Adapter, Strainer, Replacement Seal, Cleaning Kit

8. Záruka a podpora

For warranty information, technical support, or spare parts, please refer to the detailed instruction guide included with your product or contact Einhell customer service. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, visit the official Einhell webnebo se obraťte na jejich autorizovaná servisní střediska.