Zavedení
This manual provides essential instructions for the proper use and maintenance of your Candy EasyCase water tank for tumble dryers. The EasyCase is an innovative water collection system designed for convenience and efficiency, holding up to 5 litres of condensed water.
Its design allows for easy removal, carrying, and emptying, with a visible water level indicator to prevent interruptions during drying cycles. This product is an original part supplied by CANDY, ensuring compatibility and quality.
Konec produktuview
Obrázek 1: Nahoře view of the Candy EasyCase water tank, showing the integrated handle and transparent design for visible water level.
Obrázek 2: Spodní část view of the Candy EasyCase water tank, illustrating its compact and ergonomic shape.
Nastavení a instalace
The Candy EasyCase water tank is designed for straightforward installation into compatible tumble dryer models. Refer to your tumble dryer's main instruction manual for specific guidance on accessing and replacing the water collection system.
- Unpack the EasyCase: Carefully remove the new EasyCase water tank from its packaging. Inspect for any damage.
- Locate the Existing Water Tank: On your compatible tumble dryer, identify the location of the current water collection tank. The EasyCase is typically built into the dryer's window or a designated compartment.
- Remove the Old Tank (if applicable): If replacing an existing tank, gently pull or slide it out. Ensure it is empty before removal to prevent spills.
- Insert the New EasyCase: Align the new EasyCase tank with the designated slot or opening in your tumble dryer. Push it firmly but gently until it clicks securely into place. Ensure it is fully seated to prevent leaks and ensure proper water collection.
- Ověřte instalaci: After installation, ensure the tank is stable and does not wobble. The water level should be visible through the transparent material.
Poznámka: If the tank does not fit correctly, double-check the compatibility list in the "Compatibility" section of this manual and your tumble dryer's model number.
Návod k obsluze
The EasyCase system collects condensed water during the drying cycle. Its transparent design allows for easy monitoring of the water level.
Monitoring Water Level
- The water level in the EasyCase is always visible, eliminating the need to interrupt a drying cycle to check.
- The tank has a 5-litre capacity, designed to hold water from multiple drying cycles before needing to be emptied.
Vyprázdnění vodní nádrže
- Remove the Tank: Grasp the ergonomic handle of the EasyCase and gently pull it out from its compartment in the tumble dryer.
- Carry and Empty: The compact design and handle make it easy to carry the full tank. Use the practical pouring spout to empty the collected water into a sink or other suitable container.
- Přemístění: Once emptied, slide the EasyCase back into its position in the tumble dryer until it is securely seated.
Water Reuse: The collected condensed water is suitable for various household uses, such as watering plants, general household cleaning, or ironing, contributing to water saving.
Údržba
Regular cleaning of the EasyCase water tank is recommended to prevent the buildup of residue and maintain hygiene.
- Frekvence: Clean the tank periodically, or if you notice any residue or odor.
- Postup čištění:
- Remove the EasyCase from the tumble dryer.
- Vylijte veškerou zbývající vodu.
- Rinse the tank thoroughly with warm water.
- For stubborn residue, use a mild detergent and a soft brush. Avoid abrasive cleaners or harsh chemicals.
- Rinse again to ensure all detergent is removed.
- Allow the tank to air dry completely before reinserting it into the tumble dryer.
Odstraňování problémů
This section addresses common issues you might encounter with your EasyCase water tank.
- Tank does not fit or is difficult to insert:
- Ensure you have the correct EasyCase model for your tumble dryer. Refer to the "Compatibility" section.
- Check for any obstructions in the dryer's compartment where the tank is inserted.
- Ensure the tank is aligned correctly before pushing it into place. Do not force it.
- Water is not collecting in the tank:
- Verify that the EasyCase is fully and correctly seated in its compartment.
- Check your tumble dryer's main manual for instructions on its condensation system.
- Ensure the dryer is operating correctly and producing condensation.
- Water leaks from the tank:
- Ensure the tank is not cracked or damaged. If damaged, it requires replacement.
- Verify the tank is correctly inserted and sealed in its compartment.
Kompatibilita
The Candy EasyCase water tank (Models 40009648, 40008542) is compatible with a range of Hoover and Candy tumble dryers. Please verify your dryer's model number against the list below:
- CSE C9DE-47
- CSOE H9A2DE-S
- CSOE H10A2TE-S
- CSOE H10A2DE-S
- CSOE C10TE-47
- CSOE H11A2TE-S
- CSE H8A3DE-47
- CSE H10A1LE-47
- CSOE 8A2DE-S
- CSOE H10A2DE-47
- TOE H8A2DEM-S
- CSE H8A1LE-S
- BCTD H7A1TE-S
- CSE H9A2DE-47
- CSOE H8A2DE-47
- TOE H8A2LEM-S
- CSE H9A1LE-S
- NDE H8A2TSEXS-S
- CHP H8A3DE-47
This list is based on information provided by the manufacturer. If your model is not listed, please contact Candy customer support for verification.
Specifikace
| Funkce | Detail |
|---|---|
| Značka | BONBÓN |
| Čísla modelů | 40009648, 40008542 |
| Kapacita | 5 litru |
| Hmotnost položky | 1.3 kg |
| Jsou vyžadovány baterie | Žádný |
| Materiál | Transparent plastic (for visible water level) |
Záruka a podpora
For warranty information or technical support regarding your Candy EasyCase water tank, please refer to the documentation provided with your tumble dryer or contact Candy customer service directly. As an original part, it is covered by the manufacturer's standard warranty terms.
You can typically find contact details for Candy customer support on their official website or in your tumble dryer's user manual.
