Yorkville NX35-2

Uživatelská příručka k 12palcovému 2pásmovému pasivnímu reproduktoru Yorkville NX35-2

Model: NX35-2 | Brand: Yorkville

1. Úvod a konecview

This manual provides essential information for the proper setup, operation, and maintenance of your Yorkville NX35-2 12-Inch 2-Way Passive Speaker. The NX35-2 is an advanced molded loudspeaker designed for high-efficiency sound reproduction. It features a deep-excursion 12-inch woofer capable of handling 500 watts, paired with a 1-inch compression driver mounted on a custom 80° x 50° ABS waveguide horn. Its design ensures balanced overall response and robust low-frequency output.

Yorkville NX35-2 12-Inch 2-Way Passive Speaker, front view

Obrázek 1.1: Přední view of the Yorkville NX35-2 passive speaker, showcasing its protective grille and compact design.

2. Bezpečnostní informace

3. Vlastnosti produktu

4. Nastavení

4.1 Vybalení

Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. If damage is found, contact your dealer immediately. Retain the original packaging for future transport or storage.

4.2 Umístění

The Yorkville NX35-2 is designed for versatile placement, including floor monitoring (wedge), pole mounting, or suspension. Ensure the speaker is placed on a stable, level surface or securely mounted using appropriate hardware. For optimal sound dispersion, consider the audience area and room acoustics. Avoid placing speakers directly against walls or in corners, which can lead to exaggerated bass response.

4.3 Připojení

As a passive speaker, the NX35-2 requires an external power ampživější.

  1. Moc AmpVýběr čističe: Vyberte si sílu amplifier that can deliver sufficient power to the NX35-2 (up to 500 watts) at its nominal impedance. Ensure the amplifier's output impedance matches the speaker's impedance.
  2. Speaker Cable: Use high-quality, appropriately gauged speaker cables with secure connectors (e.g., Speakon or 1/4-inch TS, depending on the speaker's input connectors). Ensure the cable length is minimized to reduce signal loss.
  3. Připojování k Ampživější: s amplifier turned OFF and its volume controls set to minimum, connect one end of the speaker cable to the input connector on the NX35-2. Connect the other end to the corresponding output channel on your power amplifier. Ensure correct polarity (+ to + and - to -) if using bare wire connections.
  4. Multiple Speakers: If connecting multiple NX35-2 speakers, consult your amplifier's manual for proper wiring configurations (e.g., parallel or series) to maintain a safe impedance load for the ampživější.

5. Návod k obsluze

  1. Počáteční zapnutí: After all connections are made, turn on your audio source (mixer, instrument, etc.), then your power ampzáchranář. Začněte s amplifier's volume at its lowest setting.
  2. Nastavení hlasitosti: Postupně zvyšujte amplifier's volume to the desired listening level. Monitor the sound for any distortion. If distortion occurs, reduce the volume.
  3. System Gain Staging: Zajistěte správný zisktaging throughout your audio chain (source, mixer, processor, amplifier) to prevent clipping and maximize signal-to-noise ratio.
  4. Power Down Sequence: Po dokončení snižte amphlasitost zařízení a poté jej vypněte amplifier, followed by your audio source. This prevents loud pops or thumps through the speakers.

6. Údržba

7. Řešení problémů

ProblémMožná příčinaŘešení
Žádný zvuk z reproduktoru
  • Ampzáchranář není zapnutý
  • Nesprávné připojení kabelu
  • Vadný kabel reproduktoru
  • Amplifier volume too low
  • Problém se zdrojem zvuku
  • Zajistit amplifier is on and functioning
  • Verify speaker cable is securely connected to both speaker and ampdoživotní
  • Test with a different speaker cable
  • Zvýšení amplifier volume gradually
  • Check audio source (mixer, player) for output
Zkreslený zvuk
  • Amplifier overdriven (clipping)
  • Přebuzený reproduktor
  • Incorrect impedance match
  • Vadný kabel
  • Snížit amplifier volume or input gain
  • Zajistit amplifier power matches speaker rating
  • Ověřte amplifier and speaker impedance compatibility
  • Replace speaker cable
Nízká hlasitost výstupu
  • Amplifier volume too low
  • Low signal from audio source
  • Nesprávný ampnastavení zvlhčovače
  • Zvýšení ampobjem čističky
  • Check output level of audio source
  • Review amplifier settings (e.g., input sensitivity)

8. Specifikace

FunkceDetail
Název modeluNX35-2
Typ reproduktoru2-Way Passive Speaker (Woofer, Compression Driver)
Průměr basového reproduktoru12 palce
Ovladač komprese1 palce
Vlnovodný rohCustom 80° x 50° ABS
Maximální výstupní výkon reproduktoru500 wattů
Doporučená použitíFor Studios, On Stage, High-Performance Sound Systems
Technologie připojeníPower cord (for amplifier connection, speaker itself is passive)
Režim zvukového výstupuStereo (při použití ve dvojicích)
Typ montážeWedge, Pole Mountable
Hmotnost položky70 libry (přibližně 31.75 kg)
Rozměry balení27 x 16 x 13 palců (přibližně 68.6 x 40.6 x 33 cm)
VýrobceYorkville
UPC840402034438

9. Informace o záruce

The Yorkville NX35-2 speaker comes with a Omezená záruka. For detailed information regarding the terms, conditions, and duration of your warranty, please refer to the official Yorkville website or contact Yorkville customer support directly. Keep your proof of purchase for warranty claims.

10. Zákaznická podpora

Should you encounter any issues not covered in this manual, or require further assistance, please contact Yorkville customer support. You can typically find contact information, including phone numbers and email addresses, on the official Yorkville webmísto.

Související dokumenty - NX35-2

Předview Servisní manuál Yorkville EF215P
Tato servisní příručka obsahuje podrobné technické informace, schémata, specifikace a bezpečnostní pokyny pro aktivní reproduktor Yorkville EF215P. Je určena pro kvalifikovaný servisní personál.
Předview Servisní manuál k aktivnímu mixážnímu pultu Yorkville MP6T 325 Wattů, 6 kanálů.
Komplexní servisní manuál pro 6kanálový aktivní mixážní pult Yorkville MP6T 325 Watt, včetně kontaktních informací, seznamů dílů, popisů schémat, výrobních poznámek a historie databáze.
Předview Servisní manuál Yorkville YSM8 - Specifikace, diagramy a schémata
Podrobná servisní příručka pro reproduktor Yorkville YSM8, která obsahuje základní bezpečnostní informace, technické specifikace, bloková schémata a schémata zapojení pro údržbu a opravy.
Předview Yorkville YS1081 Acoustic Master Standardní servisní manuál
Servisní manuál pro Yorkville YS1081 Acoustic Master Standard ampservisní technik, který poskytuje technické specifikace, seznamy dílů, bloková schémata a schémata pro servis a opravy.
Předview Yorkville YX10P 200W Active Loudspeaker Owner's Manual
Comprehensive owner's manual for the Yorkville YX10P 200W active loudspeaker enclosure, covering safety instructions, product features, controls, connections, technical specifications, and warranty information.
Předview Servisní manuál Yorkville YXL TOWER10 a YXL TOWER12
Oficiální servisní manuál pro profesionální audio PA reproduktorové systémy Yorkville YXL TOWER10 a YXL TOWER12. Obsahuje podrobná schémata, technické specifikace, bezpečnostní pokyny a postupy odstraňování problémů pro efektivní údržbu a opravy.