CANDY SUPERIRE Dishwasher Spray Arm

Zavedení

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Candy SUPERIRE Dishwasher Spray Arm. This original manufacturer part is designed to ensure optimal washing performance in compatible Candy dishwasher models. Please read this manual carefully before installation and use to ensure proper function and longevity of the part.

Obrázek 1: The Candy SUPERIRE Dishwasher Spray Arm. This image shows the light grey plastic spray arm, curved in shape, with a central mounting hub and multiple small spray nozzles along its length. The hub has a threaded or snap-on connection point.

Pokyny k instalaci

The Candy SUPERIRE Dishwasher Spray Arm is a replacement part. Installation typically involves removing the old spray arm and attaching the new one. Always ensure the dishwasher is disconnected from power before attempting any installation or maintenance.

1. Odpojit napájení: Odpojte myčku nádobí z elektrické zásuvky nebo vypněte jistič, který myčku napájí.
2. Otevřete dvířka myčky: Pro přístup do vnitřku myčky zcela otevřete dvířka.
3. Remove Dish Racks: Carefully remove the lower dish rack to provide clear access to the spray arm.
4. Demontáž starého ostřikovacího ramene:
   • Depending on your dishwasher model, the spray arm may be held in place by a retaining nut, a clip, or simply snap onto a water supply tube.
   • For threaded connections, unscrew the retaining nut counter-clockwise.
   • For snap-on connections, gently pull or twist the spray arm to release it from its mounting post.
   • Retain any washers or seals from the old spray arm if they are not integrated into the new part.
5. Instalace nového ostřikovacího ramene:
   • Align the new Candy SUPERIRE spray arm with the water supply tube or mounting post.
   • If it's a threaded connection, screw the retaining nut clockwise until snug. Do not overtighten.
   • If it's a snap-on connection, push the spray arm firmly onto the post until it clicks into place.
   • Ensure the spray arm can rotate freely without obstruction.
6. Replace Dish Racks: Carefully place the lower dish rack back into position.
7. Obnovit napájení: Plug the dishwasher back into the electrical outlet or turn on the circuit breaker.
8. Test funkčnosti: Run a short rinse cycle to confirm the spray arm rotates and sprays water correctly.

For specific dishwasher model instructions, refer to your dishwasher's main user manual.

Provozní úvahy

While the spray arm itself does not have operational controls, its effective function depends on proper dishwasher usage:

• Správné načítání: Ensure dishes, especially tall items or large platters, do not obstruct the rotation of the spray arm. Improper loading can prevent the spray arm from spinning, leading to poor cleaning results.
• Clear Nozzles: Periodically check the small holes (nozzles) on the spray arm for any food particles or mineral deposits that might be blocking them. Blocked nozzles reduce water pressure and cleaning effectiveness.
• Použití pracího prostředku: Use the recommended amount and type of dishwasher detergent. Excessive suds can interfere with spray arm rotation.

Údržba

Regular maintenance of your spray arm ensures optimal cleaning performance:

1. Pravidelná kontrola: Visually inspect the spray arm monthly for any signs of cracks, damage, or blockages in the nozzles.
2. Čisticí trysky: If nozzles are blocked, remove the spray arm (refer to installation steps) and use a small, pointed object (like a toothpick or straightened paper clip) to clear the debris from each hole. Rinse the spray arm thoroughly under running water.
3. Odstraňování minerálních usazenin: If you have hard water, mineral deposits can build up. Soak the spray arm in a solution of white vinegar and water (1:1 ratio) for 30 minutes to an hour, then scrub gently with a brush and rinse.
4. Zkontrolujte rotaci: After cleaning, ensure the spray arm spins freely when reinstalled.

Odstraňování problémů

If you experience issues related to the spray arm, consider the following:

• Poor Cleaning Results (Dishes not clean):
  • Check if the spray arm is obstructed by dishes or cutlery.
  • Inspect spray arm nozzles for blockages (food particles, mineral deposits). Clean as per maintenance instructions.
  • Ujistěte se, že je rozprašovací rameno bezpečně upevněno a může se volně otáčet.
  • Verify water pressure to the dishwasher is adequate.
• Spray Arm Not Spinning:
  • Confirm no dishes or items are blocking its rotation.
  • Check for debris around the central hub where the spray arm attaches.
  • Ensure the spray arm is correctly installed and seated.
• Unusual Noise During Cycle:
  • The spray arm might be hitting an item in the dishwasher. Rearrange dishes.
  • Check for loose components or cracks on the spray arm itself. If cracked, replacement is necessary.

If issues persist after troubleshooting, it may indicate a problem with other dishwasher components or require professional service.

Specifikace produktu

Informace o záruce

As an original manufacturer part, this Candy SUPERIRE Dishwasher Spray Arm is typically covered by the manufacturer's standard spare parts warranty. Warranty terms and duration may vary by region and purchase date. Please retain your proof of purchase. For detailed warranty information, refer to the documentation provided with your original dishwasher appliance or contact Candy customer support directly.

Zákaznická podpora

For further assistance, technical support, or to inquire about service, please contact Candy customer support. Have your product model number (49017957) and dishwasher model information ready when contacting support.

You can typically find contact information on the official Candy website or in the user manual that came with your dishwasher appliance.