SE ELECTRONICS V3 Handheld Cardioid Microphone

Zavedení

The SE ELECTRONICS V3 is a robust, all-purpose handheld dynamic microphone designed for clear and reliable audio capture. Featuring a cardioid polar pattern, it is optimized for vocal and speech applications, effectively rejecting off-axis sound. Its durable construction ensures consistent performance in various environments.

Co je v krabici

• V3 Handheld Cardioid Microphone
• Klip na mikrofon
• Spare Internal Windscreen
• Závitový adaptér
• Vak

Klíčové vlastnosti

• Frekvenční rozsah: 50 Hz až 16 kHz
• Neodymový magnet: For high output and consistent performance
• Copper Voice Coil: Ensures clear signal transmission
• Citlivost: 2.5 mV/Pa
• Impedance: 600 ohmů
• Jednosměrný polární vzor: Focuses on sound from the front, reducing background noise
• Odolná konstrukce: Made from Alloy Steel, Copper, and Zinc

Nastavení

Follow these steps to set up your SE ELECTRONICS V3 microphone:

1. Připevnění klipu pro mikrofon: Securely screw the provided microphone clip onto a standard microphone stand.
2. Držák mikrofonu: Insert the V3 microphone into the microphone clip. Ensure it is firmly seated.
3. Připojení kabelu XLR: Connect a standard XLR cable to the microphone's XLR output port at the base. Connect the other end of the XLR cable to your audio interface, mixer, or compatible device.
4. Zapnutí: Ensure your connected audio device is powered on and configured to receive input from the microphone. The V3 is a dynamic microphone and does not require phantom power.

Návod k obsluze

The V3 microphone is designed for optimal performance in singing and speech applications. Its unidirectional (cardioid) polar pattern means it is most sensitive to sounds coming from directly in front of it, and least sensitive to sounds from the sides and rear. This helps to minimize background noise and feedback.

• Umístění mikrofonu: For vocals, hold the microphone approximately 2-6 inches from your mouth. Experiment with distance to achieve the desired tone and to control plosives (harsh 'p' and 'b' sounds).
• Ziskytaging: Adjust the gain on your mixer or audio interface to achieve a strong signal without clipping (distortion). Start with the gain low and gradually increase it while speaking or singing into the microphone.
• Kontrola zpětné vazby: Due to its cardioid pattern, aim the microphone away from loudspeakers or monitors to reduce the chance of feedback.
• Manipulační hluk: While the V3 is designed for durability, excessive handling can introduce noise. For stationary use, a microphone stand is recommended.

Údržba

Proper care will extend the life and performance of your V3 microphone:

• Čištění: Use a soft, dry cloth to wipe the microphone body. For the grille, you can gently brush away debris. Avoid using liquid cleaners directly on the grille or capsule.
• Skladování: When not in use, store the microphone in its provided pouch to protect it from dust and physical damage.
• Podmínky prostředí: Avoid exposing the microphone to extreme temperatures, high humidity, or direct moisture.
• Péče o kabely: Always disconnect XLR cables by gripping the connector, not the cable itself, to prevent damage to the pins and cable.

Odstraňování problémů

If you encounter issues with your V3 microphone, consider the following:

• Žádný zvuk:
  • Ensure the XLR cable is securely connected at both the microphone and the audio device.
  • Verify that the input channel on your mixer or interface is selected and its gain is appropriately set.
  • Test with a different XLR cable or audio input channel if available.
• Nízká hlasitost nebo slabý signál:
  • Increase the gain on your audio device.
  • Ujistěte se, že je mikrofon správně umístěn a dostatečně blízko zdroje zvuku.
  • Check that the microphone's impedance (600 ohms) is compatible with your audio input.
• Zkreslený zvuk:
  • Reduce the gain on your audio device.
  • Ujistěte se, že mikrofon není přetížen nadměrně hlasitými zdroji zvuku.
• Excessive Background Noise or Feedback:
  • Reposition the microphone to point directly at the sound source and away from noise sources or loudspeakers.
  • Adjust monitor levels or speaker placement.

Specifikace

Záruka a podpora

For warranty information and technical support, please refer to the official SE ELECTRONICS webnebo se obraťte na autorizovaného prodejce. Uschovejte si doklad o koupi pro případné reklamace.

You can visit the official SE ELECTRONICS store for more information: SE ELECTRONICS Store