Uživatelská příručka ke čtečce čárových kódů CipherLab 1500P HP

1. Úvod

This user manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your CipherLab 1500P HP 1D Corded Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its lifespan. Keep this manual for future reference.

2. Konec produktuview

The CipherLab 1500P HP is a high-performance 1D corded barcode scanner designed for efficient data capture. It comes with a USB cable for connectivity and an autosense stand for hands-free operation.

Obrázek 2.1: CipherLab 1500P HP barcode scanner placed in its autosense stand. The scanner is black with a yellow trigger button, and the stand is also black, providing a stable base for the scanner.

Obsah balení:

• CipherLab 1500P HP Barcode Scanner
• USB propojovací kabel
• Autosense Stand
• This User Manual (or link to digital version)

3. Nastavení

1. Rozbalte zařízení: Carefully remove the barcode scanner, USB cable, and autosense stand from their packaging.
2. Připojte kabel USB:
   • Locate the USB port on the base of the barcode scanner.
   • Insert the smaller end of the USB cable into the scanner's port.
   • Insert the larger USB-A end of the cable into an available USB port on your host computer or point-of-sale (POS) system.
3. Instalace ovladače (Plug & Play): The CipherLab 1500P HP is typically a plug-and-play device. Your operating system should automatically detect and install the necessary drivers. Wait for the installation to complete (usually indicated by a notification).
4. Position the Autosense Stand: Place the autosense stand on a stable, flat surface. The stand is designed to hold the scanner in an optimal position for hands-free scanning.
5. Place Scanner in Stand: Gently place the barcode scanner into the autosense stand. Ensure it is securely seated. The scanner will automatically switch to presentation mode when placed in the stand, allowing it to detect and scan barcodes without pressing the trigger.
6. Test připojení: Open a text editor (e.g., Notepad, WordPad) or a compatible application on your computer. Scan a known barcode. The scanned data should appear in the text editor, confirming successful setup.

4. Návod k obsluze

Ruční režim:

• Remove the scanner from the autosense stand.
• Namiřte skenovacím okénkem na čárový kód, který chcete naskenovat.
• Press and hold the yellow trigger button. A red scanning line will emit from the scanner.
• Position the scanner so the red line crosses the entire barcode.
• Once the barcode is successfully read, the scanner will emit an audible beep and/or a visual indicator (e.g., LED flash). The data will be transmitted to your connected device.
• Uvolněte spoušť.

Autosense (Presentation) Mode:

• Ensure the scanner is securely placed in the autosense stand.
• Hold the barcode in front of the scanner's window.
• The scanner will automatically detect the barcode and activate its scanning engine.
• Once the barcode is successfully read, the scanner will emit an audible beep and/or a visual indicator. The data will be transmitted to your connected device.

Tipy pro skenování:

• Ujistěte se, že čárový kód je čistý a nepoškozený.
• Adjust the distance between the scanner and the barcode for optimal reading.
• Avoid scanning at extreme angles; try to keep the scanner perpendicular to the barcode.
• For reflective surfaces, try tilting the scanner slightly to avoid glare.

5. Údržba

• Čištění:
  • Pravidelně čistěte skenovací okénko měkkým hadříkem, který nepouští vlákna.
  • Pro odolnou špínu lehceampOtřete hadřík vodou nebo jemným, neabrazivním čisticím prostředkem. Nestříkejte čisticí prostředek přímo na skener.
  • Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the scanner's surface or internal components.
• Skladování: Skener skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Péče o kabely: Neohýbejte ani nekruťte kabel USB nadměrně, mohlo by dojít k poškození vnitřních vodičů.
• Péče o stojan: Keep the autosense stand clean and free of obstructions to ensure the scanner can be placed and removed smoothly.

6. Řešení problémů

7. Specifikace

8. Záruka a podpora

For specific warranty information regarding your CipherLab 1500P HP barcode scanner, please refer to the warranty card included with your product or contact your point of purchase. Warranty terms may vary by region and reseller.

For technical support, driver downloads, or additional product documentation, please visit the official CipherLab website or contact their customer support directly. You may need your product model number (33-A1500PCBKU001) and serial number for support inquiries.

CipherLab Official Webmísto: www.cipherlab.com