1. Úvod
This manual provides comprehensive instructions for the setup, operation, and maintenance of your CipherLab 1504B Entry Level 2D Imager. The CipherLab 1504B is a high-performance 2D barcode scanner designed for efficient data capture in various environments, including retail, healthcare, and logistics. It is capable of reading both 1D and 2D barcodes quickly and accurately.
Obrázek 1: The CipherLab 1504B 2D Imager. This image displays the ergonomic design of the handheld scanner, featuring a trigger button and a scanning window at the front. The device is black with a yellow trigger accent.
2. Nastavení
2.1 Vybalení
Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda jsou přítomny následující položky:
- CipherLab 1504B 2D Imager
- USB kabel
- Stručný průvodce (pokud je součástí dodávky)
2.2 Připojení zařízení
- Locate an available USB port on your host computer.
- Connect the smaller end of the USB cable to the port at the base of the CipherLab 1504B imager.
- Connect the larger end of the USB cable to the USB port on your computer.
- The imager will power on automatically. Most operating systems will detect the device as a standard HID keyboard device and install necessary drivers automatically.
2.3 Počáteční konfigurace
The CipherLab 1504B is typically configured for standard operation out of the box. For specific settings or advanced configurations (e.g., changing symbologies, adding prefixes/suffixes), refer to the full programming manual or scan configuration barcodes provided by CipherLab. These barcodes are usually found in a separate programming guide.
3. Návod k obsluze
3.1 Základní postup skenování
- Ensure the imager is properly connected to your computer and powered on.
- Open an application where you wish to input scanned data (e.g., a text editor, spreadsheet, or POS software).
- Point the scanning window of the imager at the barcode you wish to scan.
- Press and hold the trigger button. A red aiming beam will appear.
- Vycentrujte zaměřovací paprsek nad čárovým kódem.
- Once the barcode is successfully read, the imager will emit a short beep and the LED indicator will flash green. The data will then be transmitted to your computer as if typed from a keyboard.
- Uvolněte spoušť.
3.2 Kontrolky a zvuky
- Green LED Flash & Short Beep: Úspěšné skenování.
- Red LED (Steady): Imager is powered on and ready.
- No LED / No Power: Zkontrolujte připojení USB.
4. Údržba
4.1 Cleaning the Imager
To ensure optimal performance, keep the scanning window clean. Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive cleaner. Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the device.
4.2 Skladování
Store the imager in a cool, dry place away from direct sunlight and extreme temperatures. Protect it from drops and impacts when not in use.
5. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Imager does not power on. | Loose USB connection; faulty USB port. | Ensure USB cable is securely connected to both the imager and the computer. Try a different USB port. |
| Imager scans but no data appears on screen. | Incorrect application focus; imager in wrong mode. | Ensure the cursor is active in the desired input field. Verify the imager is configured for HID keyboard emulation. |
| Imager does not read certain barcodes. | Barcode damaged or poorly printed; symbology disabled. | Try scanning a different, known-good barcode. Ensure the specific barcode symbology (e.g., QR Code, Data Matrix) is enabled in the imager's configuration. Clean the scanning window. |
| Naskenovaná data jsou nesprávná nebo zkomolená. | Keyboard layout mismatch; incorrect configuration. | Verify the keyboard layout setting on the imager matches your computer's keyboard layout (e.g., US English). Reconfigure the imager if necessary. |
6. Specifikace
- Číslo modelu: A1504B2BSU001
- Rozměry produktu: 10 x 2 x 2.7 palce
- Hmotnost položky: 7 unce
- Konektivita: USB
- Typ skeneru: 2D kamera
7. Záruka a podpora
Information regarding product warranty and technical support is typically provided in a separate warranty card or can be found on the official CipherLab website. Please refer to these resources for detailed warranty terms, registration, and contact information for technical assistance.
