Kungfuking B01LYLGNOC

Kungfuking Automatic Pop-Up Outlet Surge Protector User Manual

Model: B01LYLGNOC

1. Úvod

This manual provides instructions for the installation, operation, and maintenance of your Kungfuking Automatic Pop-Up Outlet Surge Protector. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Vlastnosti produktu

  • 4 US AC Outlets: 15A/125V/1875W capacity for standard electrical devices.
  • 2 USB porty: 2.4A total maximum output for charging mobile devices.
  • 1 RJ45 Port: Pro síťové připojení.
  • 1 HDMI port: For video and audio transmission.
  • 5W Wireless Charging Station: Integrated on the top surface for Qi-compatible devices.
  • Automatic Retractable Design: Pop-up and retract mechanism for discreet integration.

3. Bezpečnostní pokyny

  • The socket is non-waterproof. Protect it from water spray and liquids.
  • Install this product in a location inaccessible to children to ensure personal safety.
  • Always check for obstructions that could interfere with the unit's operation before use or retraction.
  • Používejte pouze uvnitř.
  • Do not disassemble or modify the unit. Refer to qualified personnel for repairs.
  • Ensure the power cord is not pinched or damaged during installation or use.

4. Nastavení

4.1 Požadované nástroje

  • Hole saw (4.7 inches / 120mm diameter)
  • Vrtat
  • Měřicí páska
  • Ochranné rukavice a ochrana očí

4.2 kroky instalace

  1. Připravte povrch: Choose a suitable location on your countertop, desk, or table. Ensure there is sufficient clearance below the surface for the unit to retract fully (approximately 5.90 inches / 150mm depth).Pop-up outlet dimensions and hole size

    Image: Diagram showing the pop-up outlet's dimensions, including a hidden length of 5.90 inches and a required hole diameter of 4.7 inches (±0.5 inches).

  2. Vyvrtejte díru: Using a 4.7-inch (±0.5 inches) hole saw, carefully drill a circular hole through the chosen surface.Diagram showing steps for drilling a hole and installing the pop-up outlet

    Image: Step-by-step diagram illustrating the installation process, starting with drilling a 4.8-inch diameter hole.

  3. Vložte jednotku: Unscrew and remove the retaining ring from the bottom of the pop-up outlet. Insert the main body of the outlet into the drilled hole from the top.
  4. Zajistěte jednotku: From underneath the surface, screw the retaining ring back onto the unit and tighten it securely to hold the pop-up outlet in place.
  5. Připojte napájení: Plug the power cord of the pop-up outlet into a standard 125V AC wall outlet.Pop-up outlet installed in a desk with devices charging

    Image: The pop-up outlet is shown installed in a desk, providing power and charging for a laptop and smartphone.

4.3 Instalační video

Video: This video demonstrates the installation process of the pop-up outlet, including drilling the hole and securing the unit.

5. Návod k obsluze

5.1 Extending the Unit

Gently press down on the top surface of the unit. The unit will automatically rise, revealing the AC outlets, USB ports, RJ45 port, and HDMI port.

Pop-up outlet extended on a desk with a laptop and coffee

Image: The pop-up outlet is shown in its extended position on a desk, ready for use.

5.2 Retracting the Unit

When not in use, gently push down on the top surface of the unit until it locks flush with the countertop. Ensure no cables are obstructing the retraction mechanism.

Pop-up outlet retracted flush with a kitchen island countertop

Image: The pop-up outlet is shown retracted and flush with a kitchen island countertop, maintaining a clean surface.

5.3 Bezdrátové nabíjení

Place your Qi-compatible smartphone or device on the top surface of the unit for 5W wireless charging. Remove phone cases thicker than 6mm for optimal charging performance.

Smartphone wirelessly charging on the pop-up outlet

Image: A smartphone is shown wirelessly charging on the top surface of the pop-up outlet.

6. Údržba

  • Clean the surface of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Regularly check the power cord for any signs of damage. If damaged, discontinue use and contact customer support.
  • Ensure the retraction mechanism is free from debris to prevent jamming.

7. Řešení problémů

ProblémMožná příčinaŘešení
Unit does not pop up/retract.Překážka v mechanismu.Check for and remove any debris or cables obstructing the unit.
No power from AC outlets/USB ports.Unit not plugged in or circuit breaker tripped.Ensure the unit is securely plugged into a live outlet. Check and reset the circuit breaker if necessary.
Bezdrátové nabíjení nefunguje.Device not Qi-compatible, misaligned, or phone case too thick.Ensure device supports Qi wireless charging. Reposition the device. Remove thick phone cases.

7.1 Troubleshooting Video

Video: This video addresses common issues such as the pop-up outlet not extending or retracting properly.

8. Specifikace

FunkceDetail
ModelB01LYLGNOC
AC zásuvky4 US Plugs (15A/125V/1875W)
USB porty2 USB (2.4A Total Max)
Datové porty1 RJ45, 1 HDMI
Bezdrátová nabíječka5W (Qi-compatible)
Požadovaný průměr otvoru4.7 inches (±0.5 inches)
Hidden Length5.90 palců
Rozměry produktu7.4 x 6.5 x 6.3 palce
Hmotnost položky1.61 libry
svtage125 voltů

9. Záruka a podpora

For warranty information or technical support, please contact Kungfuking customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.

Související dokumenty - B01LYLGNOC

Předview Kungfuking LED elektronické hodiny s bezdrátovým vibrátorem - Uživatelská příručka
Uživatelská příručka k elektronickým LED hodinám Kungfuking. Toto zařízení je vybaveno bezdrátovým vibrátorem, duálním budíkem, funkcí odložení buzení a integrovaným nabíjením se 2 zásuvkami a 3 USB porty. Obsahuje specifikace, pokyny k nastavení a návod k obsluze nastavení času, budíku, letního času a jasu.