Uživatelská příručka k rozhraní pro ovládání na volantu Connects2 CTSNS007.2

1. Úvod

This manual provides detailed instructions for the installation and operation of the Connects2 CTSNS007.2 Steering Wheel Control Interface. This device allows you to retain the use of your vehicle's factory steering wheel audio controls when upgrading to an aftermarket head unit. It is designed to seamlessly integrate with your vehicle's existing electrical system, providing a safe and convenient driving experience.

Please read this manual thoroughly before attempting installation or operation to ensure correct usage and to prevent damage to the product or your vehicle.

2. Bezpečnostní informace

• Doporučená profesionální instalace: Installation of this product requires technical knowledge of car electronics. If you are unsure, consult a qualified installer.
• Odpojit baterii: Před zahájením jakékoli elektrické instalace vždy odpojte záporný pól baterie vozidla, abyste předešli zkratu a poškození.
• Správné zapojení: Ensure all connections are made correctly according to the wiring diagram. Incorrect wiring can cause damage to the interface, head unit, or vehicle electronics.
• Zabezpečená připojení: Use appropriate connectors and ensure all wires are securely fastened to prevent loose connections and potential hazards.
• Vyhněte se překážkám: Route cables carefully to avoid interference with moving parts, pedals, or airbags.
• Vlhkost a teplo: Do not expose the interface to excessive moisture, dust, or extreme temperatures.

3. Obsah balení

Please check that all items are present before proceeding with the installation:

• Connects2 CTSNS007.2 Interface Module
• Vehicle Specific Wiring Harness
• Aftermarket Head Unit Patch Lead (may be sold separately or included)
• Návod k použití (tento dokument)

Image 1: Connects2 CTSNS007.2 Interface Module. This image shows the main interface module and its associated wiring harness, which connects to the vehicle's electrical system and the aftermarket head unit.

4. Kompatibilita s vozidly

The Connects2 CTSNS007.2 interface is compatible with the following Nissan vehicle models:

• Nissan Micra (2002 - 2007)
• Nissan Note (2005 - 2009)

This interface is designed to work with aftermarket head units that support a wired steering wheel control input. Please consult your aftermarket head unit's manual for compatibility with steering wheel control interfaces.

5. Instalační příručka

Důležité: It is highly recommended that this product be installed by a qualified automotive technician. Incorrect installation can lead to damage to the vehicle's electrical system or the interface itself.

5.1. Příprava

1. Ensure the vehicle's ignition is OFF and the keys are removed.
2. Odpojte záporný pól baterie vozidla.
3. Opatrně vyjměte tovární rádio z palubní desky. Konkrétní pokyny k demontáži rádia naleznete v servisní příručce vašeho vozidla.

5.2. Připojení vodičů

4. Connect the vehicle-specific wiring harness from the CTSNS007.2 interface to the corresponding connectors in the vehicle's dashboard. These typically include power, ground, and speaker wires.
5. Connect the aftermarket head unit patch lead (if separate) to the CTSNS007.2 interface module. This lead will then connect to the steering wheel control input on your aftermarket head unit. The connector type is typically Mini ISO or OEM Single DIN.
6. Connect the main power and speaker harness from the CTSNS007.2 interface to your aftermarket head unit.
7. Ujistěte se, že všechna připojení jsou pevná a izolovaná, aby se zabránilo zkratu.

5.3. Testování a opětovná montáž

8. Before fully reassembling the dashboard, reconnect the vehicle's negative battery terminal.
9. Zapněte zapalování vozidla a nainstalujte náhradní hlavní jednotku.
10. Test all steering wheel control buttons (volume up/down, track forward/back, mode, etc.) to ensure they function correctly with the new head unit.
11. If controls are not functioning, refer to the Troubleshooting section of this manual.
12. Once confirmed working, carefully reassemble the dashboard, ensuring no wires are pinched or damaged.

6. Provoz

Once installed, the Connects2 CTSNS007.2 interface will translate the signals from your vehicle's factory steering wheel controls into commands understood by your aftermarket head unit. The functionality of each button will typically correspond to its original function, such as:

• Zvýšení/Snížení hlasitosti: Zvyšuje nebo snižuje hlasitost zvuku.
• Track Up/Down (Seek): Skips to the next or previous track/station.
• Režim/zdroj: Cyklicky prochází dostupné zdroje zvuku (např. rádio, USB, Bluetooth, AUX).
• Ztlumit: Ztlumí nebo zapne zvuk.

Poznámka: Specific button functions may vary slightly depending on your vehicle's original steering wheel configuration and the capabilities of your aftermarket head unit. Some head units may require initial setup or programming to recognize the steering wheel controls. Refer to your aftermarket head unit's manual for details on configuring steering wheel controls.

7. Řešení problémů

If you encounter issues after installation, please refer to the following troubleshooting steps:

8. Specifikace

9. Záruka a podpora

Connects2 products are manufactured to high standards and undergo rigorous quality control. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Connects2 webmísto.

For technical support, installation assistance, or warranty claims, please contact your authorized Connects2 dealer or visit the Connects2 support portal online. Providing your product model number (CTSNS007.2) and vehicle details will help expedite your support request.

Oficiální web Connects2 Webmísto: www.connects2.com