Baseus GMSWA-01

Baseus SW Motion Sensing Vibrating Gamepad User Manual

Model: GMSWA-01

1. Úvod

Děkuji za nákupasing the Baseus SW Motion Sensing Vibrating Gamepad. This manual provides detailed instructions for the proper use, setup, and maintenance of your new gamepad. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

The Baseus SW Motion Sensing Vibrating Gamepad (Model: GMSWA-01) is designed for an immersive gaming experience, featuring motion sensing capabilities and vibration feedback. It comes in a transparent black finish, allowing a view of its internal components.

Baseus SW Motion Sensing Vibrating Gamepad, transparent black

Figure 1: Baseus SW Motion Sensing Vibrating Gamepad. This image shows the transparent black gamepad from an angled perspective, highlighting its internal circuitry and button layout.

2. Klíčové vlastnosti

3. Obsah balení

Po otevření balíku se prosím ujistěte, že jsou všechny položky přítomny a v dobrém stavu:

Baseus Gamepad with packaging and Type-C cable

Figure 2: Package contents. The image displays the Baseus gamepad, its retail packaging, and the included Type-C charging cable.

4. Nastavení a připojení

4.1 Nabíjení gamepadu

  1. Locate the Type-C charging port on the gamepad.
  2. Connect the provided Type-C cable to the gamepad's charging port.
  3. Druhý konec kabelu připojte ke kompatibilnímu zdroji napájení USB (např. USB port počítače, USB adaptér do zásuvky).
  4. The indicator light on the gamepad will illuminate to show charging status. It will turn off or change color when fully charged.

4.2 Spárování se zařízením

The Baseus SW Gamepad is designed for use with compatible gaming consoles or devices. Specific pairing instructions may vary slightly depending on your device.

  1. Ujistěte se, že je gamepad dostatečně nabitý.
  2. Turn on your gaming console or device.
  3. On the gamepad, press and hold the pairing button (refer to the button layout diagram in Section 5.1 for location) for a few seconds until the indicator lights begin to flash rapidly. This indicates the gamepad is in pairing mode.
  4. On your console/device, navigate to the Bluetooth or controller settings and select "Pair New Device" or similar option.
  5. Select "Baseus SW Gamepad" from the list of available devices.
  6. Once successfully paired, the indicator lights on the gamepad will stop flashing and remain solid.
Baseus Gamepad being used with a Nintendo Switch console

Figure 3: Gamepad in use with a gaming console. This image shows a user holding the Baseus gamepad while a Nintendo Switch console is docked and displaying a game.

5. Ovládání gamepadu

5.1 Rozložení a funkce tlačítek

Familiarize yourself with the gamepad's button layout:

Button/ComponentFunkce
Levá analogová pákaMovement, camera control
Pravá analogová pákaCamera control, aiming
D-Pad (směrový ovladač)Menu navigation, specific actions
Tlačítka A/B/X/YAction buttons (context-dependent)
L/R ButtonsRamenní knoflíky
ZL/ZR TriggersTrigger buttons (e.g., shooting, accelerating)
Tlačítko DomůReturn to console home screen
Tlačítko ScreenshotZachyťte snímky obrazovky
Plus (+) / Minus (-) ButtonsStart/Select or menu options
Turbo Button (if applicable)Enables rapid fire for assigned buttons (check specific model features)

5.2 Motion Sensing

The gamepad features built-in gyroscopes and accelerometers for motion sensing. This allows for intuitive control in games that support motion input. Calibrate the motion sensors if you experience inaccurate tracking by following your console's calibration procedure.

5.3 Vibrační zpětná vazba

The gamepad provides haptic feedback through vibrations, enhancing immersion during gameplay. The intensity of vibration is typically controlled by the game or console settings.

6. Péče a údržba

7. Řešení problémů

ProblémMožná příčina / řešení
Gamepad does not turn on.Battery is depleted. Charge the gamepad fully.
Gamepad does not connect to console/device.
  • Ensure the gamepad is in pairing mode.
  • Check if the console's Bluetooth is enabled.
  • Move the gamepad closer to the console.
  • Remove previous pairings from the console and re-pair.
  • Restart both the gamepad and the console.
Tlačítka nebo analogové páčky nereagují.
  • Ujistěte se, že je gamepad správně připojen.
  • Check for physical obstructions or damage.
  • Restart the gamepad and console.
  • Update console/gamepad firmware if available.
Motion sensing is inaccurate.Recalibrate the motion sensors through your console's settings.
Vibrační zpětná vazba nefunguje.
  • Check game settings to ensure vibration is enabled.
  • Check console settings for vibration options.

8. Specifikace produktu

AtributDetail
ZnačkaBaseus
Název modeluGMSWA-01 (GS01)
MateriálPC
BarvaPrůhledná černá
Kapacita baterie550mAh/3.7V
VstupType-C input 5V 550mAh
Jmenovitý provozní proud35 mA
Rozměry produktu (D x Š x V)156.2 mm x 101.0 mm x 64.8 mm
Hmotnost produktu207.5 g (bez obalu)
Speciální funkceMotion Sensing, Vibrating

9. Informace o záruce

Baseus products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Baseus webmísto.

10. Zákaznická podpora

If you encounter any issues or have questions regarding your Baseus SW Motion Sensing Vibrating Gamepad that are not addressed in this manual, please contact Baseus customer support. You can typically find contact information on the official Baseus webmístě nebo na obalu produktu.

Online podpora: Visit the official Baseus webweb s častými dotazy, ovladači ke stažení a zdroji podpory.

E-mailová podpora: Refer to your product's warranty card or the Baseus webweb pro e-mailovou adresu zákaznického servisu.

Související dokumenty - GMSWA-01

Předview Baseus Car Wireless MP3 Charger - Model PB3062Z User Manual
User manual for the Baseus Enjoy Car Wireless MP3 Charger (Model PB3062Z) with Bluetooth 5.0, supporting wireless charging and USB fast charging. Includes product parameters, usage instructions, and safety tips.
Předview Baseus Palm CCZC20CE 20W USB-C Greitasis klíče: Trumpas Pradžios Vadovas
Vadovas su naudojimo instrukcijomis, techniniais parametrais ir garantijos sąlygomis Baseus Palm CCZC20CE 20W USB-C Greitajam įkrovikliui. Sužinokite, kaip saugiai ir efektyviai naudoti jūsų Baseus įkroviklį.
Předview Uživatelská příručka k magnetickému ventilátoru na zadní sedadlo Baseus CXZR-01 Natural Wind
Uživatelská příručka k magnetickému ventilátoru na zadní sedadla Baseus CXZR-01 Natural Wind s podrobným popisem funkcí, specifikací, pokynů k použití a informací o záruce. Tento přenosný ventilátor nabízí dvě rychlostní stupně a magnetické uchycení na opěrky hlavy v automobilu.
Předview Uživatelská příručka k bezdrátovým sluchátkům s potlačením hluku Baseus Bowie H1i
Komplexní uživatelská příručka pro bezdrátová sluchátka s potlačením hluku Baseus Bowie H1i, která zahrnuje nastavení, ovládání, funkce a bezpečnostní pokyny.
Předview Uživatelská příručka k open-ear TWS sluchátkům Baseus PM138 | Nabíjení, vyhledávání, specifikace, bezpečnost
Oficiální uživatelská příručka pro sluchátka Baseus Open-Ear TWS model PM138. Mezi funkce patří indikátor nabíjení, funkce „Najít“ sluchátko, podrobné technické specifikace, požadavky na napájení, bezpečnostní pokyny a informace o shodě s předpisy.
Předview Baseus S1 Pro Беспроводные Наушники: Руководство Пользователя и Характеристики
Полное руководство пользователя для беспроводных наушников Baseus S1 Pro. Узнайте о характеристиках, подключении, управлении и комплектации.